JJC0E156MELZ Nichicon

10 0.1 10 ELECTRIC DOUBLE LAYER CAPACITORSEVerCAP Snap-in Terminal Type JC series Excellent in voltage holding property. Suitable for quick charge and discharge. + Wide temperature range ( 25 to 60 C C). Compliant to the RoHS directive (2002/95/EC). Specifications Item Performance Characteristics 25 to +60C Category Temperature Range Rated Voltage Range 2.5V 15 to 150F See Note Rated Capacitance Range 20% (20C) Capacitance Tolerance 0.5C (mA) C : Rated Capacitance(F) (After 30 minutes application of rated voltage, 2.5V) Leakage Current Stability at Low Temperature + Capacitance ( 25C) / Capacitance ( 20C) 100 70% ESR, DCR* Refer to the list below (20C). *DC internal resistance Capacitance change Within 30% of the initial capacitance value The specifications listed at right shall be met when the capacitors are restored to 20 after the rated voltage is applied for 2000 hours Endurance C ESR 300% or less than the initial specified value at 60 C. Leakage current Less than or equal to the initial specified value Within 30% of the initial capacitance value Capacitance change The specifications listed at right shall be met when the capacitors Shelf Life are restored to 20C after storing the capacitors under no load ESR 300% or less than the initial specified value for 2000 hours at 60C. Leakage current Less than or equal to the initial specified value Marking Printed with white color letter on black sleeve. Type numbering system (Example : 2.5V 150F) Drawing Polarity bar ( ) Sleeve P.E.T. 1 2 3 4 5 6 7 8 9 10 11 12 J J C 0 E 1 5 7 M E L C Case dia. code Configuration 2 D Code L 22 Z 4.00.5 Capacitance tolerance (20%) Pressure relief vent 25 A Rated capacitance (150F) 30 B +0.2 Rated voltage (2.5V) 0.8 35 C -0.1 Series name Type 0.1 2-2 +0.2 1.5 -0.1 (PC board hole dimensions) (Terminal dimensions) Dimensions Rated DCR Note : Case size D L (mm) ESR(m ) Cap. Voltage Typical Cap. (at 1kHz ) The capacitance calculated from discharge time ( T) with code ( code ) (m ) 22 (Z) 25 (A) 30 (B) 35 (C) ( F ) constant current ( i ) after 30minuite charge with rated 15 156 120 160 22 20 voltage (2.5V). 18 186 120 140 25 20 The discharge current ( i ) is 0.01 rated capacitance (F). 22 The discharge time ( T) measured between 2V and 1V 226 90 130 30 20 with constant current. 27 276 90 110 22 30 30 20 The capacitance calculated bellow. 33 35 20 336 80 90 25 30 Capacitance (F) = i T 39 35 20 396 80 80 22 35 25 30 2.5V 47 476 70 60 22 40 25 35 (0E) 56 566 70 50 25 40 30 30 68 35 30 686 60 45 82 826 60 35 25 50 30 40 100 35 35 107 50 30 120 35 40 127 50 25 30 50 150 35 50 157 40 22 The listed DCR value is typical and therefore not a guaranteed value. CAT.8100A 0.8 +0.2 -0.1 +1MAX. D 0.5 4.0 2.5