PMB / RMB MKP with double side met. current carriers box with lug terminals snubber high pulse applications high current high frequency RMB: small size Main applications Temperature de-rated voltage Snubber capacitor for energy conversion and control in power PMB: for operating temperature (case)> +85C semiconductor circuits, IGBT modules protection and SMPS protection Ur must be decreased 1,5% for every C exceeding +85C circuits, resonant circuits, high voltage, high current and high pulse Urms must be decreased 2,5% for every C exceeding +85C applications RMB: not applicable Dielectric Non recurrent surge voltage (Upk) at 85C Polypropylene PMB: 1100, 1300, 1550, 1750, 2200, 2600, 3300, 4000 Vdc RMB: 950, 1200, 1300, 1600, 2000, 2400, 3000, 3500 Vdc Electrodes Vacuum deposited metal layers Self inductance 1nH/mm of fixing pitch Coating Solvent resistant plastic case with resin sealing (UL 94 V-0). Flame Maximum pulse rise time V/s retardant execution Refer to article table Construction Maximum peak current (Ipeak) Extended double side metallized carrier film with internal series Refer to article table. Max. non repetitive Ipk = 1,5 x Ipeak connection and metallized film (refer to General Technical Dissipation factor (DF), max. Information) -4 tg x10 , measured at 25 5C, 1 kHz Terminals Cn 0.1 F 0.1 F < Cn 1 F 1 F < Cn 5.6 F 5.6 F < Cn 9 F Cn > 9 F Tinned copper (brass) lugs (lead-free) for screw fixing (please refer to 6 5 6 7 9 article table) Degree of protection Insulation resistance (R ) INS IP00 30000s but need not exceed 30 G, between terminals, at Installation 25C, after 1 minute of electrification at 100 Vdc Whatever position assuring correct heat dissipation. Arrangement of Test voltage between terminals (Ut) many components with box walls in contact not admitted suggested 1,6xUr (DC) applied for 10s / 2xUr (DC) applied for 2s, at 255C minimum distance between side by side elements 1/8 of the box thickness (B size). Box with lugs terminals must be free to correctly Test voltage between terminals and case (Utc) dissipate from all the body faces 3kV 5060Hz applied for 60s at 25 5C Reference standard Damp heat test (steady state) IEC 61071, IEC 60068, RoHS compliant Test conditions: Temperature = +40 2C Climatic category Relative humidity =93 2% 40/85/56 (IEC 60068/1), GPD (DIN40040) Test duration = 56 days Please refer also to paragraph C10 (humid ambient) of the General Technical Information Performance: Capacitance change 2% Operating temperature range (case) DF change 0.0010 at 1kHz PMB: -40...+85C (+100C observing voltage and current de-rating) R 50% of initial limit value INS RMB: -40...+85C Typical capacitance change versus operating time Max. permissible ambient temperature -3% after 30000 hours at Urms or after 100000 hours at Ur PMB: +70C, operation at rated power, current, voltage and natural Life expectancy cooling (+85C observing voltage and current de-rating) RMB: +70C operation at rated power,current, voltage and natural 100000 hours (Ur) 30000 hours (Urms) cooling Failure quota 9 Nominal Capacitance (Cn) F 300/10 component hours 0,047F to 12F. Refer to article table Capacitance tolerance (at 1kHz) 10% (code=K), 5% (code=J). Other tolerances upon request Capacitance temperature coefficient Refer to General Technical Information Long term stability (at 1kHz) Capacitance variation 1% after a period of 2 years at standard environmental conditions Rated voltage (Ur) (Vdc) at 85C 700, 850, 1000, 1200, 1500, 2000, 2500, 3000 Vdc 24.1 EEdd. 04 R. 04 Revev. 00. 00 09.201809.2018PMB / RMB MKP with double side met. current carriers box with lug terminals snubber high pulse applications high current high frequency RMB: small size Dimensions in mm (drawings not in scale) Style SP-SPM8 / SR-SRM8 Style VP-VPM8 / VR-VRM8 Fixing pitch and distance between lugs (mm) Style FP-FPM8 / FR-FRM8 Lugs style L P1 P2 SP-SPM8 4242,5 2328(M6) 2526(M8) 11min. VP-VPM8 57,5 3742(M6) 3940(M8) 24min. FP-FPM8 SR-SRM8 4242,5 2025(M6) 2223(M8) 8min. VR-VRM8 57,5 3439(M6) 3637(M8) 21min. FR-FRM8 Fixing slot size (mm)** SP, VP, FP, SR, VR, FR A= 6min. SPM8, VPM8, FPM8, SRM8, VRM8, FRM8 A= 8min. ** Standard fi xing slots for M6 screws, slots for M8 screws available upon request Style SN-SNM8 (for L=57,5mm only) Style VN-VNM8 (for L=57,5mm only) Fixing pitch and distance between lugs (mm) Fixing slot size (mm)** SN, VN A= 6min. Lugs style L P1 P2 SNM8, VNM8 A= 8min. 4242,5 Not available SN-SNM8 VN-VNM8 ** Standard fi xing slots for M6 screws, 57,5 2328 (M6) 2526 (M8) 11min. slots for M8 screws available upo request Style AP Fixing pitch and distance between lugs (mm) Lugs style L P1 P2 4242,5 53,563 (M8) - AP 57,5 68,577 (M8) - 24.2 Ed. 04 Rev. 00 09.2018