Chip radial type NTC thermistor 1. Part Numbering (Part Number) NXR T 15 XM 202 E A 1 B 010 Product ID Individual Chip Temperature Resistance Resistance Lead wire Lead wire Packaging Dimensions specifications dimensions characteristics tolerance specifications forming (Full length) 2. Part No. and ratings Operating Operating B-constant current Murata P/N Resistance value 25/50C for sensor temperature range (*1) at.25 (mA) (*2,*3) NXRT15XM202EA1B*** 2k +/-3% 3500K +/-1% 0.27 NXRT15XV502FA1B*** 5k +/-1% 3936K +/-1% 0.17 NXRT15XH103FA1B*** 10k +/-1% 3380K +/-1% 0.12 NXRT15XV103FA1B*** 10k +/-1% 3936K +/-1% 0.12 -40+125 NXRT15WB333JA1B*** 33k +/-5% 4050K +/-3% 0.07 NXRT15WB473FA1B*** 47k +/-1% 4050K +/-1% 0.06 NXRT15WF104FA1B*** 100k +/-1% 4250K +/-1% 0.04 Thermaldissipationconstant 1.5mW/(*4) Ratedelectricpower 7.5mW(*2,4) Thermaltimeconstant 4sec.(25to50inair) *1 : *** means the full lengthExample040=40mm1040mm Interval 10mm. *2 : Measured at 25C in still air, as a single unit without mounting. *3 : Operating current rises for sensor rises thermistors temperature by 0.1C. Please regard self heat of the Chip Radial. *4 : Too rapid temperature rising, however, may cause any unexpected failures on your circuit. Please do not apply high electric power in short time. Murata Manufacturing Co.,Ltd. JWB01BU-0094 This information may be changed without a previous notice. 3. Construction and dimensionsin mm Dimens ions Notes (mm) D 4mm Max. Resin width T 2mm Max. Resin thickness L 10 to 401mm Full length F 2.51mm Lead spacing d 0.400.05 mm Lead wire diameter A - Epoxy resin Copper-clad Fe wire, tinned B- Sn *The NTC thermistor in epoxy resin is soldered by Sn-10Sb 4. Quantity (Standard Quantity) 500pcs.unit bag. Murata Manufacturing Co.,Ltd. JWB01BU-0094 This information may be changed without a previous notice.