NMG1512SC Murata

NMG Series www.murata-ps.com Isolated 2W Single Output DC/DC Converters SELECTION GUIDE Order Code V V mA mA % mVp-p % % pF kHrs NMG0505SC 5 5 400 470 5.7 7.3 28 35 81 83 33 3956 NMG0509SC 5 9 222 455 4.2 5.9 20 25 84 86.5 40 3682 NMG0512SC 5 12 167 450 3.8 5.1 18 25 84 87.5 40 3299 NMG0515SC 5 15 133 450 3.4 4.5 16 25 84 87.5 40 2833 FEATURES NMG0524SC 5 24 83 465 4.3 6 35 60 82 85 35 2189 UL 60950 recognised NMG1205SC 12 5 400 200 4.2 4.9 22 35 81 83.5 40 2519 Efciency from 80% NMG1209SC 12 9 222 190 2.6 3.1 16 25 83 87 61 2405 NMG1212SC 12 12 167 190 2.4 2.9 13 25 85 88 74 2235 Wide temperature performance at full NMG1215SC 12 15 133 185 2.0 2.4 12 25 85 88 68 2011 2 Watt load, 40C to 85C NMG1224SC 12 24 83 190 2.6 4 25 40 84 86.5 60 2189 UL 94V-0 package material NMG1505SC 15 5 400 160 4.3 6 40 60 80 83 40 3963 NMG1509SC 15 9 222 155 2.9 4.5 25 40 82 86.5 55 3176 Industry standard pinout NMG1512SC 15 12 167 150 2.4 3.5 25 40 84 87.5 65 2875 1kVDC isolation NMG1515SC 15 15 133 150 2.3 3.5 25 40 84 88 75 2483 NMG2405SC 24 5 400 100 4.1 6 40 70 80 84 45 3659 5V, 12V, 15V & 24V input NMG2409SC 24 9 222 95 2.6 4 30 50 84 87.5 55 2496 5V, 9V, 12V, & 15V output NMG2412SC 24 12 167 95 2.1 3.5 25 50 84 88 75 3824 Internal SMD construction NMG2415SC 24 15 133 95 2 3.5 30 50 85 88.5 85 3500 When operated with additional external load capacitance the rise time of the input voltage will determine the maximum external Fully encapsulated with toroidal capacitance value for guaranteed start up. The slower the rise time of the input voltage the greater the maximum value of the additional external capacitance for reliable start up. magnetics No external components required INPUT CHARACTERISTICS Parameter Conditions Min. Typ. Max. Units MTTF up to 3.9 million hours Continuous operation, 5V input types 4.5 5 5.5 V Pin compatible with NMR series Continuous operation, 12V input types 10.8 12 13.2 Voltage range Continuous operation, 15V input types 13.5 15 16.5 No electrolytic or tantalum capacitors Continuous operation, 24V input types 21.6 24 26.4 Reected ripple current 7.5 15 mA p-p PRODUCT OVERVIEW The NMG series of DC/DC Converters is ABSOLUTE MAXIMUM RATINGS particularly suited to isolating and/or converting Lead temperature 1.5mm from case for 10 seconds 260C DC power rails. The galvanic isolation allows the Internal power dissipation 550mW device to be congured to provide an isolated Input voltage VIN, NMG05 types 7V negative rail in systems where only positive rails Input voltage VIN, NMG12 types 15V exist. The wide temperature range guarantees Input voltage VIN, NMG15 types 18V startup from 40C and full 2 watt output at 85C. Input voltage VIN, NMG24 types 28V Pin compatibility with the NMR and MER1 series ensures ease of upgradeability. OUTPUT CHARACTERISTICS Parameter Conditions Min. Typ. Max. Units Rated Power TA=-40C to 85C 2W Voltage Set Point Accuracy See tolerance envelope Line regulation High VIN to low VIN 1.05 1.2 %/% 1. See Ripple & Noise characterisation method. 2. Calculated using MIL-HDBK-217F FN2 with nominal input voltage at full load. All specications typical at TA=25C, nominal input voltage and rated output current unless otherwise specied. For full details go to www.murata-ps.com/rohs www.murata-ps.com/support KDC NMG.E02 Page 1 of 7 Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Load Regulation (Typ) Load Regulation (Max) Ripple & Noise 1 (Typ) Ripple & Noise 1 (Max) Efciency (Min.) Efciency (Typ.) Isolation Capacitance 2 MTTFNMG Series www.murata-ps.com Isolated 2W Single Output DC/DC Converters ISOLATION CHARACTERISTICS Parameter Conditions Min. Typ. Max. Units Isolation test voltage Flash tested for 1 second 1000 VDC Resistance Viso= 1000VDC 10 G GENERAL CHARACTERISTICS Parameter Conditions Min. Typ. Max. Units 24V output types 70 Switching frequency kHz All other types 60 TEMPERATURE CHARACTERISTICS Parameter Conditions Min. Typ. Max. Units Specication All output types -40 85 Storage -50 125 C Case Temperature above 5V input types and 5V output types 30 ambient All other types 25 Cooling Free air convection EFFICIENCY VS LOAD 5V Input 12V Input 90 90 80 80 70 70 NMG0512SC NMG1205SC 60 NMG0505SC 60 NMG1209SC NMG0509SC NMG1212SC 50 NMG0515SC 50 NMG1215SC NMG0524SC 40 NMG1224SC 40 30 30 20 20 10 10 0 0 0 10 20304050 607080 90 100 0 10 20304050 607080 90 100 Load (%) Load (%) 15V Input 24V Input 90 90 80 80 70 70 NMG2405SC NMG2409SC NMG1505SC 60 60 NMG2412SC NMG1509SC NMG2415SC 50 50 NMG1512SC NMG1515SC 40 40 30 30 20 20 10 10 0 0 0 10 20304050 607080 90 100 0 10 20304050 607080 90 100 Load (%) Load (%) www.murata-ps.com/support KDC NMG.E02 Page 2 of 7 Efciency (%) Efciency (%) Efciency (%) Efciency (%)