ALUMINUM ELECTROLYTIC CAPACITORS Miniature Sized, High Ripple Current, Long Life UCA High ripple current and Long Life product withstanding load life of 12000 hours(10000 hours for D=10) at +105C. Suited for ballast application. Compliant to the RoHS directive (2011/65/EU). UCA Long Life UPT Smaller UCS Specifications Item Performance Characteristics Category Temperature Range 25 to +105C Rated Voltage Range 160 to 450V Rated Capacitance Range 6.8 to 220F Capacitance Tolerance 20% at 120Hz, 20C Leakage Current After 1 minute s application of rated voltage at 20C, leakage current is not more than 0.04CV+100 (A) Measurement frequency : 120Hz at 20C Tangent of loss angle (tan ) Rated voltage (V) 160 200 250 350 400 450 tan (MAX.) 0.15 0.15 0.15 0.20 0.20 0.20 Measurement frequency : 120Hz Rated voltage (V) 160 200 250 350 400 450 Stability at Low Temperature Impedance ratio ZT / Z20 (MAX.) Z25C / Z+20C 3 3 3 6 6 6 The specifications listed at right shall be met when the capacitors are restored to 20C after D.C. bias plus rated Capacitance change Within 20% of the initial capacitance value Endurance ripple current is applied for 12000 hours (10000 hours for tan 200% or less than the initial specified value Leakage current Less than or equal to the initial specified value D=10) at 105C, the peak voltage shall not exceed the rated voltage. After storing the capacitors under no load at 105C for 1000 hours and then performing voltage treatment based on JIS C Shelf Life 5101-4 clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on dark brown sleeve. Type numbering system (Example : 250V 100F) Radial Lead Type 1 2 3 4 5 6 7 8 9 10 11 12 U C A 2 E 1 0 1 M H D T d Sleeve (P.E.T.) Size code Configuration Capacitance tolerance (20%) Rated capacitance (100F) Rated voltage (250V) Series name Pressure relief vent + 1.5MAX. MIN MIN Type L 15 4 Configuration Pb-free leadwire D Pb-free PET sleeve 10 PD (mm) 12.5 to 18 HD D 10 12.5 16 18 P 5.0 5.0 7.5 7.5 d 0.6 0.6 0.8 0.8 Please refer to page 20 about the end seal configuration. Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. 248 +0.5MAX. D 0.5 PALUMINUM ELECTROLYTIC CAPACITORS UCA Dimensions V 160 200 250 350 400 450 Cap. 2C 2D 2E 2V 2G 2W (F) Code 6.8 6R8 10 16 220 10 16 220 10 20 150 10 100 10 16 250 10 16 250 10 20 300 10 20 280 10 20 280 12.5 20 320 12.5 20 430 16 25 560 22 220 10 20 500 10 20 500 12.5 20 600 12.5 20 350 16 20 600 18 20 560 16 25 640 16 31.5 700 33 330 10 20 565 12.5 20 600 12.5 20 630 16 20 600 18 20 640 18 25 700 12.5 25 720 16 25 700 16 31.5 840 47 470 12.5 20 725 12.5 20 780 18 31.5 900 16 20 750 18 20 750 18 25 840 12.5 25 950 12.5 25 950 16 25 1000 16 31.5 1100 68 680 18 31.5 1000 16 20 970 16 20 970 18 20 920 18 25 875 16 25 1280 16 25 1280 16 31.5 1400 100 101 18 20 1180 18 20 1180 18 25 1345 16 31.5 1360 16 31.5 1360 150 151 18 31.5 1500 18 25 1360 18 25 1360 16 31.5 1400 Case size 220 221 18 31.5 1700 D L (mm) 18 25 1400 : Rated ripple current (mArms) at 105C 100kHz : In this case, 6 will be put at 12th digit of type numbering system. Frequency coefficient of rated ripple current Frequency 50Hz 120Hz 1kHz 10kHz 100kHz or more Coefficient 0.40 0.50 0.80 0.90 1.00 249