NE8MX6 Neutrik

NE8MX6 etherCON CAT6 cable connector self-termination, for insulation A diameter > 1.1 mm, nickel plating The set NE8MX6 consists of a cable plug carrier offering a robust metal shell, proven Neutrik chuck-type strain relief and a CAT6 A compliant RJ45 plug. The set is suitable for a cable diameter range of 7 mm to 9.5 mm and wire gauge of AWG24/1 - AWG22/1 (solid) or AWG24/7 - AWG22/7 (stranded). Attention Does not intermate with the CAT6 chassis connectors NE8FDY-C6 and NE8FDY-C6-B. If the insulation diameter is 1.1 mm please refer to NE8MX6-T. Features & Benets Ruggedized connector with CAT6A component PoE++ compliant according to 802.3bt Type4 compliance according to ISO/IEC 11801 and TIA/EIA 568-C.2 IP65 protected when mated with NE8FDX-P6-W or Rugged latch lock system million fold proven NE8FDX-Y6-W Intermateable with the existing etherCON CAT5 range Unique Neutrik chuck-type strain relief NE8MX6 All rights reserved / 13.01.2022 1/3Technical Information Product Title NE8MX6 Gender male Electrical Dielectric strength 1 kVdc Insulation resistance > 0.5 G Rated current per contact 1.5 A Transmission performance CAT6A, acc. TIA/EIA rating CAT6A, acc. IEC/ISO/EN rating Power over Ethernet PoE++ acc. IEEE 802.3bt Mechanical Cable O.D. 7.0 - 9.5 mm Lifetime > 1000 mating cycles Wiresize AWG 24/1 to AWG 22/1 (wire) AWG 24/7 to AWG 22/7 (strands) Locking device Latch lock Insulation diameter > 1.10 - 1.60 mm Material Bushing PA / PU Contact plating Au Shell Zinc diecast (ZnAl4Cu1) Shell plating Nickel Strain relief POM Environmental Protection class IP 65 (in combination with NE8FDX-*6-W) Temperature range -40 C to +70 C NE8MX6 All rights reserved / 13.01.2022 2/3