NMC-P Series Multilayer Ceramic Chip Capacitors FEATURES RoHS CRACK RESISTANT TERMINATION Compliant SOFT TERMINATION, OPEN MODE FAILURE Includes all homogeneous materials WIDE VOLTAGE RANGE (16V TO 3KV) HIGH CAPACITANCE (UP TO 10mF) *See Part Number System for Details RoHS COMPLIANT SAC SOLDER COMPATIBLE** SPECIFICATIONS Temperature Coefficient NPO X7R Capacitance Range 5pF ~ 0.22 F 180pF ~ 10 F For 2.2pF ~ 10pF: 0.1pF (B), 0.25pF (C), 0.5pF (D), 1pF (F) Capacitance Tolerance 10% (K) & 20% (M) Above 10pF: 1% (F), 2% (G), 5% (J), 10% (K) Operating Temperature Range -55C ~ +125C Temperature Characteristics 30ppm/C 15% Cap. Rated Voltages 16Vdc, 25Vdc, 50Vdc, 100Vdc, 200Vdc, 250Vdc, 500Vdc, 630Vdc, 1KVdc, 2Kvdc & 3Kvdc Q = > 1000 (more then 30pF)* 2.5% max. 1KHz, Q or Dissipation Factor Q = > 400 + 20 x C in pF (30pF and below)* 1.0V 0.2Vrms insulation Resistance 10,000Megohm or 500Megohm/ F whichever is less +25C 200% of rated voltage for 5 seconds, 50mA max. (16V ~ 250V) Dielectric Withstanding Voltage 150% of rated voltage for 5 seconds, 50mA max. (500V ~ 630V) 120% of rated voltage for 5 seconds, 50mA max. (1KV ~ 3KV) *Test Frequency & Voltage: Up to 100pF 1MHz/1.0Vrms, Above 100pF 1KHz/1.0Vrms **Reflow soldering allowed for all case sizes. Contact NIC for wave soldering restrictions. PART NUMBER SYSTEM NMC-P 1206 X7R 105 K 50 TRP or TRPLP F RoHS Compliant Tape & Reel (Plastic Carrier) Tape & Reel (Punched Carrier) Voltage (Vdc) Capacitance Tolerance Code (see chart) Capacitance Code, expressed in pF, first 2 digits are significant, 3rd digit is no. of zeros Temperature Characteristic (NPO or X7R) Size Code (see chart) Series CONSTRUCTION Base layer (Cu 50V ~ 250V) (Ag 500V ~ up) Flexible layer (Polymer) Barrier layer (Ni) Finish layer (Sn) OPEN MODE FAILURE AS A RESULT OF BENDING STRESS Termination Separation (Open Failure Mode) NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 1 Specifications are subject to changeMultilayer Ceramic Chip Capacitors NMC-P Series NPO VALUES AND SIZES (mm) EIA Case Size 0603 0805 1206 1210 Length (L) 1.60 0.1 2.00 0.2 3.20 0.3 3.20 0.30 Width (W) 0.80 0.1 1.25 0.25 1.60 0.2 2.50 0.20 Thickness max. (T) 0.90 max. 1.45 max. 1.80 max. 2.60 max. Termination Width (P) 0.15 min. 0.20 min. 0.30 min. 0.30 min. Working Voltage (Vdc) Capacitance 200 16 25 50 200 250 500 16 25 50 200 250 500 1K 2K 3K 25 50 200 250 500 5.0 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 0.001 F 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.01 F 0.012 0.015 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 2 Specifications are subject to change