MYMGK1R806FRSR-EVM Murata

MYMGK1R806FRSR/MYMGK00506ERSR MonoBK, 6A DC-DC Converter Series PRODUCT OVERVIEW The MYMGK1R806FRSR/MYMGK00506ERSR are miniature MonoBK called Mono Block, non-isolated Point-of-Load (PoL) DC-DC power converters for embedded applications. Typical unit The small form factor measures only 9.0 x 7.5 x 5.0 mm. FEATURES Applications include powering FPGA/CPUs, datacom/telecom Settable output voltage range systems, Distributed Bus Architectures (DBA), programmable logic and mixed voltage systems. MYMGK1R806FRSR: 0.7 to 1.8Vdc The converters have input voltage ranges of 4.5 to 8.0Vdc MYMGK00506ERSR: 0.7 to 5.0Vdc (MYMGK1R806FRSR) or 8.0 to 15.0Vdc Up to 6A of output current (MYMGK00506ERSR) and a maximum output current of 6A. Quick response to load change Based on a fixed frequency synchronous buck converter Ultra small surface mount package switching topology, this high power conversion efficient PoL 9.0 x 7.5 x 5.0mm module features settable output voltage 0.7 to 1.8Vdc High efficiency of 97.5% (MYMGK1R806FRSR) or 0.7 to 5.0Vdc (MYMGK00506ERSR), On/Off control and Power Good signal output. Outstanding thermal derating performance These converters also include under voltage lock out (UVLO), Over current protection output short circuit protection and over-current protection. On/Off control (Positive logic) Power Good signal High Reliability / Heat Shock Testing 700cycle (-40 to +125degC) Meets CISPR 22 class B conducted emission SIMPLIFIED APPLICATION MYMGK1R806FRSR/MYMGK00506ERSR Vout Vin Vout Vin Sense ON/OFF Cin Co Trim 5V GND Power Good MYMGK1R806FRSR MYMGK00506ERSR Cin: 47uF/10V x 2pcs Cin: 22uF/25V x 2pcs Co: 220uF/4V x 2pcs Co: 220uF/4V x 2pcs (at Vout=0.7-3.0V) 100uF/6.3V x 4pcs (at Vout=3.0-5.0V) (Typical topology is shown. Murata recommends an external input fuse.) Export Control Code : X0863Document No : DC R140212 MYMGK1R806FRSR/MYMGK00506ERSR MonoBK, 6A DC-DC Converter Series PERFORMANCE SPECIFICATIONS SUMMARY AND ORDERING GUIDE (Including series products) OUTPUT INPUT PACKAGE Efficiency Regulation(max.) ON/OFF PART NUMBER Vout Power R/N typ. Vin typ. Range Iin no load Iin full load Iout (%) (mm) (Vdc) (A,max.) (W) (% of Vout) Line(%) Load(%) (Vdc) (Vdc) (mA) (A) Yes 0.7-1.8 MYMGK1R806FRSR 6 11 0.5 1.0 1.0 5 4.5-8.0 13 2.4 90 9.0 x 7.5 x 5.0 (typ.:1.8V) (Positive) 0.7-5.0 Yes MYMGK00506ERSR 6 30 0.4 1.0 1.0 12 8-15 24 2.6 95 9.0 x 7.5 x 5.0 (typ.:5.0V) (Positive) Yes 0.7-1.8 MYMGK1R806FRSRD 6 11 0.5 1.0 1.0 5 4.5-8.0 13 2.4 90 9.0 x 7.5 x 5.0 (typ.:1.8V) (Positive) Yes 0.7-5.0 MYMGK00506ERSRD 6 30 0.4 1.0 1.0 12 8-15 24 2.6 95 9.0 x 7.5 x 5.0 (typ.:5.0V) (Positive) 1.All specifications are at typical line voltage, Vout = typ. and full load, +25degC unless otherwise noted. Output capacitors are 100uF x 4 or 220uF x 2 ceramic. Input capacitors are 47uF x 2 or 22uF x 2 ceramic and plenty electrolytic capacitors. See detailed specifications Input and Output capacitors are necessary for our test equipment. 2.Use adequate ground plane and copper thickness adjacent to the converter. PART NUMBER STRUCTURE MY MGK 1R8 06 F R S R D Murata products Internal Code Packaging Code Blank: Standard Quantity Internal Code Series Name D: Small Quantity Recommended Input Voltage Range F:4.5V-8V typ. Maximum Output Voltage E:8-15V typ. ON/OFF Control Logic 1R8:1.8V S:Positive Logic 005:5.0V Maximum Output Current 06:6A Product Marking Part Number Product Code Because of the small size of these products, the product MYMGK1R806FRSR 1R806FRS marking contains a character-reduced code to indicate the MYMGK00506ERSR 00506ERS model number and manufacturing date code. Not all items on MYMGK1R806FRSRD 1R806FRS the marking are always used. Please note that the marking MYMGK00506ERSRD 00506ERS differs from the product photograph. Here is the layout of the Marking. Codes Layout 1Pin Marking M 1R8 C M C 06FRS 1R806FRS Product code (Please see product code table beside) Internal manufacturing code