NCD221K1KVY5PJTRF NIC

Ceramic Disc Capacitors NCD Series Class II/III GENERAL PURPOSE, HI-K (DIELECTRIC CONSTANT Class II/III) TYPE FEATURES WIDE SELECTION OF TEMPERATURE CHARACTERISTICS HIGH INSULATION RESISTANCE *See Part Number System for Details EXCELLENT HIGH FREQUENCY CHARACTERISTICS ECONOMICALLY PRICED AVAILABLE WITH FORMED LEADS AND ON TAPE FOR AUTOMATIC ..INSERTION SPECIFICATIONS Temperature Y5F Y5P Z5U Z5V Characteristics Operating -30C ~ +85C -30C ~ +85C +10C ~ +85C +10C ~ +85C Temperature Range Capacitance Range 100pF ~ 0.01 F 100pF ~ 0.022 F 0.001 F ~ 0.01F 0.001 F ~ 0.1F Standard Tolerance 10% (K) 10% (K) 20% (M) +80%/-20% (Z) Capacitance Change Over 7.5% 10% -55% ~ +22 -82% ~ +22% Temperature Range Dissipation Factor 2.5%* 2.5%* 5% 5% Insulation Resistance Minimum 10,000 Megohms Working Voltage Range 50Vdc ~ 1KVdc Dielectric Withstanding 2.5 Times Rated Voltage For Not Less Than 1 Second, 50mA Maximum Voltage (Test Voltage) Cap. Change 10% 10% 20% 30% Load Life Test 85C D.F. (max.) 4% 4% 7.5% 7.5% 1,000 Hours I.R. (min.) 1,000 Megohms Test Conditions 1KHz, 1.0V 02Vrms 1KHz, 0.5V 0.1Vrms * Special low dissipation factor (1.0% max.) Y5F and Y5P dielectrics are also available. Contact NIC for availability. NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 1 Speci cations are subject to changeCeramic Disc Capacitors NCD Series Class II/III 103 M 50 Z5U J TR F NCD .100LS RoHS compliant Optional Packaging TR = Taped and Reel TB = Tape and Box (Ammo) Lead Spacing (mm) - S Optional Lead Space (LS) and/or Body Standard Standard Optional Bulk Optional T&R Diameter Bulk T&R mm (inches) mm (inches) Lead Length (LL) in inches 5 ~ 11 6.35 0.8 5.0 0.8 5.0 0.8 (0.200LS) 2.5 0.8 (0.100LS) Optional Lead Style 7.5 0.8 (0.295LS) 7.5 0.8 (0.295LS) C = Cut Lead >12 6.35 0.8 5.0 0.8 10.0 0.8 (0.395LS) 10.0 0.8 (0.395LS) D = Inside Kink (Short Leads) E = Outward Kink (Short Leads) LEAD DIAMETER J = Inside Kink (Long Leads) BODY THICKNESS 0.6MM IS STANDARD K = Outward Kink (Long Leads) 2 ~ 4MM DEPENDENT ON CV Temperature Coef cient Working Voltage DC Tolerance Code Standard Low Voltage C = 0.25pF K = 10% 100Vdc & Below 500Vdc & Up D = 0.5pF M = 20% J = 5% Z = + 80% / - 20% Capacitance code, expressed in pfd, First two digits are signi cant, third digit is no. of zeros. R indicates decimal for under 10pfd. 2 max. Series 3 max. 23 min. 23 min. STANDARD PRODUCTS AND MAXIMUM DIAMETER (mm) BY T.C. AND VOLTAGE S S Y5F/Y5P* Z5U Z5V Cap. Working Voltage (Vdc) (pF/F) 50 50 50 500 1K 500 1K 500 1K 100 100 100 J Style K Style 100~470pF 6 6 6 ------ 560 6 6 6 ------ 680 6 6 7 ------ 750 6 6 7 ------ 820 6 6 7 ------ 5 max. 5 max. 0.001 F 6 77666 - 6 6 0.0015 6 8 8 6 6 7 - 6 6 1.5+0.2 1.5+0.2 0.0022 6 9 10 6 7 7 6 6 6 23 min. 23 min. 0.0027 7 10 12 6 7 8 6 6 7 0.0033 7 10 14 6 7 9 6 7 8 0.0047 8 12 14 6 8 10 6 8 8 S S 0.0056 9 14 16 6 9 10 6 8 9 (BULK AND TAPED STYLES) 0.0068 9 14 16 7 9 12 6 8 10 0.0082 10 16 18 7 10 12 6 9 10 D Style E Style 0.01 12 16 20 7 10 12 6 9 10 0.015 14 21 - 9 14 16 7 10 12 0.022 - - - 10 16 18 8 14 16 0.033 - - - 8 18 22 7 16 18 0.047 - - - 8 21 24 7 16 21 0.068 - - - 8/9 24 - 8 16 - 5 max. 5 max. 0.1 - - - 8/9 26 - 8/9 17 - 1.5+0.2 1.5+0.2 *.0047 F AND ABOVE NOT AVAILABLE IN Y5F, PLEASE USE Y5P. 4.7 + 1 4.7 + 1 NIC RESERVES THE RIGHT TO REQUEST MINIMUM QUANTITIES ON S CERTAIN VALUES. S (BULK ONLY) NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 2 Speci cations are subject to change