PCH1J220MCL4GS Nichicon

CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS Chip Type, Higher Capacitance Expanded High Temperature Range PCH High reliability, High voltage (to 80V). Low ESR, High ripple current. Long life of 4000 hours at 135C. SMD type : Lead free reflow soldering condition at 260C peak complete correspondence. High Temperature PCR Compliant to the RoHS directive (2011/65/EU). PCH ESR after Endurance at -40C. AEC-Q200 compliant. Please contact us for details. Specifications Item Performance Characteristics Category Temperature Range 55 to +135C Rated Voltage Range 16 to 80V Rated Capacitance Range 12 to 1000F Capacitance Tolerance 20% at 120Hz, 20C Less than or equal to the specified value 120Hz, 20C Tangent of loss angle (tan ) at ESR ( 1) Less than or equal to the specified value at 100kHz, 20C Leakage Current ( 2) After 2 minutes application of rated voltage, leakage current is not more than 0.03CV or 3(A), whichever is greater. Temperature Characteristics Z55C / Z+20C 1.25 (100kHz) (Max.Impedance Ratio) Capacitance change Within 20% of initial capacitance value ( 3) The specifications listed at right shall be met when the tan 150% or less of the initial specified value Endurance capacitors are restored to 20C after the rated voltage is ( 1) ESR 200% or less of the initial specified value applied for 4000 hours (2000 hours for D = 6.3) at 135C. Leakage current ( 2) Less than or equal to the initial specified value After storing the capacitors under no load at 135C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 Shelf Life clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. ( 1) ESR after Endurance Less than or equal to the specified value at 100kHz, -40C Capacitance change Within 20% of initial capacitance value ( 3) The specifications listed at right shall be met when the Damp Heat tan 150% or less of the initial specified value capacitors are restored to 20C after the rated voltage is ESR ( 1) 200% or less of the initial specified value (Steady State) applied for 2000 hours at 85C, 85% RH. Leakage current ( 2) Less than or equal to the initial specified value After soldering the capacitor under the soldering conditions prescribed here, the capacitor shall meet the specifications listed at right. Capacitance change Within 10% of the initial capacitance value ( 3) Pre-heating shall be done at 150 to 200C and for 60 to 180 sec. Resistance to tan 130% or less than the initial specified value The duration for over +230C temperature at capacitor surface shall ESR ( 1) 130% or less than the initial specified value not exceed 60 seconds. Soldering Heat Leakage current ( 2) In case peak temperature is 260C or less, reflow soldering shall be Less than or equal to the initial specified value two times maximum. Measurement for solder temperature profile shall be made at the capacitor top and the terminal. Marking Navy blue print on the case top 1 ESR should be measured at both of the terminal ends closest where the terminals protrude through the plastic platform. 2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120 minutes at 105C. 3 Initial value : The value before test of examination of resistance to soldering. Type numbering system (Example : 35V 150F) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Dimensions P C H 1 V 1 5 1 M C L 1 G S Positive Taping code Plastic platform Size code Capacitance Lot No. C0.2 0.3 MAX. Configuration Capacitance tolerance (20%) Rated capacitance (150F) Rated voltage (35V) Series name Type 6.3: 0.3 Voltage (V:35V) Series H Negative 8,10:0.5 Voltage (mm) Size 6.3 6L 6.3 8L 8 7L 8 10L 8 12L 10 8L 10 10L 10 12.7L V 16 20 25 35 50 63 80 6.3 6.3 8.0 8.0 8.0 10.0 10.0 10.0 D Code C D E V H J K 5.9 7.9 6.9 9.9 11.9 7.9 9.9 12.6 L A 7.3 7.3 9.0 9.0 9.0 11.0 11.0 11.0 6.6 6.6 8.3 8.3 8.3 10.3 10.3 10.3 B Frequency coefficient of rated ripple current C 6.6 6.6 8.3 8.3 8.3 10.3 10.3 10.3 0 Frequency0/ 120Hz 1kHz 10kHz 100kHz or more 2.1 2.1 3.2 3.2 3.2 4.6 4.6 4.6 E 0.5 to 0.8 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 Coefficient 0.05 0.30 0.70 1.00 H A p r. 2 019 C H 1 5 0 V 0 1 2 D0.5 B0.2 E 0.5 MAX. A0.2CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS PCH Dimensions Low temp. Initial Rated Ripple ESR after Rated Voltage Surge Voltage Rated Capacitance Case Size ESR Endurance tan (mArms) Part Number (m) D L (mm) (V)(code) (V) (F) (m) (135C / 100kHz) (20C / 100kHz) (-40C / 100kHz) 120 6.3 6 0.08 36 72 900 PCH1C121MCL1GS 220 6.3 8 0.08 23 46 1500 PCH1C221MCL4GS 220 30 60 8 7 0.08 1100 PCH1C221MCL1GS 16 470 8 10 0.08 17 34 2400 PCH1C471MCL6GS 20 1C 470 10 8 0.08 22 44 1900 PCH1C471MCL1GS 560 8 12 0.08 16 32 2700 PCH1C561MCL1GS 680 10 10 0.08 19 38 2300 PCH1C681MCL1GS 26 1000 10 12.7 0.08 13 2500 PCH1C102MCL1GS 100 6.3 6 0.08 41 82 900 PCH1D101MCL1GS 150 6.3 8 0.08 25 50 1200 PCH1D151MCL4GS 150 8 7 0.08 39 78 800 PCH1D151MCL1GS 330 8 10 0.08 19 38 2300 PCH1D331MCL6GS 20 25 1D 330 10 8 0.08 23 46 1800 PCH1D331MCL1GS 470 8 12 0.08 18 36 2500 PCH1D471MCL1GS 560 10 10 0.08 20 40 2200 PCH1D561MCL1GS 680 0.08 14 28 10 12.7 3000 PCH1D681MCL1GS 56 6.3 6 0.08 43 86 900 PCH1E560MCL1GS 6.3 8 100 0.08 27 54 1100 PCH1E101MCL4GS 100 8 7 0.08 41 82 800 PCH1E101MCL1GS 220 8 10 0.08 20 40 2300 PCH1E221MCL6GS 25 31 1E 220 48 10 8 0.08 24 1800 PCH1E221MCL1GS 270 8 12 0.08 19 38 2300 PCH1E271MCL1GS 330 10 10 0.08 20 40 2200 PCH1E331MCL1GS 470 10 12.7 0.08 15 30 PCH1E471MCL1GS 2900 6.3 6 47 0.08 48 96 800 PCH1V470MCL1GS 6.3 8 68 0.08 31 62 1100 PCH1V680MCL4GS 68 8 7 0.08 44 88 800 PCH1V680MCL1GS 35 150 8 10 0.08 22 44 2200 PCH1V151MCL6GS 43 1V 150 10 8 0.08 25 50 1800 PCH1V151MCL1GS 220 8 12 0.08 21 42 2300 PCH1V221MCL1GS 270 10 10 0.08 20 40 2200 PCH1V271MCL1GS 330 10 12.7 0.08 16 32 2800 PCH1V331MCL1GS 6.3 6 22 0.08 50 100 700 PCH1H220MCL1GS 39 6.3 8 72 900 0.08 36 PCH1H390MCL4GS 39 8 7 0.08 45 90 900 PCH1H390MCL1GS 82 8 10 0.08 26 52 2100 PCH1H820MCL6GS 50 63 1H 82 10 8 0.08 34 68 1600 PCH1H820MCL1GS 120 8 12 0.08 25 50 2100 PCH1H121MCL2GS 120 10 10 0.08 25 50 2100 PCH1H121MCL1GS 180 10 12.7 0.08 19 38 2500 PCH1H181MCL1GS 6.3 6 12 0.08 51 102 700 PCH1J120MCL1GS 22 6.3 8 0.08 45 90 800 PCH1J220MCL4GS 22 8 7 0.08 48 96 800 PCH1J220MCL1GS 39 8 10 0.08 28 56 1900 PCH1J390MCL1GS 63 79 1J 47 10 8 0.08 35 70 1500 PCH1J470MCL1GS 56 8 12 0.08 27 54 2100 PCH1J560MCL1GS 68 56 2000 10 10 0.08 28 PCH1J680MCL1GS 100 10 12.7 0.08 24 48 2100 PCH1J101MCL1GS 12 6.3 8 0.08 50 100 800 PCH1K120MCL1GS 27 8 10 0.08 38 76 1000 PCH1K270MCL1GS 80 100 39 8 12 0.08 35 70 1100 PCH1K390MCL1GS 1K 1200 47 10 10 0.08 33 66 PCH1K470MCL1GS 68 10 12.7 0.08 28 56 1500 PCH1K680MCL1GS No marked, 1 will be put at 12th digit of type numbering system. : In this case, 4 will be put at 12th digit of type numbering system. : In this case, 2 will be put at 12th digit of type numbering system. : In this case, 6 will be put at 12th digit of type numbering system.