ALUMINUM ELECTROLYTIC CAPACITORS High Temperature Range, For +125C Use UBT Highly dependable reliability withstanding load life of 2000 to 10000 hours at +125C. Suited for automobile electronics where heavy duty services are indispensable. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). AEC-Q200 compliant. Please contact us for details. UBW High Temperature Higher UBY Capacitance UBT Specifications Item Performance Characteristics Category Temperature Range 40 to +125C (10 to 250V), 25 to +125C (350 to 450V) Rated Voltage Range 10 to 450V Rated Capacitance Range 4.7 to 4700F Capacitance Tolerance 20% at 120Hz, 20C Rated Voltage (V) 10 to 100 160 to 450 Leakage Current < After 1 minute s application of rated voltage at 20C, leakage CV 1000 : I = 0.1CV+40 (A) or less. = Leakage current current is not more than 0.03CV or 4 (A), whichever is greater. CV > 1000 : I = 0.04CV+100 (A) or less. 120Hz, 20C Rated voltage (V) 10 16 25 35 50 63 80 100 160 to 250 350 to 450 Tangent of loss angle (tan ) tan (MAX.) 0.20 0.16 0.14 0.12 0.10 0.10 0.08 0.08 0.20 0.24 For capacitance of more than 1000F, add 0.02 for every increase of 1000F. 120Hz Rated voltage (V) 10 16 25 35 50 63 80 100 160 to 250 350 to 450 Stability at Low Temperature Impedance ratio Z25C / Z+20C 3 2 2 2 2 2 2 2 3 6 (MAX.) Z40C / Z+20C 4 4 4 4 4 4 4 4 6 The specifications listed at right shall be met when the capacitors are restored to 20C after D.C. bias plus Within 30% of the initial capacitance value (10 to 100V) Capacitance change rated ripple current is applied for less than 50V (D = Within 20% of the initial capacitance value (160 to 450V) > 8 : 2000 hours, D = 10 : 5000 hours, D 12.5 : = Endurance 300% or less than the initial specified value (10 to 100V) 10000 hours), 63 to 100V (D = 8 : 2000 hours, D = tan 200% or less than the initial specified value (160 to 450V) > 10 : 3000 hours, D 12.5 : 5000 hours), more than = Leakage current Less than or equal to the initial specified value 160V (2000 hours) at 125C, the peak voltage shall not exceed the rated voltage. After storing the capacitors under no load at 125C for 1000 hours and then performing voltage treatment based on JIS C Shelf Life 5101-4 clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on blue sleeve. Radial Lead Type Type numbering system (Example : 10V 220 F) Sleeve (P.E.T) or Sleeve (polyolefin) d 1 2 3 4 5 6 7 8 9 10 11 12 U B T 1 A 2 2 1 M P D 8 Pressure relief vent +2 MAX. MIN MIN L 15 4 polyolefin sleeve product is also available upon request. Configuration Standard type Semi-standard type (mm) Pb-free leadwire Pb-free leadwire D D 8 10 12.5 16 18 Pb-free PET sleeve Pb-free Polyolefin sleeve P 3.5 5.0 5.0 7.5 7.5 8 ,10 PD8 PD d 0.6 0.6 0.6 0.8 0.8 12.5 to 18 HD8 HD 0.8 0.8 1.0 1.0 1.0 Please refer to page 20 about the end seal configuration. Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. 267 + MAX. D 0.5 PCode Code ALUMINUM ELECTROLYTIC CAPACITORS UBT Dimensions V (Code) 10 (1A) 16 (1C) 25 (1E) 35 (1V) 50 (1H) Case size Case size Case size Case size Case size Item Rated Rated Rated Rated Rated Impedance Impedance Impedance Impedance Impedance ripple ripple ripple ripple ripple D L D L D L D L D L () MAX. () MAX. () MAX. () MAX. () MAX. Cap (mArms) (mArms) (mArms) (mArms) (mArms) (mm) (mm) (mm) (mm) (mm) (F) 8 11.5 1.15 85 4.7 4R7 8 11.5 0.75 180 10 100 8 11.5 0.50 250 22 220 33 330 8 11.5 0.45 300 0.35 47 470 8 11.5 440 0.15 620 10 12.5 0.18 100 101 8 11.5 0.32 340 8 11.5 10 12.5 555 0.13 500 10 12.5 0.094 790 10 20 0.098 220 221 8 11.5 0.26 340 10 12.5 0.15 620 0.10 680 10 16 930 10 16 0.075 950 12.5 20 0.070 330 331 10 12.5 0.15 620 10 12.5 0.10 680 0.075 945 10 20 1330 10 20 0.058 1330 12.5 25 0.055 1650 470 471 10 12.5 0.10 680 10 16 0.075 945 0.057 1100 12.5 20 12.5 25 0.031 2010 16 31.5 0.031 2430 1000 102 10 20 0.057 1100 12.5 20 0.042 1490 0.033 1750 16 25 16 31.5 0.025 2790 2200 222 12.5 25 0.033 1750 16 25 0.024 2300 0.020 2710 18 35.5 18 31.5 3300 332 16 25 0.024 2300 16 31.5 0.020 2710 0.017 3310 4700 472 16 31.5 0.020 2710 18 31.5 0.018 3270 V(Code) 63 (1J) 80 (1K) 100 (2A) Case size Case size Case size Item Rated Rated Rated Impedance Impedance Impedance ripple ripple ripple D L D L D L Cap () MAX. () MAX. () MAX. (mArms) (mArms) (mArms) (mm) (mm) (mm) (F) 10 100 8 11.5 1.50 150 22 220 2.00 130 0.80 480 8 11.5 8 11.5 1.50 150 10 12.5 33 330 1.50 150 0.80 480 8 11.5 10 12.5 0.80 480 10 12.5 47 470 0.59 530 0.80 480 0.55 630 10 12.5 10 12.5 10 16 100 101 0.41 690 0.39 790 0.25 990 10 16 10 20 12.5 20 220 221 0.16 1050 0.18 1240 16 25 0.11 1500 12.5 20 1 2.5 25 330 331 0.12 1290 0.16 1390 16 31.5 0.079 1790 12.5 25 1 2.5 31.5 470 471 1460 0.097 0.11 1500 1 2.5 31.5 16 25 Rated ripple current (mArms) at 125C 100kHz Impedance () MAX. at 20C 100kHz Frequency coefficient of rated ripple current Frequency V CV 120Hz 300Hz 1kHz 10kHz or more 1000 > CV 0.50 0.64 0.83 1.00 10 to 100 1000 CV 0.67 0.79 0.91 1.00 V(Code) 160 (2C) 200 (2D) 250 (2E) 350 (2V) 400 (2G) 450 (2W) Item Case size Case size Case size Case size Case size Case size Rated Rated Rated Rated Rated Rated ripple ripple ripple ripple ripple ripple Cap. D L D L D L D L D L D L (mArms) (mArms) (mArms) (mArms) (mArms) (mArms) (F) Code (mm) (mm) (mm) (mm) (mm) (mm) 4.7 4R7 10 20 153 10 20 153 10 25 158 178 10 100 10 20 178 10 25 185 10 25 186 12.5 20 186 10 20 126 22 220 10 20 115 10 25 12.5 20 128 12.5 25 139 12.5 31.5 142 16 25 154 157 33 330 10 25 154 12.5 20 12.5 25 171 16 25 189 16 25 189 16 31.5 203 204 47 470 12.5 20 187 12.5 25 16 25 225 16 31.5 243 16 31.5 243 250 68 680 12.5 25 245 16 20 16 31.5 292 16 25 329 100 101 16 25 329 150 151 16 31.5 434 Rated ripple current (mArms) at 125C 120Hz Frequency coefficient of rated ripple current Frequency V Cap. (F) 50Hz 120Hz 300Hz 1kHz 10kHz 100kHz or more 4.7 to 330 0.75 1.00 1.25 1.50 1.75 1.80 160 to 450 .47 to 150 0.80 1.00 1.15 1.30 1.40 1.50 268