NCD102K1KVY5PTRF NIC

Ceramic Disc Capacitors NCD Series Class II/III GENERAL PURPOSE, HI-K (DIELECTRIC CONSTANT Class II/III) TYPE FEATURES WIDE SELECTION OF TEMPERATURE CHARACTERISTICS HIGH INSULATION RESISTANCE EXCELLENT HIGH FREQUENCY CHARACTERISTICS ECONOMICALLY PRICED AVAILABLE WITH FORMED LEADS AND ON TAPE FOR AUTOMATIC ..INSERTION SPECIFICATIONS Temperature Y5F Y5P Z5U Z5V Characteristics Operating -30C ~ +85C -30C ~ +85C +10C ~ +85C +10C ~ +85C Temperature Range Capacitance Range 100pF ~ 0.01F 100pF ~ 0.022F 0.001F ~ 0.01F 0.001F ~ 0.1F Standard Tolerance 10% (K) 10% (K) 20% (M) +80%/-20% (Z) Capacitance Change Over 7.5% 10% -55% ~ +22 -82% ~ +22% Temperature Range Dissipation Factor 2.5%* 2.5%* 5% 5% Insulation Resistance Minimum 10,000 Megohms Working Voltage Range 50Vdc ~ 1KVdc Dielectric Withstanding 2.5 Times Rated Voltage For Not Less Than 1 Second, 50mA Maximum Voltage (Test Voltage) Cap. Change 10% 10% 20% 30% Load Life Test 85C D.F. (max.) 4% 4% 7.5% 7.5% 1,000 Hours I.R. (min.) 1,000 Megohms Test Conditions 1KHz, 1.0V 02Vrms 1KHz, 0.5V 0.1Vrms * Special low dissipation factor (1.0% max.) Y5F and Y5P dielectrics are also available. Contact NIC for availability. NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 1 Speci cations are subject to changeCeramic Disc Capacitors NCD Series Class II/III 103 M 50 Z5U J TR .25LS F NCD .1LS RoHS compliant .25LS = .25 Taped LS Option Optional Packaging TR = Taped and Reel TB = Tape and Box (Ammo) Lead Spacing (mm) - S Optional Cut Lead Space (LS) and/or Body Standard Standard Optional Bulk Optional T&R Diameter Bulk T&R mm (inches) mm (inches) Lead Length (LL) in inches 5 ~ 11 6.35 0.8 5.0 0.8 5.0 0.8 (0.2LS) 2.5 0.8 (0.1LS) Optional Lead Style 7.5 0.8 (0.295LS) 7.5 0.8 (0.295LS) C = Cut Lead >12 6.35 0.8 5.0 0.8 10.0 0.8 (0.395LS) 10.0 0.8 (0.395LS) D = Inside Kink (Short Leads) E = Outward Kink (Short Leads) LEAD DIAMETER J = Inside Kink (Long Leads) BODY THICKNESS 0.6MM IS STANDARD K = Outward Kink (Long Leads) 2 ~ 4MM DEPENDENT ON CV Temperature Coef cient Working Voltage DC Tolerance Code Standard Low Voltage C = 0.25pF K = 10% 100Vdc & Below 500Vdc & Up D = 0.5pF M = 20% J = 5% Z = + 80% / - 20% Capacitance code, expressed in pfd, First two digits are signi cant, third digit is no. of zeros. R indicates decimal for under 10pfd. 2 max. Series 3 max. 23 min. 23 min. STANDARD PRODUCTS AND MAXIMUM DIAMETER (mm) BY T.C. AND VOLTAGE S S Y5F/Y5P* Z5U Z5V Cap. Working Voltage (Vdc) (pF/F) 50 50 50 500 1K 500 1K 500 1K 100 100 100 J Style K Style 100~470pF 6 6 6 ------ 560 6 6 6 ------ 680 6 6 7 ------ 750 6 6 7 ------ 820 6 6 7 ------ 5 max. 5 max. 0.001F 677666 - 66 0.0015 6 8 8 6 6 7 - 6 6 1.5+0.2 1.5+0.2 0.0022 6 9 10 6 7 7 6 6 6 23 min. 23 min. 0.0027 7 10 12 6 7 8 6 6 7 0.0033 7 10 14 6 7 9 6 7 8 0.0047 8 12 14 6 8 10 6 8 8 S S 0.0056 9 14 16 6 9 10 6 8 9 (BULK AND TAPED STYLES) 0.0068 9 14 16 7 9 12 6 8 10 0.0082 10 16 18 7 10 12 6 9 10 D Style E Style 0.01 12 16 20 7 10 12 6 9 10 0.015 14 21 - 9 14 16 7 10 12 0.022 - - - 10 16 18 8 14 16 0.033 - - - 8 18 22 7 16 18 0.047 - - - 8 21 24 7 16 21 0.068 - - - 8/9 24 - 8 16 - 5 max. 5 max. 0.1 - - - 8/9 26 - 8/9 17 - 1.5+0.2 1.5+0.2 *.0047 F AND ABOVE NOT AVAILABLE IN Y5F, PLEASE USE Y5P. 4.7 + 1 4.7 + 1 NIC RESERVES THE RIGHT TO REQUEST MINIMUM QUANTITIES ON S CERTAIN VALUES. S (BULK ONLY) NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 2 Speci cations are subject to change