Multilayer Ceramic Chip Capacitors NMC High CV Series FEATURES RoHS X7R, X5R AND Y5V DIELECTRICS Compliant HIGH CAPACITANCE DENSITY Includes all homogeneous materials ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH *See Part Number System for Details NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* Temperature Coef cient X7R X5R Y5V Capacitance Range 1.0 F ~ 10F 1.0F ~ 100F 1.0F ~ 100F Capacitance Tolerance 10% (K) & 20% (M) 10% (K) & 20% (M) +80%/-20% (Z) Operating Temperature Range -55C ~ +125C -55C ~ +85C -30C ~ +85C Temperature Characteristics 15% Cap. 15% Cap. +22%, -82% Cap. Rated Voltages 4Vdc, 6.3Vdc, 16Vdc, 25Vdc, 50Vdc & 100Vdc Dissipation Factor See Sizes & Values Tables insulation Resistance 100Megohm/ F minimum +25C Dielectric Withstanding Voltage 250% of Rated Voltage for 5 1 sec., 50mA max. 150% of Rated Voltage for 5 1 sec., 50mA max. C < 10 F 1KHz, 1.0V 0.2Vrms (ALC on) Test Conditions (EIA-198-2E) 1KHz, 1.0V 0.1Vrms (ALC on) C > 10 F 120Hz, 0.5V 0.2Vrms (ALC on) *Re ow soldering is recommended. Contact NIC regarding the use of other soldering methods. Capacitance value stability over applied VDC is not assured for class II MLCC (X7R, X5R & Y5V) and it is suggested to consider to use NPO MLCCs Ceramic Capacitors, Film Capacitors or Electrolytic Capacitors for applications where stability in capacitance value, over applied VDC, is performance requirement. For additional information go to: Multilayer Ceramic Chip Capacitors NMC High CV Series X7R HIGH CV CAPACITOR VALUES AND SIZES (mm) EIA Case Size 0603 0805 1206 Length (L) 1.6 0.15 2.0 0.2 3.20.2 Width (W) 0.8 0.15 1.25 0.2 1.60.2 Thickness max. (T) 1.0 1.35 1.90 Termination Width (P) 0.1 ~ 0.65 0.25 ~ 0.75 0.25 ~ 0.85 Working Voltage (Vdc) Capacitance 6.3V 10 16 6.3 10 16 25 6.3 10 16 25 35 50 1.0 F 5% 5% 5% 3.5% 5% 5% 5% 3.5% 3% 1.5 F 2.2 F 10% 10%* 5%* 5%* 5%* 5% 5% 3.5% 3.3 F 10%* 5% 5% 3.5% 10%* 5% 5% 3.5% 4.7 F 10 F 15%* 10% 5% 3.5%** * 1.45mm maximum thickness, **2.20mm maximum thickness Percentages in the table represent the dissipation factor for that value. X7R HIGH CV CAPACITOR VALUES AND SIZES (mm) EIA Case Size 1210 1812 2225 Length (L) 3.20.2 4.50.4 5.70.4 Width (W) 2.50.2 3.20.3 6.350.25 Thickness max. (T) 2.20 1.8 2.20 Termination Width (P) 0.25 ~ 1.00 0.25 ~ 1.5 0.25 ~ 1.02 Working Voltage (Vdc) Capacitance 10 16 25 35 50 100 10 16 25 50 100 25 50 100 1.0 F 5% 3.5% 3.5% 3.5% 2.5%** 5% 3.5% 3.5% 2.5%* 2.5%* 2.5% 2.5% 2.5% 2.5% 1.5 F 2.2 F 3.5% 2.5% 3.3 F 3.5% 4.7 F 3.5% 5% 2.5%** 10 F 5% 3.5% 5%** *2.20mm maximum thickness, **2.80mm maximum thickness Percentages in the table represent the dissipation factor for that value. (CONSULT FACTORY FOR CAPACITANCE VALUES NOT LISTED) W T P P L 100% Sn over Ni barrier NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 2 SPECIFICATIONS ARE SUBJECT TO CHANGE