PESD1LVDS,115 Nexperia

PESD1LVDS ESD protection for in-vehicle ultra high-speed interfaces Rev. 3 5 July 2016 Product data sheet 1. Product profile 1.1 General description The device is designed to protect in-vehicle ultra high-speed interfaces in automotive applications, such as Low-Voltage Differential Signaling (LVDS), High-Definition Multimedia Interface (HDMI) and DisplayPort interfaces against ElectroStatic Discharge (ESD). The device is housed in an ultra small SOT1165-1 (XSON10) Surface-Mounted Design (SMD) plastic package. 1.2 Features and benefits System ESD protection for LVDS, HDMI and DisplayPort interfaces Line capacitance of only 0.6 pF with 0.05 pF matching capacitance between signal pairs Ultra small XSON10 package with design-friendly pass-thru signal routing AEC-Q101 qualified 1.3 Applications The devices are designed for high-speed receiver and transmitter port protection: Automotive A/V monitors, displays and cameras 1.4 Quick reference data Table 1. Quick reference data Symbol Parameter Conditions Min Typ Max Unit V reverse standoff voltage - - 5.5 V RWM 1 C channel capacitance f = 1 MHz -0.6 -pF ch V =2.5 V bias 1 This parameter is guaranteed by design.PESD1LVDS Nexperia ESD protection for in-vehicle ultra high-speed interfaces 2. Pinning information Table 2. Pinning Pin Symbol Description Simplified outline Graphic symbol 1CH1 negative channel 1 24 10968 7 1 5 ESD protection 2 CH1+ positive channel 1 152 3 4 ESD protection Transparent top view 3 GND ground XSON10 4CH2 negative channel 2 ESD protection 3, 8 001aai619 5 CH2+ positive channel 2 ESD protection 6 n.c. not connected 7 n.c. not connected 8 GND ground 9 n.c. not connected 10 n.c. not connected 3. Ordering information Table 3. Ordering information Type number Package Name Description Version PESD1LVDS XSON10 plastic extremely thin small outline package no leads SOT1165-1 10 terminals body 1 2.5 0.5 mm 4. Limiting values Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter Conditions Min Max Unit T storage temperature 55 +125 C stg T ambient temperature 40 +125 C amb Table 5. ESD maximum ratings T =25 C unless otherwise specified. amb Symbol Parameter Conditions Min Max Unit 1 2 V electrostatic IEC 61000-4-2 - 8kV ESD discharge voltage (contact discharge) 1 Device stressed with ten non-repetitive ESD pulses. 2 All pins to ground. PESD1LVDS All information provided in this document is subject to legal disclaimers. Nexperia B.V. 2017. All rights reserved Product data sheet Rev. 3 5 July 2016 2 of 12