URD30E474MT Netech

MULTILAYER CERAMIC CAPACITORS EPOXY COATED RADIAL TYPE Application Construction NPOTemperature compensation type, have little or no change in capacitance with variation in temperature. Hence, they are used in radio-frequency oscillators, precision timing circuits, ultra stable amplifiers, etc. X7RTemperature stable type for by-pass and decoupling in radio and television receivers, computers servo systems. Audio tone, and coupling, etc., where moderate capacitance variations are permissible and dissipation factor is not critical. Z5U/Y5VGeneral type for by-pass and filtering applications. Part Number Designation: R15 Z 104 M 1H L 5 L Package-Lead-length SIZE T.C Capacitance-Code Tolerance Voltage Lead shape Lead space R15 N=NPO Two significant digits G= 2 1C=16V 1E=25V L=Straight 2=2.54 0.8 R=Tape/Reel R20 W=X7R NO. of zeros. 1H=50V 1J=63V Y=Inside B=Tape/Box J= 5 5=5.08 0.8 R25 Z=Z5U 2A=100V 2E=250V Crimp 6=61mm Example K= 10 (mm) Y=Y5V 2H=500V 3A=1KV H=High 102=1000pf L=25.4mm(min) M= 20 3D=2KV 3F=3KV seated 223=22000pf Z=+80/-20 104=100000pf 1. LEAD SHAPE R15 R20 R25 L Y L R15 R20 H H 12 MULTILAYER CERAMIC CAPACITORS EPOXY COATED RADIAL TYPE 2. LEAD SPACE (F) 3. LEAD LENGTH (L) CODE LEAD SPACE (mm/inch) CODE LEAD LENGTH REMARK 2.54 0.8 0.1 0.032 6mm1mm Specified lead length 2 6 5.08 0.8 0.2 0.032 25.4mm (min) upon request. 5 L 4. BODY SIZE & DIMENSION Capacitance Range Dimensions (mm) Size Lead style code available NPO X7R Z5U Y5V H max W max T max. d 0.05 F 0.08 P 50V: 50V: 50V: L 3.8 3.8 2.5 0.5 2.54 --- 0.47-4700pF 220pF-0.1uF 0.01-0.33uF 50V: R15 0.01uF-0.22uF 100V: 100V: 25V: 3.8 3.8 2.5 0.5 5.08 2.0 H 0.47-2700pF 220pF-0.1uF 0.47-1.0uF 25V: 25V: 16V: 0.12-0.47uF 1.0-2.2uF 10-22uF 5.0 6.0 3.0 0.5 2.54 2.0 Y 50V: 50V: 50V: 25V: R20 5600pF-0.01uF 0.1-1.0uF 2.2-4.7uF 0.22uF-1.0uF 100V: 100V: 50V: 5.0 6.0 3.0 0.5 5.08 2.0 H 2700-6800pF 0.1-0.15uF 0.47-2.2uF 16V: 47uF 25V: 0.1uF 100V: 100V: R25 L 25V: 22uF 6.5 6.5 4.0 0.5 5.08 --- 0.18-0.47uF 0.47uF-1.5uF 50V & 100V 0.012-0.022uF 50V: 10uF Typical Performance Characteristics Specifications Temperature coefficient Dielectric strength 25 (Flash Test) NPO and X7R: 300% rated voltage for 5 seconds with 50 mA. max NPO: 30PPM/, -55 to +125 charging current. X7R: 15%, -55 to +125 Z5U and Y5V: 250% rated voltage for 5 seconds with 50 mA. max Z5U: +22%,-56%, +10 to +85 charging current Y5V: +22%, -82%, -30 to +85 Capacitance test 25 LifeTest : (1000 hrs at max temp. applied with Flash test voltage Recovery: 6-24 hrs for NPO and 24 2 hrs for X7R & Z5U ) NPO: 1 VRMS max at 1 KHz (1 MHz for 100pF or less) NPO: 3% at 200% rated voltage, 125 X7R: 1 VRMS max at 1 KHz X7R: 3% at 200% rated voltage, 125 Z5U: 1 VRMS max at 1 KHz Z5U: 3% at 200% rated voltage, 85 Y5V: 1 VRMS max at 1 KHz Y5V: 3% at 200% rated voltage, 85 Dissipation Factor 25 Insulation Resistance after 60 sec., charging at rated NPO: 0.15% max at 1KHz, 1VRMS max (1 MHz for 1000pF or less) voltage, 25 , 55% R.H. max Z5U: 5% max (at 1KHz, 1VRMS max) NPO: 100G or 1000M-uF whichever is less X7R: (at 1KHz, 1VRMS max) Y5V: (at 1KHz, 1VRMS max) X7R : 10G or 100M-uF whichever is less Max Rated voltage Max Rated voltage Z5U : 10G or 100M-uF whichever is less 2.5% 50V 5% 50V Y5V : 10G or 1000M-uF whichever is less 3.5% 25V & 16V 7% 25V & 16V 5.0% 10V & 6.3V 10% 10V & 6.3V 13