NAE-HPROBE-15 NewAE

ChipWhisperer Embedded Security Analysis Tools Probes NewAE Technology H-Field Probe, 15mm NewAE Technology Inc. Product Datasheet newae.com e NTh AE-HPROBE-15 is a simple Planar H-Field probe. It is constructed from a 4-layer PCB for low- cost construction yet reliable and repeatable measure- ments. It includes several mounting holes that can be used to fasten it to an XY table or similar to sweep over a device surface. e H-FieTh ld probe is suggested to be used with a low noise amplifier (LNA), especially if not connected to a high-sensitivity device such as the ChipWhisperer or a spectrum analyzer. e pTh robe comes with a SMA cable and a SMA cou- pler. A SMA to BNC or SMA to N adapter may be needed for your equipment. Product Highlights Super-simple design means a low-cost H-Field probe (finally). SMA connector avoids needing to remember where you put that weird special cable. Can mount a NewAE Technology Inc. LNA directly onto the probe to mini- mize noise introduced in cable. Can be used for injecting EM faults in addition to measurement applications. See documentation link for video example of power measurement using H- Field probe. Ordering Summary NAE-HPROBE-15 H-Field Probe, 15mm diameter Product Links Full Documentation NewAE Technology Inc. Your friendly embedded security arsonist. newae.com LNA Usage Note the Low Noise Amplifier (LNA) shown at left is NOT included. But this shows how the LNA can be mounted directly onto the probe using the included SMA coupler. Probe Construction Overview e aTh bove shows all four layers of the PCB used in the planar H-Field probe. The specific layers are shown on the following page. <This area left awkwardly empty on purpose> NAE-HPROBE-15 2 Last Update: 2018-FEB-13