ChipWhisperer Embedded Security Analysis Tools Stand-Alone Targets NewAE Technology CW308 UFO Target Board NewAE Technology Inc. Product Datasheet newae.com Get probing The ChipWhisperer CW308 UFO board is the ultimate starting point for side-channel power analysis attacks when combined with a ChipWhisper- er Capture solution. The CW308 puts all the standard requirements onto one board (such as power supplies, oscillators, filters) allowing you to make super-simple target victim boards. A large variety of available target examples provides all levels of architectures for you to test against includ- ing 8-bit microcontrollers, 32-bit microcontrollers, and FPGAs. Product Highlights 1.2V, 1.8V, 2.5V, 3.3V, and V-ADJ (1.25V - 3.5V range) power supplies. Oscillator driver with crystal socket to allow use of most 2 or 3-pin crystals to drive target device or ChipWhisperer. On-board LC low-pass filter to provide clean power supply for resistive shunt measurement. Diode protection on I/O lines to allow voltage glitch insertion on target with less risk to connected devices. Soft-start on input power to avoid disconnecting ChipWhisperer-Lite USB when switching power on/o.ff Includes 8-bit Atmel XMEGA and 32-bit STM32F3 (Cortex M3) target devices. Ordering Summary NAE-CW308 Includes base-board, two targets, and additional accessories (see detailed ordering description). NAE-CW308-ACCKIT Includes 5.0V power supply & SMA-BNC cable. Connects board to regular oscilloscope (not used with ChipWhisperer-Capture). Product Links Full Documentation NewAE Technology Inc. Your friendly embedded security arsonist. newae.com Detailed Ordering Options NAE-CW308 e CW308 coTh mes with the following parts (shown above) CW308 Main Board CW308T-XMEGA Target Board (Atmel 8-bit microcontroller) CW308T-STM32F3 Target Board (ARM Cortex M3) CW308T Prototyping Boards (2.54mm prototyping board) NPCB-CW308T-STM32F Blank PCB (Fits STM32F0, F1, F2, F3, F4) Target Removal Tool 7.37 MHz crystal 8x jumper wires 30 cm SMA cable SMA Tee NAE-CW308-ACCKIT e accesTh sory kit includes the additional required parts for powering the board stand-alone. The kit consists of the following items: 24 inch SMA to BNC Cable, Johnson P/N 415-0028-024 5.0 VDC Power Supply, XP Power P/N VER12US050-JA CW308 Datasheet 2 Last Update: 2018-FEB-07