Multilayer Ceramic Chip Capacitors NMC Series NPO FEATURES CLASS I DIELECTRIC, TEMPERATURE COMPENSATING Expanded HIGH STABILITY OVER TIME, VOLTAGE AND TEMPERATURE CHANGES 01005 LOW DIELECTRIC LOSS NICKEL BARRIER TERMINATIONS AND EXCELLENT Case Size MECHANICAL STRENGTH SPECIFICATIONS NPO Capacitance Range 0.47pF to 0.068 F Capacitance Tolerance Below 10pF: 0.1pF(B), 0.25pF(C), 0.5pF(D) 10pF and above: 1%(F), 2%(G), 5% (J) Operating Temperature Range -55C ~ +125C Temperature Characteristics 0 30ppm/C Rated Voltages 25Vdc, 35Vdc, 50Vdc (see NMC-H Series for higher voltages) Dissipation Factor For values >30pF 0.1% 25C For values < 30pF Q=400+20 x C (C in pF) insulation Resistance 10,000Megohms min. or 500Megohm/ F (min.), whichever is less +25C Dielectric Withstanding Voltage 250% of Rated Voltage for 5 1 seconds, 50mA maximum current Test Conditions (EIA-198-2E) <1000pF 1MHz, 1.2Vrms max. or >1000pF 1KHz, 1.2Vrms max. Voltage Coef cient of Minimum Insulation Resistance Capacitance - NPO vs Temperature Typical NPO Temperature Coef cient 10,000 0.2 0.4 0.3 0.2 0.1 1000 0.1 0.0 0.0 -0.1 100 -0.2 -0.1 -0.3 -0.4 -0.2 10 -55 -25 0 25 50 75 100 125 0 10 20 30 40 50 60 70 80 90 100 10 25 100 150 Temperature (Degrees Celsius) DC Volts Applied Temperature (Degrees C) Aging Rate - NPO Impedance vs. Frequency NPO 0.2 1000 100 0.1 1000pF 100pF 10 0.0 1 -0.1 0.1 -0.2 0.01 1 10 100 1000 10000 1 10 100 1000 Hours Frequency (MHz) PART NUMBER SYSTEM NMC 0805 NPO 101 J 50 TRP or TRPLP 3K 7C3 F RoHS Compliant RoHS 7C-III Exemption Free* Optional Reel Qty (3K=3,000pcs) Tape & Reel (Embossed Plastic Carrier) Tape & Reel (Punched carrier) Voltage (Vdc) Capacitance Tolerance Code (see chart) Capacitance Code, expressed in pF, rst 2 digits are signi cant, 3rd digit is no. of zeros, R indicates decimal for under 10pF Temperature Characteristic Size Code (see chart) Series * - Part Number Level Identi cation of NPO MLCCs that do not take RoHS exemption 7C-III NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 1 Speci cations are subject to changeMultilayer Ceramic Chip Capacitors NMC Series NPO EIA Case Size 01005 EIA Case Size 0201 0402 0603 0805 Length (L) 0.40.02 Length (L) 0.60.03 1.00.05 1.60.15 2.00.2 Width (W) 0.20.02 Width (W) 0.30.03 0.50.05 0.80.15 1.250.2 Thickness max. (T) 0.22 Thickness max. (T) 0.33 0.6 1.0 1.35 Termination Width Termination Width 0.10.03 0.150.05 0.20.1 0.12 ~ 0.51 0.25 ~ 0.71 (P) (P) Working Voltage (Vdc) Working Voltage (Vdc) Capacitance Capacitance 16 10 16 25 50 16 25 50 100 16 25 50 100 16 25 50 100 0.5pF 0.47pF ~ 22pF 1.0pF 24pF 1.5pF 27pF 2.0pF 30pF 3.0pF 33pF 4.0pF 36pF 5.0pF 39pF 6.0pF 43pF 7.0pF 47pF 8.0pF 51pF 9.0pF 56pF 10pF 62pF 12pF 68pF 15pF 75pF 18pF 82pF 22pF 91pF 27pF 100pF 33pF 110pF 39pF 120pF 47pF 130pF 56pF 150pF 68pF 160pF 82pF 180pF 100pF 200pF 220pF 240pF 270pF 300pF W 330pF 360pF 390pF T 430pF 470pF P P 510pF L 560pF 620pF 680pF 750pF 100% Sn over Ni barrier 820pF 910pF (CONSULT FACTORY 0.001 F FOR CAPACITANCE 0.0012 F 0.0015 F VALUES NOT LISTED) 0.0018 F 0.0022 F 0.0027 F * * 0.0033 F 0.0039 F ** 0.0047 F * 0.0056 F ** 0.0068 F ** ** 0.0082 F *1.45mm maximum thickness NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 2 Speci cations are subject to change