NT2016SA-40.000MHZ-ENA4203A NDK

Specification of Temperature Compensated Crystal Oscillators 1. NDK Part Number NT2016SA-40M-ENA4203A 2. NDK Specification Number ENA4203A 3. Type NT2016SA Absolute Maximum ratings 4. Ratings Item Notes Min. Max. Units 1 Supply Voltage -0.6 +4.6 V - 2 Control voltage (Vcont) -0.6 to Vcc +0.6, +4.6 max. V - 3 Storage temp. range -40 +125 - Electrical Specification 5. Electrical Spec. Parameters SYM. Notes Min. Typ. Max. Units 1 Nominal frequency fnom 40 MHz - 2 Supply voltage Vcc +3.13 +3.3 +3.47 V (-Earth) 3 Current consumption - - - 1.7 mA - 4 Output voltage - 0.8 - - Vp-p Clipped sine wave (DC-Coupling) 5 Operating temp. rage - -40 - +85 - Load impedance 6 - 9 10 11 k - (resistance part) Load impedance 7 - 9 10 11 pF - (parallel capacitance) DC-cut capacitor of output 8 DC-cut capacitor - - - - - is not put in TCXO.Please add DC-cut capacitor(1,000pF)in output line. 1. Frequency/ -40 to +85(Based on frequency at +25+/- 9 - -2.0 - +2.0 ppm 2) at control voltage (Vcont)=+1.65 V DC temperature characteristics - -0.3 - +0.3 ppm -30 to +85 C - -0.8 - +0.8 ppm -40 to -30 C 2. Frequency/Temperature slope - Minimum of one measurement every 2 C 3. Frequency/Voltage coefficient - -0.1 - +0.1 ppm +3.3V+/-5% 4. Frequency/Load coefficient - -0.1 - +0.1 ppm (10k//10pF)+/-10% at +/-25+/-2, after 2times reflow 5.Frequency tolerance - -2.0 - +2.0 ppm soldering, based on nominal frequency at control voltage (Vcont)=+1.65 V DC 6.Long-term frequency stabillity - -1.0 - +1.0 ppm year - -5.0 - +5.0 ppm 10 years 10 External adjustment - +0.15 +1.65 +3.15 ppm 1.Control voltage (Vcont) 2.Frequency control range - -13.0 - -0.8 ppm Vcont=+0.15 V based on frequency - Vcont=+3.15 V at (Vcont) = +1.65 V DC 3. Typical slope - 7.0 ppm/V 4. Input impedance - 500 k - Positive 5.Frequency change polarity 11 Start-up time - 5.0 ms More than 90% of final output voltage 12 Harmonic distortion - -10 dBc 13 Spurious oscillations - -70 dBc 14 Short-term frequency stability - 1.0 ppb/G =1 s 10 Hz to 1500 Hz 15 G Sensitivity(at +25C) - 0.2 1.5 ppb/G random vibration in each of 3-axis - - -86 dBc/Hz 10 Hz offset - - -110 dBc/Hz 100 Hz offset Phase noise 16 - - -133 dBc/Hz 1 kHz offset (Non-Vibration)(at +25C) - - -147 dBc/Hz 10 kHz offset - - -150 dBc/Hz 100 kHz offset - - -82 dBc/Hz 10 Hz offset Phase noise - - -98 dBc/Hz 100 Hz offset (Vibration)(at +25C) 17 - - -119 dBc/Hz 1 kHz offset (10 Hz to 1500 Hz random vibration - - -144 dBc/Hz 10 kHz offset in each of 3-axis) - - -147 dBc/Hz 100 kHz offset Dimension 6. 2021.11.05X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for TCXO Oscillators category: Click to view products by NDK manufacturer: Other Similar products are found below : SiT5000AI-3D-33E0-10.000000X THD3031035LK280005-10.0M AST3TDATACJ5-10.0000MHz AST3TDATACJ5-20.0000MHz AST3TDA53TACJ2-19.2000MHz AST3TDA53TACJ2-38.8800MHz AST3TDATACJ5-19.2000MHz AST3TDATACJ5-38.8800MHz SiT5155AI-FK-33E0-10.000000F CVT32-10.000 SIT5356AI-FQ-33E0-25.000000X SIT5357AI-FQ-33N0-100.000000X DS32KHZSN+T&R XTCLH25M000THJA0P0 LFTCXO075793Cutt LFTCXO077229Cutt LFPTXO000002Bulk LFTCXO077228Cutt LFTCXO077230Cutt LFTCXO075792Cutt AST3TQ53-T-10.000MHz-5-C ATX-11-F-26.000MHz-F05-T ATX-11-F-27.000MHz-F05-T ATX-12-F-32.000MHz- F05-T ATX-13-F-26.000MHz-F05-T I538-2O7- 25.000 MHz I537-2O7- 39.000 MHz I537-2O7- 25.000 MHz ECS-TXO-2016-33-320-TR ECS-TXO-2016-33-120-TR ECS-TXO-2016-33-250-TR ECS-TXO-2016-33-200-TR ECS-TXO-20CSMV-AC-260-AY-TR TG2016SMN 26.0000M-MCGNNM0 TG2016SMN 25.0000M-MCGNNM0 TG2016SMN 25.0000M-MCGNNM3 TG2520SMN 16.0000M-MCGNNM0 TG2520SMN 25.0000M-MCGNNM0 TG2520SMN 40.0000M-ECGNNM0 TG2520SMN 24.0000M-ECGNNM0 TG2520SMN 20.0000M- MCGNNM0 TG2520SMN 30.0000M-ECGNNM0 TG2520SMN 30.000M-MCGNNM0 TG2520SMN 27.0000M-MCGNNM3 TG2520SMN 32.0000M-MCGNNM3 TG2520SMN 32.0000M-ECGNNM3 LFPTXO000001Bulk LFTCXO063711BULK LFTCXO063713BULK LFTCXO063715BULK