Z-turn Lite 667MHz Xilinx XC7Z007S or XC7Z010 ARM Cortex-A9 Processor with Xilinx 7-series FPGA logic 512MB DDR3 SDRAM (2 x 256MB, 32-bit), 4GB eMMC Flash, 16MB QSPI Flash USB2.0 OTG, 10/100/1000M Ethernet, TF, Debug UART, JTAG One 120 Position Connector Socket for Expansion interface Ready-to-Run Linux Single Board Computer Optional Camera and LCD Modules, IO Extension Cape Figure 1-1 Z-turn Lite The Z-turn Lite is an ultra-cost-effective lite version of MYIRs Z-turn board. It is built around 667MHz Xilinx Zynq-7007S SoC which is among the new Zynq Z-7000S family with a Single-core ARM Cortex-A9 processor and integrated Artix-7 Field Programmable Gate Array (FPGA) logic. The Zynq-7010 Dual-core ARM Cortex-A9 MPCore processor can also be compatible to be used on this board. It is a minimal and compact system of Xilinx Z-7007S or Z-7010 SoC and provides numerous pending configuration of PL resources. It is an excellent reference design and evaluation board for development based on Xilinx Zynq-7000 series SoCs. The Z-turn Lite takes full features of the Zynq Z-7007S or Z-7010 all programmable SoC. It is equipped with 512MB DDR3, 4GB eMMC Flash, 16MB QSPI Flash and a set of peripherals including Micro USB OTG, 10/100/1000Mbps Ethernet, TF, JTAG, Debug UART, etc. Additionally, there is one 120 position connector socket on the rear of the board to bring out as many as IO signals for user extensions. The Z-turn Lite is capable of running Linux operating system and provided with Linux 4.14.0 SDK, the kernel and many drivers are in source code. The Z-turn Lite Kit is delivered with complete accessories including one 1 / 10 micro-USB cable, one Ethernet cable, one 4GB TF card, one USB-to-UART cable, one 5V power adapter and product disk which enables you to start the development quickly when getting the board out-of-the-box. MYIR also offers optional camera and LCD modules as well as an I/O expansion board Z-turn Lite IO Cape for Z-turn Lite which provides many peripheral signals and interfaces including HDMI, GPIO, LCD, Camera and Pmod interfaces. Hardware Specification The Zynq -7000 All Programmable SoC (AP SoC) family integrates the software programmability of an ARM - based processor with the hardware programmability of an FPGA, enabling key analytics and hardware acceleration while integrating CPU, DSP, ASSP, and mixed signal functionality on a single device. Consisting of single-core Zynq-7000S and dual-core Zynq-7000 devices, the Zynq-7000 family is the best price to performance- per-watt, fully scalable SoC platform for your unique application requirements. Zynq-7000S Zynq-7000S devices feature a single-core ARM Cortex-A9 processor mated with 28nm Artix -7 based programmable logic, representing the lowest cost entry point to the scalable Zynq-7000 platform. It includes Zynq Z-7007S, Z-7012S and Z-7014S which target smaller embedded designs. Available with 6.25Gb/s transceivers and outfitted with commonly used hardened peripherals, the Zynq-7000S delivers cost-optimized system integration ideal for industrial IoT applications such as motor control and embedded vision. Figure 1-2 Zynq Z-7000S SoC Device Block Diagram 2 / 10