OKL2-T/12-W5 Series www.murata-ps.com Programmable Output 12-Amp iLGA SMT PoL DC-DC Converter Series TTypical unitypical unit FEATURES PRODUCT OVERVIEW The OKL2-T/12-W5 series are miniature non- The wide input range is 2.4 to 5.5Volts DC. iLGA inspectable Land Grid Array isolated point-of-Load(PoL) DC-DC power Convert- The maximum output current is 12Amps. Based 2.4-5.5Vdc input voltage range ers for embedded applications. The tiny form factor on xed-frequency synchronous buck converter Programmable output voltage from 0.6-3.63Vdc is con gured on a Land Grid Array (LGA) assembly switching topology, the high power conversion measuring only 0.8 x 0.45 x0.34 inches (20.32 x ef cient Point of Load (PoL) module features pro- Drives 1000F ceramic capacitive loads 11.43 x 8.55 mm). Applications include powering grammable output voltage and On/Off control. High power conversion ef ciency at 94% CPUs, datacom/telecom systems, distributed bus These converters also include under voltage lock Outstanding thermal derating performance architectures (DBA), programmable logic and mixed out (UVLO), output short circuit protection, over- voltage systems. current and over temperature protections. Over temperature and over current protection On/Off control RoHS-6 hazardous substance compliance Optional Sequence/Tracking operation Connection Diagram +Vin +Vout t 4XJUDIJOH F1 On/Off Control t JMUFST Controller t VSSFOU 4FOTF External Trim DC Power Reference and Open = On Source Error Amplier Closed = Off (Positive On/Off) Common Common 4FRVFODF 5SBDLJOH Power Good Figure 1. OKL2-T/12-W5 Note: Murata Power Solutions strongly recommends an external input fuse, F1. See speci cations. For full details go to www.murata-ps.com/rohs www.murata-ps.com/support MDC OKL2-T/12-W5.B03 Page 1 of 17OKL2-T/12-W5 Series Programmable Output 12-Amp iLGA SMT PoL DC-DC Converter Series PERFORMANCE SPECIFICATIONS SUMMARY AND ORDERING GUIDE Output Input Dimensions Ef ciency (%) R/N Model Number Regulation (max.) Vout Iout (Amps, Power Vin nom. Range Iin, no load Iin, full load (mV p-p) Inches (mm) (Volts) max.) (Watts) (Volts) (Volts) (mA) (Amps) Line Load Min. Typ. Max. OKL-T/12-W5P-C Pos. no OKL-T/12-W5N-C Neg. no 0.8 x 0.45 x 0.34 0.6-3.63 12 39.6 30 0.6% 0.25% 5 2.4-5.5 30 8.43 91.5 94.0 (20.32 x 11.43 x 8.55) OKL2-T/12-W5P-C Pos. yes OKL2-T/12-W5N-C Neg. yes The output range is limited by Vin. See detailed specs. Use adequate ground plane and copper thickness adjacent to the converter. All speci cations are at nominal line voltage, Vout=nominal (3.3V) and full Ripple and Noise (R/N) and no-load input current are shown at Vout=1V. load, +25C. unless otherwise noted. See specs for details. Output capacitors are 94 F ceramic. Input cap is 22 F. See detailed speci cations. I/O caps are necessary for our test equipment and may not be needed for your application. PART NUMBER STRUCTURE OK L 2 - T / 12 - W5 N - C Okami Non-isolated PoL LGA Surface Mount Sequence/tracking RoHS Hazardous Blank = Not Installed Substance Compliance 2 = installed C = RoHS-6 (does not claim EU RoHS exemption 7b lead in solder) Trimmable Output Voltage Range On/Off Logic 0.6 - 3.63Vdc P = Positive Logic N = Negative Logic Maximum Rated Output Input Voltage Range Current in Amps 2.4 - 5.5Vdc Product Label Because of the small size of these products, the product label contains a Model Number Product Code OKL-T/12-W5P-C L01012 character-reduced code to indicate the model number and manufacturing date OKL-T/12-W5N-C L00012 code. Not all items on the label are always used. Please note that the label OKL2-T/12-W5P-C L21012 differs from the product photograph. Here is the layout of the label: OKL2-T/12-W5N-C L20012 The manufacturing date code is four characters: XXXXXX Product code Mfg. First character Last digit of manufacturing year, example 2009 date YMDX Rev. Revision level Second character Month code (1 through 9 = Jan-Sep code O, N, D = Oct, Nov, Dec) Figure 2. Label Artwork Layout Third character Day code (1 through 9 = 1 to 9, 10 = 0 and 11 through 31 = A through Z) The label contains two rows of information: Fourth character Manufacturing information First row Model number product code (see table) Second row Manufacturing date code and revision level www.murata-ps.com/support MDC OKL2-T/12-W5.B03 Page 2 of 17 On/Off Logic Seq/ Track