NFG0QHB372HS2D Murata

Reference Only Spec No. JEFL243D-0012B-01 P1/11 Common Mode Noise Filter NFG0QHBHS2 Reference Specification 1. Scope This reference specification applies to Common Mode Noise Filter NFG0QHBHS2 Series for differential signal interface in Electronics. 2. Part Numbering (Ex.) NF G 0Q HB 242 H S 2 D Product Type Dimension Application *Resonant Performance Category Number Packaging ID (L W) and frequency of line D: taping characteristic *B: bulk *Resonant frequency (MHz) The first and second figures are significant digits, and the third figure expresses the number of zeros that follow the two figures. *B: Bulk packing is also available. 3. Part Number and Rating Operating temperature range -40C to +85C Storage temperature range -40C to +85C Common Mode Rated Withstanding Rated DC Insulation Impedance Voltage Voltage Current Resistance Resistance Customer MURATA (VDC) ( ) (VDC) (mA) () (M min.) Part Number Part Number at 100MHz Typ. NFG0QHB242HS2D 15 5 12.5 100 2.525% 100 NFG0QHB372HS2D 9 5 12.5 100 1.925% 100 NFG0QHB542HS2D 5 5 12.5 100 1.325% 100 Common Mode Insertion Loss Characteristic Cut off Frequency MURATA (dB) Typ. (GHz) Part Number 2.4 3.7 5.4 Typ. GHz GHz GHz NFG0QHB242HS2D 33 - - 8 NFG0QHB372HS2D - 30 - 11 NFG0QHB542HS2D - - 27 18 4. Testing Conditions Unless otherwise specified Temperature: ordinary temperature (15C to 35C) Humidity: ordinary humidity 25% to 85% (RH) In case of doubt Temperature: 20C2C Humidity: 60% to 70% (RH) Atmospheric pressure: 86 kPa to 106 kPa MURATA MFG.CO., LTD Reference Only Spec No. JEFL243D-0012B-01 P2/11 5.Style and Dimensions Equivalent Circuits Unit Mass(Typical value) 0.0003g 6. Marking No marking. 7. Electrical Performance No. Item Specification Test Method 7.1 Common Mode Meet item 3. Measuring Frequency : 1001MHz Impedance Measuring Equipment : KEYSIGHT4991A or the equivalents (In case of doubt in standard condition, the heat treatment(200C, about 10 minutes)shall be applied. (ref. Appendix) 7.2 Withstanding Products shall not be damaged. Test Voltage : 2.5 times for Rated Voltage Voltage Time : 1 to 5 s Charge Current : 1 mA max. (ref. Appendix) 7.3 DC Resistance Meet item 3. Measuring current : 20mA max. (ref. Appendix) Insulation Meet item 3. Measuring voltage : Rated Voltage 7.4 Resistance Measuring time : 3 s max. (ref. Appendix) MURATA MFG.CO., LTD