NPIC6C4894D-Q100Y Nexperia

NPIC6C4894-Q100 Power logic 12-bit shift register open-drain outputs Rev. 1 17 April 2014 Product data sheet 1. General description The NPIC6C4894-Q100 is a 12-stage serial shift register. It has a storage latch associated with each stage for strobing data from the serial input (D) to the parallel open-drain outputs (QP0 to QP11). Data is shifted on positive-going clock (CP) transitions. The data in each shift register stage is transferred to the storage register when the latch enable (LE) input is HIGH. Data in the storage register drives the gate of the output extended-drain NMOS transistor whenever the output enable input (OE) is HIGH. A LOW on OE causes the outputs to assume a high-impedance OFF-state. Operation of the OE input does not affect the state of the registers. Two serial outputs (QS1 and QS2) are available for cascading a number of NIC6C4894-Q100 devices. Serial data is available at QS1 on positive-going clock edges to allow high-speed operation in cascaded systems with a fast clock rise time. The same serial data is available at QS2 on the next negative going clock edge. It is used for cascading NPIC6C4894-Q100 devices when the clock has a slow rise time. The open-drain outputs are 33 V/100 mA continuous current extended-drain NMOS transistors designed for use in systems that require moderate load power such as LEDs. Integrated voltage clamps in the outputs, provide protection against inductive transients. This protection makes the device suitable for power driver applications such as relays, solenoids and other low-current or medium-voltage loads. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications. 2. Features and benefits Automotive product qualification in accordance with AEC-Q100 (Grade 1) Specified from 40 C to +125 C Low R DSon 12 Power EDNMOS transistor outputs of 100 mA continuous current 250 mA current limit capability Output clamping voltage 33 V 30 mJ avalanche energy capability Low power consumption Latch-up performance exceeds 100 mA per JESD 78 Class II level A ESD protection: HBM AEC-Q100-002 revision D class H2 exceeds 2500 V CDM AEC-Q100-011 revision C1 class C6 exceeds 1000 VNPIC6C4894-Q100 Nexperia Power logic 12-bit shift register open-drain outputs 3. Applications LED sign Graphic status panel Fault status indicator 4. Ordering information Table 1. Ordering information Type number Package Temperature range Name Description Version NPIC6C4894D-Q100 40 C to +125 C SO20 plastic small outline package 20 leads SOT163-1 body width 7.5 mm NPIC6C4894PW-Q100 40 C to +125 C TSSOP20 plastic thin shrink small outline package 20 leads SOT360-1 body width 4.4 mm 5. Functional diagram ( / 43 43 DDD Fig 1. Logic symbol NPIC6C4894 Q100 All information provided in this document is subject to legal disclaimers. Nexperia B.V. 2017. All rights reserved Product data sheet Rev. 1 17 April 2014 2 of 21 2( 43 43 43 43 43 43 43 43 43 43 46 46 &3