OKY-T/16-D12P-C Murata

OKY-T/10 & T/16-D12 Series www.murata-ps.com Programmable DOSA-SMT 10/16-Amp DC/DC Converters PRODUCT OVERVIEW The OKY-T/10 and -T/16 series are miniature ef cient Point of Load (POL) module features pro- SMT non-isolated Point-of-Load (POL) DC/DC power grammable output voltage and On/Off control. An converters for embedded applications. The module optional Sequence/Tracking input allows controlled is fully compatible with Distributed-power Open ramp-up and ramp-down outputs. The Sense input Standards Alliance (DOSA) industry-standard provides remote sense. These converters also speci cations (www.dosapower.com). Applications include under voltage lock out (UVLO), output short include powering CPUs, datacom/telecom systems, circuit protection, over-current and over tempera- TTypical unitypical unit programmable logic and mixed voltage systems. ture protections. The wide input range is 8.3 to 14 Volts DC. Two These units are designed to meet all standard maximum output currents are offered, 10 Amps UL/EN/IEC 60950-1 safety and FCC EMI/RFI (T/10 models) or 16 Amps (T/16 models). Based emissions certi cations and RoHS-6 hazardous on xed-frequency synchronous buck converter substance compliance. switching topology, the high power conversion FEATURES Wide 8.3-14 VDC input range Non-isolated output adjustable from 0.7525 to 5.5 Volts up to 16 Amps Contents Page DOSA-compatible SMT package Description, Connection Diagram, Photograph 1 Optional sequence/tracking operation Ordering Guide, Model Numbering 2 Outstanding thermal performance and derating Mechanical Speci cations, Input/Output Pinout 3 Short circuit protection Detailed Electrical Speci cations 4 Output Voltage Adjustment, Soldering Guidelines 5 On/Off control Application Notes 6 High ef ciency up to 94.5% Performance Data OKY2-T/10-D12 9 Over temperature protection Performance Data and Oscillograms OKY2-T/16-D12 11 Tape and Reel Information 16 Meets UL/EN/IEC 60950-1 safety approvals. Product Label, MTBF Table 17 Simpli ed Block Diagram +Vin +Vout t
4XJUDIJOH F1 On/Off Sense Control t
' JMUFST Controller t
$VSSFOU
4FOTF External Trim DC Power Reference and Open = On Source Error Amplier Closed = Off (Positive On/Off) Common Common Figure 1. OKY-T/10, -T/16 Sequence/Tracking (OKY2 only) Note: Murata Power Solutions strongly recommends an external input fuse, F1. See speci cations. For full details go to www.murata-ps.com/rohs www.murata-ps.com/support MDC_OKY_T10T16.D12.A08 Page 1 of 17OKY-T/10 & T/16-D12 Series Programmable DOSA-SMT 10/16-Amp DC/DC Converters Performance Speci cations Summary and Ordering Guide ORDERING GUIDE Output Input Package, C83 IOUT R/N (mVp-p) Regulation (Max.) VIN IIN, IIN, Ef ciency VOUT (Amps Power Nom. Range no load full load Model Number (Volts) max) (Watts) Max. Line Load (Volts) (Volts) (mA) (Amps) Min. Typ. Case Pinout 1.3x0.53x0.33 OKY-T/10-D12P-C 0.7525-5.5 10 50 40 0.15% 0.25% 12 8.3-14 80 4.41 93% 94.5% Pos. No P66 (33x13.5x8.4) 1.3x0.53x0.33 OKY-T/10-D12N-C 0.7525-5.5 10 50 40 0.15% 0.25% 12 8.3-14 80 4.41 93% 94.5% Neg. No P66 (33x13.5x8.4) 1.3x0.53x0.33 OKY2-T/10-D12P-C 0.7525-5.5 10 50 40 0.15% 0.25% 12 8.3-14 80 4.41 93% 94.5% Pos. Yes P66 (33x13.5x8.4) 1.3x0.53x0.33 OKY2-T/10-D12N-C 0.7525-5.5 10 50 40 0.15% 0.25% 12 8.3-14 80 4.41 93% 94.5% Neg. Yes P66 (33x13.5x8.4) 1.3x0.53x0.33 OKY-T/16-D12P-C 0.7525-5.5 16 80 40 0.22% 0.25% 12 8.3-14 80 7.09 92.5% 94% Pos. No P66 (33x13.5x8.4) 1.3x0.53x0.33 OKY-T/16-D12N-C 0.7525-5.5 16 80 40 0.22% 0.25% 12 8.3-14 80 7.09 92.5% 94% Neg. No P66 (33x13.5x8.4) 1.3x0.53x0.33 OKY2-T/16-D12P-C 0.7525-5.5 16 80 40 0.22% 0.25% 12 8.3-14 80 7.09 92.5% 94% Pos. Yes P66 (33x13.5x8.4) 1.3x0.53x0.33 OKY2-T/16-D12N-C 0.7525-5.5 16 80 40 0.22% 0.25% 12 8.3-14 80 7.09 92.5% 94% Neg. Yes P66 (33x13.5x8.4) Dimensions are in inches (mm). Use adequate ground plane and copper thickness adjacent to the converter. The input voltage range must be 13.2 Volts max. for Vout >= 3.63 V. Ripple and Noise (R/N) is shown at Vout=1V. See specs for details. All specifications are at nominal line voltage, Vout=nominal (5V for D12 models) and full load, +25 deg.C. unless otherwise noted. Output capacitors are 1 F ceramic and 10 F electrolytic in parallel. Input cap is 22 F. See detailed specifications. I/O caps are necessary for our test equipment and may not be needed for your application. PART NUMBER STRUCTURE OK Y 2-/T 16 - D12 P - C Okami Non-isolated PoL RoHS Hazardous Substance Compliance C = RoHS-6 (does not claim EU RoHS exemption 7blead in solder) Surface Mount Sequence/tracking On/Off Polarity Blank=Not installed, delete seq/track contact P = Positive Polarity 2=Installed, add seq/track contact N = Negative Polarity Trimmable Output Voltage Range Input Voltage Range D12 Models = 0.7525-5.5V D12 = 8.3-14V Maximum Rated Output Current in Amps www.murata-ps.com/support MDC_OKY_T10T16.D12.A08 Page 2 of 17 On/Off Polarity Sequence/ Track