NA 2 - I O - D PRO The NA2-IO-DPRO is a 2IN, 2OUT breakout box designed to connect legacy audio equipment with the Dante network. It features high-quality microphone preamps and 2 Dante ports for either redundant setup or daisy chaining. Audio parameters are adjusted either by Neutrik s DPRO controller or a number of common control software. All connectors are lockable and, together with the removable rubber protection, offer a reliable solution for tough stage conditions. With optional mounting brackets or a rack panel, the box can be mounted below tables, in oor boxes, racks or on a truss. Features & Benets Lockable audio and network connections Connect up to two analog line or mic signals to a Dante network Connect AES/EBU signals to a Dante network and Feed non Dante ready ampliers, speakers or mixing provide an AES/EBU signal from the Dante network desks with signals from the Dante network Primary and Secondary Dante ports Setting of all audio parameters via the DPRO controller software. Yamaha CL/QL mixer, QSYS plug in and Crestron module Different mounting options (rack, truss, oorbox, table Requires a Power over Ethernet switch or a PoE mounting) injector (802.3 af/at/bt) For Dante related questions, refer to the Audinate website: www.audinate.com. The Audinate website features a wealth of manuals, teaching material, FAQs and videos. Please see the Technical Specications in the NA2-IO-DPRO brochure. Audinate is a registered trademark of Audinate Pty Ltd. Dante is a trademark of Audinate Pty Ltd. NA2-IO-DPRO All rights reserved / 08.01.2022 1/4Overview Front NA2-IO-DPRO All rights reserved / 08.01.2022 2/4