MPH MKP axial wire or lugs terminals high current high frequency switching applications Main applications Damp heat test (steady state) Storage, high frequency, high ripple current applications, input Test conditions: and output filtering in SMPSs, resonant circuits, high-end audio Temperature = +40 2C applications Relative humidity =93 2% Test duration = 21 days Dielectric Performance: Polypropylene Capacitance change 2% Electrodes DF change 0.0010 at 1kHz Vacuum deposited metal layers R 50% of initial limit value INS Coating Endurance test UL 510 / CSA TIL I-26 polyester tape wrapping UL 94 V-0 resin end fill. Test conditions: Flame retardant execution Temperature = +85 2C Test duration = 1000h Construction Voltage applied = 1.25xUr (DC) Extended metallized film (refer to General Technical Information) Performance: Terminals Capacitance change 3% Tinned copper wire (lead free) DF change 0.0010 at 1kHz R 50% of initial limit value Reference standard INS IEC 60384/16, IEC 60068, MIL-C 55514/9, RoHS compliant Resistance to soldering heat test (wire terminals only) Climatic category Test conditions: 55/100/21(IEC 60068/1), FME (DIN40040) Solder bath temperature= +2605C Please refer also to paragraph C10 (humid ambient) of the General Dipping time (with heat screen)= 101s Technical Information Performance: Capacitance change 1% Operating temperature range (case) DF change 0.0010 at 1kHz -55...+105C R 50% of initial limit value INS Nominal Capacitance (Cn) F 1F to 30F. Refer to article table Capacitance tolerance (at 1kHz) 10% (code=K), 5% (code=J) and 20% (code=M). Other tolerances upon request Capacitance temperature coefficient Refer to General Technical Information Long term stability (at 1kHz) Capacitance variation 1% after a period of 2 years at standard environmental conditions Rated voltage (Ur) (Vdc) at 85C 100, 200, 400 Vdc (Permissible AC voltage at 60Hz: 60, 120, 200 Vac) Non recurrent surge voltage (Upk) at 85C 200, 400, 800Vdc Category voltage (Uc) Uc=Ur at +105C Self inductance 1nH/mm of capacitor and leads length used for connection Maximum pulse rise time V/s Refer to article table Dissipation factor (DF), max. tg x10-4, measured at 25 5C 1 kHz 10 Insulation resistance (R ) INS Measured between terminals, at 25C, after 1 minute of electrification at 100Vdc: R 100000s INS Test voltage between terminals (Ut) 1,6xUr (DC) applied for 2s at 255C (1 minute for type test) 11.1 EEdd. 04 R. 04 Revev. 00. 00 09.201809.2018MPH MKP axial wire or lugs terminals high current high frequency switching applications MPH wire terminals style article table (different values available upon request) Voltage at (2) (3) (1) Cn Dimensions (mm) du/dt Ipeak Maximum ripple current (A rms) 20100kHz ESR ICEL CODE +85C Ur Upk F D L d V/s A +25C +35C +45C +55C +65C +75C +85C m - (Vdc) (Vdc) 100 200 1 13,4 19 0,8 10 10 9,2 8,5 7,8 7 6 4,9 4,5 15 MPH1104100*D 100 200 2 15,1 24 0,8 10 20 10,8 10 9,1 8,2 7 5,8 5,3 12 MPH1104200*E 100 200 3 18,2 24 1 10 30 12,1 11,2 10,3 9,2 8 6,5 5,9 11 MPH1104300*E 100 200 5 18,6 32 1 10 50 13,8 12,7 11,6 10,4 9 7,4 6,7 10 MPH1104500*J 100 200 10 22,8 38 1 10 100 15 15 14,2 12,7 11 9 8,2 9 MPH1105100*L 100 200 20 25,4 57 1 10 200 15 15 15 15 13,6 11,1 10 8 MPH1105200*S 100 200 30 30,4 57 1 10 300 15 15 15 15 15 12,4 11,4 6 MPH1105300*S 200 400 1 13 32 0,8 15 15 7,3 7,3 7,3 7,3 7,2 5,9 5,4 20 MPH1204100*J 200 400 2 17,7 32 0,8 15 30 12 12 11,3 10,1 8,7 7,1 6,5 15 MPH1204200*J 200 400 3 18,9 38 1 15 45 15 13,8 12,6 11,3 9,8 8 7,3 13 MPH1204300*L 200 400 5 21,8 44 1 15 75 15 15 14,7 13,1 11,4 9,3 8,5 11 MPH1204500*N 200 400 10 26,1 57 1 15 150 15 15 15 15 13,8 11,1 10 9 MPH1205100*S 200 400 20 36,5 57 1 15 300 15 15 15 15 15 14,1 12,8 6 MPH1205200*S 400 800 1 18,1 38 1 20 20 9,5 9,5 9,5 9,5 9,5 7,8 7,1 19 MPH1404100*L 400 800 2 22,7 44 1 20 40 15 15 15 13,4 11,6 9,5 8,7 15 MPH1404200*N 400 800 3 27,5 44 1 20 60 15 15 15 15 13,1 10,7 9,8 12 MPH1404300*N 400 800 5 30,2 57 1 20 100 15 15 15 15 15 12,5 11,4 10 MPH1404500*S 400 800 10 42,3 57 1 20 200 15 15 15 15 15 15 14,1 6 MPH1405100*S (1) Change the * symbol with the needed capacitance tolerance code: J=5%, K=10%, M=20% (2) Maximum ripple current as function of case temperature, C tol. 10% (3) Max values for f=20100kHz Warning: this specification must be completed with the data given in the General technical information chapter 11.2 Ed. 04 Rev. 00 09.2018