High Temperature Inconel Overbraided Ceramic Fiber Insulated Thermocouples High Temperature Inconel Overbraided Ceramic Fiber Insulated Thermocouples XCIB SERIES High Temperature Ceramic Insulation with Inconel Overbraid Flexible, Abrasion Resistant Withstand Temperatures up to 1090C (2000F) Unexcelled Oven and Furnace Profiling Five Convenient Styles for Easy Application J, K, E or N Thermocouple Calibrations Unique NEWPORT family of high temperature types J, K, E or N thermocouples are double-protected with abrasion-resistant Inconel overbraid with high temperature ceramic fiber insulation. A temperature rating of 980C (1800F)continuous service and 1090C (2000F) short-term service makes these products ideal for many high temperature measurement applications. They are unexcelled for profiling ovens and furnaces. The 20-gage solid conductor thermocouple wires are insulated with braided Nextel ceramic Over the ceramic fiber is a rugged overbraid of Inconel 600 a tough, high-temperature, high nickel content alloy. Five convenient styles are available in 3 ft. and 10 ft. lengths for high temperature measurement applications. Specifications Wire Gage: 20 gage solidstandard limits of error Insulation: Nextel ceramic fiber Overbraiding & Fittings: Inconel 600 Temperature: 980C (1800F) continuous,1090C ( 2000F) short-term service, depending on thermocouple type. Termination: Ceramic beaded leads with compensated spade lugs, OSTW 220C (425F) male connector, or NHXH high temperature 650C (1200F) ceramic male connector Probe Style A grounded junction thermocouple with the Inconel overbraid welded to form a smooth rounded tip for all general purpose applications. Style 1 A general purpose, bead welded, exposed junction thermocouple. Style 2High Temperature Inconel Overbraided Ceramic Fiber Insulated Thermocouples An exposed junction, bead welded junction thermocouple with an Inconel collar to clamp the probe to a surface, or to secure it into a hole or any fabrication. Style 3 Grounded junction. It can be bolted to a surface, or the Inconel eye can hook the thermocouple to a conveyor flight. Ungrounded junction versions are available. Style 4 Contact sales for more information. Has an Inconel air hood to protect the beaded wire exposed junction. This design can be clamped to a surface, hooked to a conveyor flight, or bolted to a surface by Style 5 using the through hole at the open end of the hood. Model Number Probe Style Termination Type XCIB-(*)-1-1-(**) 1 XCIB-(*)-1-2-(**) 2 1 XCIB-(*)-1-3-(**) 3 XCIB-(*)-1-4-(**) 4 XCIB-(*)-2-1-(**) 1 XCIB-(*)-2-2-(**) 2 2 XCIB-(*)-2-3-(**) 3 XCIB-(*)-2-4-(**) 4 XCIB-(*)-3-1-(**) 1 XCIB-(*)-3-2-(**) 2 3 XCIB-(*)-3-3-(**) 3 XCIB-(*)-3-4-(**) 4 XCIB-(*)-4-1-(**) 1 XCIB-(*)-4-2-(**) 2 4 XCIB-(*)-4-3-(**) 3 XCIB-(*)-4-4-(**) 4 XCIB-(*)-5-1-(**) 1 XCIB-(*)-5-2-(**) 2 5 XCIB-(*)-5-3-(**) 3 XCIB-(*)-5-4-(**) 4 * Specify Thermocouple Type: J: Iron-Constantan, K: CHROMEGA-ALOMEGA, E: CHROMEGA- Constantan, N: OMEGALLOY-NICROSIL-NISIL Use prefix of CAL- for assemblies to be supplied with calibration data at specified temperatures. Check Sales Dept. for pricing ** Specify length in feet. 3 or 10 standard Note: Available with Silica insulation. Change XCIB in model number to XSIB. No additional charge.