ALUMINUM ELECTROLYTIC CAPACITORS ALUMINUM ELECTROLYTIC CAPACITORS Wide Temperature Range, Permissible Abnormal Voltage UAQ UAQ Dimensions Improved safety feature for abnormally excessive voltage. Leakage Current UAQ High ripple current product. Rated Voltage Rated Rated Ripple Case Size A Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). V Capacitance tan mArms Part Number DLmm at 20 after Smaller code F 105/120Hz 1 minute 22 1020 0.15 276 120 UAQ2D220MPD UAS Specifications 33 1025 0.15 364 160 UAQ2D330MPD Performance Characteristics Item 33 12.520 0.15 364 160 UAQ2D330MHD6 Category Temperature Range 40 to +105C Rated Voltage Range 200 400V 47 1031.5 0.15 476 195 UAQ2D470MPD Rated Capacitance Range 10 to 220F 47 12.520 0.15 476 195 UAQ2D470MHD6 Capacitance Tolerance 20% at 120Hz, 20C Leakage Current After 1 minute s application of rated voltage at 20C, leakage current is 0.04CV+100 ( A) or less. 56 12.525 0.15 548 210 UAQ2D560MHD Rated voltage (V) 200 400 Measurement frequency:120Hz at 20C Tangent of loss angle (tan ) 68 12.525 0.15 644 250 UAQ2D680MHD tan (MAX.) 0.15 0.15 82 12.531.5 0.15 756 285 UAQ2D820MHD Rated voltage (V) Measurement frequency : 120Hz 200 400 Stability at Low Temperature Z25C / Z+20C 3 8 82 1620 0.15 756 285 UAQ2D820MHD6 Impedance ratio (MAX.) Z40C / Z+20C 6 10 200 100 12.535.5 0.15 900 335 UAQ2D101MHD 2D The specifications listed at right shall be met when the Capacitance change Within 20% of the initial capacitance value capacitors are restored to 20C after D.C. bias plus rated 100 1625 0.15 900 335 UAQ2D101MHD6 Endurance 200% or less than the initial specified value tan ripple current is applied for 2000 hours at 105C, the peak Leakage current Less than or equal to the initial specified value 100 1820 0.15 900 335 UAQ2D101MHD3 voltage shall not exceed the rated voltage. After storing the capacitors under no load at 105C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 150 1631.5 0.15 1300 435 UAQ2D151MHD Shelf Life clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. The pressure relief vent will operate in normal conditions, with no dangerous conditons such as flames, ignitions or dispersion of pieces of the capacitor and / or case. 150 1825 0.15 1300 435 UAQ2D151MHD6 Test conditions voltage (V) 150 2220 0.15 1300 435 UAQ2D151MRD3 Limited DC current Test Voltage Safety Performance 200 4A 300VDC and 375VDC 180 1635.5 0.15 1540 495 UAQ2D181MHD 400 2A 500VDC and 600VDC Marking Printed with white color letter on dark brown sleeve. 180 1831.5 0.15 1540 495 UAQ2D181MHD6 180 2225 0.15 1540 495 UAQ2D181MRD3 220 1835.5 0.15 1860 575 UAQ2D221MHD Type numbering system (Example : 200V 100F) Radial Lead Type 10 12.520 0.15 260 100 UAQ2G100MHD Sleeve (P.E.T.) d 1 2 3 4 5 6 7 8 9 10 11 12 22 12.531.5 0.15 452 145 UAQ2G220MHD U A Q 2 D 1 0 1 M H D 22 1620 0.15 452 145 UAQ2G220MHD6 Size code Configuration 33 12.540 0.15 628 195 UAQ2G330MHD Capacitance tolerance (20%) 33 1625 0.15 628 195 UAQ2G330MHD6 Rated capacitance (100F) (mm) Rated voltage (200V) 33 1820 0.15 628 195 UAQ2G330MHD3 Pressure D 10 12.5 16 18 22 Series name relief vent 47 1635.5 0.15 852 280 UAQ2G470MHD P 5.0 5.0 7.5 7.5 10 + MAX. L MIN MIN Type 15 4 d 0.6 0.6 0.8 0.8 1.0 400 Configuration 47 1825 0.15 852 280 UAQ2G470MHD6 0.5 0.5 0.5 0.5 1.0 2G Pb-free leadwire D In case L>25 for 12.5 (D) case sizes, Pb-free PET sleeve 47 2220 0.15 852 280 UAQ2G470MRD3 lead diameter 0.8 (d) will be applied. 10 PD 12.5 to 18 HD 56 1635.5 0.15 996 320 UAQ2G560MHD (D 18) 2.0 (D >18) 3.0 22 RD 56 1831.5 0.15 996 320 UAQ2G560MHD6 Please refer to the Guidelines for Aluminum Electrolytic Capacitors 56 2225 0.15 996 320 UAQ2G560MRD3 for end seal configuration information. 68 1640 0.15 1188 350 UAQ2G680MHD 68 1835.5 0.15 1188 350 UAQ2G680MHD6 82 1840 0.15 1412 420 UAQ2G820MHD Frequency coefficient of rated ripple current For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit). Frequency 50, 60Hz 120Hz 300Hz 1kHz 10kHz or more If there is no size code in the part number, please add size code 1 and then add the appropriate code. Coefficient 0.80 1.00 1.25 1.40 1.60 For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. Dimension table in next page. CAT.8100K + MAX. D 0.5 PALUMINUM ELECTROLYTIC CAPACITORS ALUMINUM ELECTROLYTIC CAPACITORS Wide Temperature Range, Permissible Abnormal Voltage UAQ UAQ Dimensions Improved safety feature for abnormally excessive voltage. Leakage Current UAQ High ripple current product. Rated Voltage Rated Rated Ripple Case Size A Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). V Capacitance tan mArms Part Number DLmm at 20 after Smaller code F 105/120Hz 1 minute 22 1020 0.15 276 120 UAQ2D220MPD UAS Specifications 33 1025 0.15 364 160 UAQ2D330MPD Performance Characteristics Item 33 12.520 0.15 364 160 UAQ2D330MHD6 Category Temperature Range 40 to +105C Rated Voltage Range 200 400V 47 1031.5 0.15 476 195 UAQ2D470MPD Rated Capacitance Range 10 to 220F 47 12.520 0.15 476 195 UAQ2D470MHD6 Capacitance Tolerance 20% at 120Hz, 20C Leakage Current After 1 minute s application of rated voltage at 20C, leakage current is 0.04CV+100 ( A) or less. 56 12.525 0.15 548 210 UAQ2D560MHD Rated voltage (V) 200 400 Measurement frequency:120Hz at 20C Tangent of loss angle (tan ) 68 12.525 0.15 644 250 UAQ2D680MHD tan (MAX.) 0.15 0.15 82 12.531.5 0.15 756 285 UAQ2D820MHD Rated voltage (V) Measurement frequency : 120Hz 200 400 Stability at Low Temperature Z25C / Z+20C 3 8 82 1620 0.15 756 285 UAQ2D820MHD6 Impedance ratio (MAX.) Z40C / Z+20C 6 10 200 100 12.535.5 0.15 900 335 UAQ2D101MHD 2D The specifications listed at right shall be met when the Capacitance change Within 20% of the initial capacitance value capacitors are restored to 20C after D.C. bias plus rated 100 1625 0.15 900 335 UAQ2D101MHD6 Endurance 200% or less than the initial specified value tan ripple current is applied for 2000 hours at 105C, the peak Leakage current Less than or equal to the initial specified value 100 1820 0.15 900 335 UAQ2D101MHD3 voltage shall not exceed the rated voltage. After storing the capacitors under no load at 105C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 150 1631.5 0.15 1300 435 UAQ2D151MHD Shelf Life clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. The pressure relief vent will operate in normal conditions, with no dangerous conditons such as flames, ignitions or dispersion of pieces of the capacitor and / or case. 150 1825 0.15 1300 435 UAQ2D151MHD6 Test conditions voltage (V) 150 2220 0.15 1300 435 UAQ2D151MRD3 Limited DC current Test Voltage Safety Performance 200 4A 300VDC and 375VDC 180 1635.5 0.15 1540 495 UAQ2D181MHD 400 2A 500VDC and 600VDC Marking Printed with white color letter on dark brown sleeve. 180 1831.5 0.15 1540 495 UAQ2D181MHD6 180 2225 0.15 1540 495 UAQ2D181MRD3 220 1835.5 0.15 1860 575 UAQ2D221MHD Type numbering system (Example : 200V 100F) Radial Lead Type 10 12.520 0.15 260 100 UAQ2G100MHD Sleeve (P.E.T.) d 1 2 3 4 5 6 7 8 9 10 11 12 22 12.531.5 0.15 452 145 UAQ2G220MHD U A Q 2 D 1 0 1 M H D 22 1620 0.15 452 145 UAQ2G220MHD6 Size code Configuration 33 12.540 0.15 628 195 UAQ2G330MHD Capacitance tolerance (20%) 33 1625 0.15 628 195 UAQ2G330MHD6 Rated capacitance (100F) (mm) Rated voltage (200V) 33 1820 0.15 628 195 UAQ2G330MHD3 Pressure D 10 12.5 16 18 22 Series name relief vent 47 1635.5 0.15 852 280 UAQ2G470MHD P 5.0 5.0 7.5 7.5 10 + MAX. L MIN MIN Type 15 4 d 0.6 0.6 0.8 0.8 1.0 400 Configuration 47 1825 0.15 852 280 UAQ2G470MHD6 0.5 0.5 0.5 0.5 1.0 2G Pb-free leadwire D In case L>25 for 12.5 (D) case sizes, Pb-free PET sleeve 47 2220 0.15 852 280 UAQ2G470MRD3 lead diameter 0.8 (d) will be applied. 10 PD 12.5 to 18 HD 56 1635.5 0.15 996 320 UAQ2G560MHD (D 18) 2.0 (D >18) 3.0 22 RD 56 1831.5 0.15 996 320 UAQ2G560MHD6 Please refer to the Guidelines for Aluminum Electrolytic Capacitors 56 2225 0.15 996 320 UAQ2G560MRD3 for end seal configuration information. 68 1640 0.15 1188 350 UAQ2G680MHD 68 1835.5 0.15 1188 350 UAQ2G680MHD6 82 1840 0.15 1412 420 UAQ2G820MHD Frequency coefficient of rated ripple current For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit). Frequency 50, 60Hz 120Hz 300Hz 1kHz 10kHz or more If there is no size code in the part number, please add size code 1 and then add the appropriate code. Coefficient 0.80 1.00 1.25 1.40 1.60 For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. Dimension table in next page. CAT.8100K + MAX. D 0.5 P