PSB / RSB MKP with double side met. current carriers box with multiple radial terminals snubber high pulse applications high current high frequency RSB: small size Main applications Temperature de-rated voltage Snubber capacitor for energy conversion and control in power PSB: for operating temperature (case)> +85C semiconductor circuits, resonant circuits, protection circuits in Ur must be decreased 1,5% for every C exceeding +85C SMPSs, induction heaters, high voltage, high current and high pulse Urms must be decreased 2,5% for every C exceeding +85C applications RSB: not applicable Dielectric Non recurrent surge voltage (Upk) at 85C Polypropylene PSB: 1100, 1300, 1550, 1750, 2200, 2600, 3300, 4000 Vdc RSB: 950, 1200, 1300, 1600, 2000, 2400, 3000, 3500 Vdc Electrodes Vacuum deposited metal layers Self inductance 1nH/mm of fixing pitch Coating Solvent resistant plastic case with resin sealing (UL 94 V-0). Flame Maximum pulse rise time V/s retardant execution Refer to article table Construction Maximum peak current (Ipeak) Extended double side metallized carrier film with internal series Refer to article table. Max. non repetitive Ipk = 1,5 x Ipeak connection and metallized film (refer to General Technical Dissipation factor (DF), max. Information) -4 tg x10 , measured at 25 5C, 1 kHz Terminals Cn 0.1 F 0.1 F < Cn 1 F 1 F < Cn 5.6 F 5.6 F < Cn 9 F Cn > 9 F Tinned copper wire (lead-free). 2x terminals (S=51mm, L=255mm 6 5 6 7 9 terminals length), 4x terminals (SD=5,51,5mm) or 6x terminals (ST=5,51,5mm) execution Insulation resistance (R ) INS Degree of protection 30000s but need not exceed 30 G, between terminals, at IP00 25C, after 1 minute of electrification at 100 Vdc Installation Test voltage between terminals (Ut) Whatever position assuring correct heat dissipation. Arrangement of 1,6xUr (DC) applied for 10s / 2xUr (DC) applied for 2s, at 255C many components with box walls in contact not admitted suggested minimum distance between side by side elements 1/8 of the box Test voltage between terminals and case (Utc) thickness (B size) 3kV 5060Hz applied for 60s at 25 5C Reference standard Damp heat test (steady state) IEC 61071, IEC 60068, RoHS compliant Test conditions: Temperature = +40 2C Climatic category Relative humidity =93 2% 40/85/56 (IEC 60068/1), GPD (DIN40040) Test duration = 56 days Please refer also to paragraph C10 (humid ambient) of the General Technical Information Performance: Capacitance change 2% Operating temperature range (case) DF change 0.0010 at 1kHz PSB: -40...+85C (+100C observing voltage and current de-rating) R 50% of initial limit value INS RSB: -40...+85C Typical capacitance change versus operating time Max. permissible ambient temperature -3% after 30000 hours at Urms or after 100000 hours at Ur PSB: +70C, operation at rated power, current, voltage and natural Life expectancy cooling (+85C observing voltage and current de-rating) 100000 hours (Ur) 30000 hours (Urms) RSB: +70C operation at rated power,current, voltage and natural cooling Failure quota 9 300/10 component hours Nominal Capacitance (Cn) F 0,0047F to 12F. Refer to article table Resistance to soldering heat test Capacitance tolerance (at 1kHz) Test conditions: 10% (code=K), 5% (code=J) and 20% (code=M). Other tolerances Solder bath temperature= +2605C upon request Dipping time (with heat screen)= 101s Performance: Capacitance temperature coefficient Capacitance change 1% Refer to General Technical Information DF change 0.0010 at 1kHz Long term stability (at 1kHz) R 50% of initial limit value INS Capacitance variation 1% after a period of 2 years at standard environmental conditions Rated voltage (Ur) (Vdc) at 85C 700, 850, 1000, 1200, 1500, 2000, 2500, 3000 Vdc 23.1 Ed. 04 Rev. 00 09.2018PSB / RSB MKP with double side met. current carriers box with multiple radial terminals snubber high pulse applications high current high frequency RSB: small size PSB / RSB article table (different values available upon request) (2) (3) (1) Voltage at +85C Cn Dimensions (mm) du/dt Ipeak Irms ESR ICEL CODE Ur Urms Upk F B H L d P P1 V/s A A m - (4) (Vdc) (Vac) (Vdc) 700 420 1100 0,1 7 16 26,5 0,8 22,5 - 1200 120 4 13,3 PSB1702100*G 700 420 1100 0,15 10 18,5 26,5 0,8 22,5 - 1200 180 5,5 9,5 PSB1703150*G 700 420 1100 0,22 11 20 26,5 0,8 22,5 - 1200 264 6,5 7 PSB1703220*G 700 420 1100 0,22 11 20 32 0,8 27,5 - 900 198 6,5 8 PSB1703220*H 700 420 1100 0,33 13 22 32 1 27,5 - 900 297 8,5 6 PSB1703330*H 700 420 1100 0,47 15 24,5 32 1 27,5 - 900 423 10 4,8 PSB1703470*H 700 420 1100 0,68 18 33 32 1,2 27,5 - 900 612 14 3,8 PSB1703680*H 700 420 1100 0,68 18 33 32 1,2 27,5 5,1 900 612 17 3,1 PSB1703680*HSD 700 420 1100 1 22 37 32 1,2 27,5 - 900 900 14 3,2 PSB1704100*H 700 420 1100 1 22 37 32 1,2 27,5 10,2 900 900 21 2,5 PSB1704100*HSD 700 420 1100 1 17 28 42,5 1,2 37,5 - 600 600 13,5 4 PSB1704100*J 700 380 950 1,2 18 33 32 1,2 27,5 - 720 864 13,5 4,2 RSB1704120*H 700 420 1100 1,2 17 32 42 1,2 37,5 - 600 720 14 3,8 PSB1704120*J 700 420 1100 1,5 22 30 42,5 1,2 37,5 - 600 900 14 3,6 PSB1704150*J 700 420 1100 1,5 22 30 42,5 1,2 37,5 10,2 600 900 17 2,9 PSB1704150*JSD 700 380 950 1,5 17 28 42,5 1,2 37,5 - 455 682,5 11 5,6 RSB1704150*J (1) Change the * symbol with the needed Cap. tol. code: J=5%, K=10%, M=20% and the symbol with S for 5mm or with L for 25 mm lead length (2) Max. at 100kHz, +70C for case operating T= +85C (PSB only: at T amb. >+70C and T case>+85C voltage and current de-rating must be observed), C tol. 10% (for wider C tolerances, ESR variation must be taken in consideration) (3) Typical values at 100kHz (for operating frequencies far from the reference, ESR variation and related power dissipation variation must be taken in consideration) (4) Not suitable for across the line application ( ) : not available with C tolerance 10% 23.2 Ed. 04 Rev. 00 09.2018