RFM products are now Murata products. RO3101 Ideal for 433.92 MHz Transmitters Very Low Series Resistance Pb 433.92 MHz Quartz Stability Rugged, Hermetic, Low-Profile TO39 Case SAW Complies with Directive 2002/95/EC (RoHS) The RO3101 is a true one-port, surface-acoustic-wave (SAW) resonator in a low-profile TO39 case. It Resonator provides reliable, fundamental-mode, quartz frequency stabilization of fixed-frequency transmitters operating at 433.92 MHz. The RO3101 is designed specifically for remote-control and wireless security transmitters operating in Europe under ETSI I-ETS 300 220 and in Germany under FTZ 17 TR 2100. Absolute Maximum Ratings Rating Value Units CW RF Power Dissipation +0 dBm DC Voltage Between Any Two Pins 30 VDC Case Temperature -40 to +85 C TO39-3 Case Soldering Temperature (10 seconds / 5 cycles Max.) 260 C Electrical Characteristics Characteristic Sym Notes Minimum Typical Maximum Units Center Frequency (+25 C) Absolute Frequency f 433.845 433.995 MHz C 2, 3, 4, 5 Tolerance from 433.920 MHz f 75 kHz C Insertion Loss IL 1.5 2.0 2, 5, 6 dB Quality Factor Unloaded Q Q 7400 U 5, 6, 7 50 Loaded Q Q 900 L Temperature Stability Turnover Temperature T 10 25 40 C O Turnover Frequency f 6, 7, 8 f + 2.7 kHz O c 2 Frequency Temperature Coefficient FTC 0.037 ppm/C Frequency Aging Absolute Value during the First Year f 1 10 ppm/yr A DC Insulation Resistance between Any Two Pins 5 1.0 M RF Equivalent RLC Model Motional Resistance R 13.7 M Motional Inductance L 5, 7, 9 37.1 H M Motional Capacitance C 3.6 fF M Pin 1 to Pin 2 Static Capacitance C 5, 6, 9 2.7 pF O Transducer Static Capacitance C 5, 6, 7, 9 2.5 pF P Test Fixture Shunt Inductance L 2, 7 50.0 nH TEST Lid Symbolization (in Addition to Lot and/or Date Codes) RFM RO3101 CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. NOTES: 1. Frequency aging is the change in f with time and is specified at +65C or subject to change without notice. C 7. Derived mathematically from one or more of the following directly less. Aging may exceed the specification for prolonged temperatures measured parameters: f , IL, 3 dB bandwidth, f versus T , and C . above +65C. Typically, aging is greatest the first year after manufacture, C C C O decreasing significantly in subsequent years. 8. Turnover temperature, T , is the temperature of maximum (or turnover) O 2. The center frequency, f , is measured at the minimum insertion loss point, frequency, f . The nominal frequency at any case temperature, T , may be C O C IL , with the resonator in the 50 test system (VSWR 1.2:1). The 2 MIN calculated from: f = f 1 - FTC (T -T ) . Typically, oscillator T is 20C O O C O shunt inductance, L , is tuned for parallel resonance with C at f . TEST O C less than the specified resonator T . O Typically, f or f is less than the resonator f . OSCILLATOR TRANSMITTER C 9. This equivalent RLC model approximates resonator performance near the 3. One or more of the following United States patents apply: 4,454,488 and resonant frequency and is provided for reference only. The capacitance C O 4,616,197 and others pending. is the static (nonmotional) capacitance between pin1 and pin 2 measured 4. Typically, equipment designs utilizing this device require emissions testing at low frequency (10 MHz) with a capacitance meter. The measurement and government approval, which is the responsibility of the equipment includes case parasitic capacitance with a floating case. For usual manufacturer. grounded case applications (with ground connected to either pin 1 or pin 2 5. Unless noted otherwise, case temperature T = +25C2C. C and to the case), add approximately 0.25 pF to C . O 6. The design, manufacturing process, and specifications of this device are 2010-2014 by Murata Electronics N.A., Inc. RO3101 (R) 3/31/14 Page 1 of 2 www.murata.comElectrical Connections Temperature Characteristics This one-port, two-terminal SAW resonator is bidirectional. The terminals The curve shown on the right f = f , T = T C O C O are interchangeable with the exception of circuit board layout. 0 0 accounts for resonator -50 Pin Connection contribution only and does not -50 include oscillator temperature -100 -100 Bottom View 1 Terminal 1 characteristics. -150 -150 Pin 1 2 Terminal 2 Pin 2 -200 -200 3 Case Ground -80-60 -40-20 0 +20 +40 +60 +80 Pin 3 T = T - T ( C ) C O Typical Test Circuit The test circuit inductor, L , is tuned to resonate with the static TEST capacitance, C at F . O C Equivalent LC Model Electrical Test: The following equivalent LC model is valid near resonance: 2 1 2 1 Network Network Analyzer Analyzer 3 C =C +0.25 pF* o p C p *Case Parasitics R L C MM M Power Test: 0.5 pF* 0.5 pF* 1 P 3 INCIDENT Low-Loss 50 Matching Source at P REFLECTED Network F Case Design C to 50 3 2 C G B - CW RF Power Dissipation = P P INCIDENT REFLECTED H Typical Application Circuits F E A Typical Low-Power Transmitter Application: D (3 places) 200k MPS-H10 J Modulation Input +9VDC (2 places) 45 47 C1 L1 1 2 (Antenna) Millimeters Inches C2 Dimensions ROXXXX 3 RF Bypass Bottom View Min Max Min Max 470 A 9.40 0.370 B 3.18 0.125 Typical Local Oscillator Application: C 2.50 3.50 0.098 0.138 D 0.46 Nominal 0.018 Nominal Output +VDC E 5.08 Nominal 0.200 Nominal C1 L1 F 2.54 Nominal 0.100 Nominal +VDC 1 2 G 2.54 Nominal 0.100 Nominal H 1.02 0.040 C2 ROXXXX 3 Bottom View RF Bypass J 1.40 0.055 2010-2014 by Murata Electronics N.A., Inc. www.murata.com RO3101 (R) 3/31/14 Page 2 of 2 (f-f f (ppm) ) o / o