UHV1C681MPD Nichicon

ALUMINUM ELECTROLYTIC CAPACITORS ALUMINUM ELECTROLYTIC CAPACITORS High Ripple Low Impedance Approved by Reliability Center for Electronic Component, Japan-Certification No. RCJ-03-23C UHV UHV Dimensions Lower impedance at high frequency range. Impedance Smaller case size and high ripple current. Leakage Current Rated Voltage Rated Rated Ripple MAX. Case Size Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). A V Capacitance tan mArms Part Number DLmm 20/ 10/ UHD at 20 after code F 105/100kHz 2 minutes 100kHz 100kHz Smaller 220 511 0.21 13.86 0.23 0.76 360 UHV0J221MDD 330 6.311 0.21 20.79 0.10 0.33 460 UHV0J331MED Long Life UHW UHV 470 6.311 0.21 29.61 0.10 0.33 550 UHV0J471MED Specifications 680 811.5 0.21 42.84 0.059 0.181 900 UHV0J681MPD ltem 820 811.5 0.21 51.66 0.059 0.181 990 UHV0J821MPD Performance Characteristics Category Temperature Range 40 to +105C 1000 1012.5 0.21 63 0.043 0.133 1250 UHV0J102MPD Rated Voltage Range 6.3 to 35V 1200 1012.5 0.21 75.6 0.043 0.133 1360 UHV0J122MPD Rated Capacitance Range 47 to 8200F 1200 815 0.21 75.6 0.046 0.143 1330 UHV0J122MPD6 Capacitance Tolerance 20% at 120Hz, 20C 1500 820 0.21 94.5 0.031 0.105 1550 UHV0J152MPD 6.3 Leakage Current After 2 minutes application of rated voltage at 20C, leakage current is not more than 0.01CV or 3 (A), whichever is greater. 1800 1016 0.21 113.4 0.030 0.095 1815 UHV0J182MPD 0J Rated voltage (V) 6.3 10 16 25 35 120Hz 20C 2200 1020 0.23 138.6 0.019 0.057 2160 UHV0J222MPD Tangent of loss angle (tan ) tan (MAX.) 0.21 0.18 0.15 0.13 0.11 2700 1025 0.23 170.1 0.017 0.051 2475 UHV0J272MPD For capacitance of more than 1000F, add 0.02 for every increase of 1000F. 3300 12.520 0.25 207.9 0.016 0.041 2500 UHV0J332MHD Rated voltage (V) 6.3 10 16 25 35 120Hz 3900 12.520 0.25 245.7 0.016 0.041 2725 UHV0J392MHD Stability at Low Temperature Z25C / Z+20C 2 2 2 2 2 Impedance ratio 4700 12.525 0.27 296.1 0.014 0.036 3190 UHV0J472MHD (MAX.) Z40C / Z+20C 3 3 3 3 3 5600 12.531.5 0.29 352.8 0.012 0.031 3795 UHV0J562MHD The specifications listed at right shall be met when the 6800 12.535.5 0.31 428.4 0.011 0.029 3925 UHV0J682MHD Within 25% of the initial capacitance value (6.3V 10V : 30%) Capacitance change capacitors are restored to 20C after D.C. bias plus 6800 1620 0.31 428.4 0.014 0.036 3575 UHV0J682MHD6 Endurance rated ripple current is applied for 6000 hours (5000 tan 200% or less than the initial specified value hours for D=5 and 6.3) at 105C, the peak voltage Leakage current Less than or equal to the initial specified value 8200 1625 0.35 516.6 0.012 0.033 3990 UHV0J822MHD shall not exceed the rated voltage. 150 511 0.18 15 0.23 0.76 360 UHV1A151MDD Marking Printed with white color letter on black sleeve. 220 6.311 0.18 22 0.10 0.33 450 UHV1A221MED 330 6.311 0.18 33 0.10 0.33 550 UHV1A331MED 470 811.5 0.18 47 0.059 0.181 820 UHV1A471MPD Radial Lead Type Type numbering system (Example : 25V 150 F) 680 811.5 0.18 68 0.059 0.181 990 UHV1A681MPD d 1 2 3 4 5 6 7 8 9 10 11 12 Sleeve (P.E.T.) U H V 1 E 1 5 1 M E D 820 1012.5 0.18 82 0.043 0.133 1250 UHV1A821MPD 1000 1012.5 0.18 100 0.043 0.133 1360 UHV1A102MPD 1000 815 0.18 100 0.046 0.143 1330 UHV1A102MPD6 1200 1016 0.18 120 0.030 0.095 1650 UHV1A122MPD 1500 1016 0.18 150 0.030 0.095 1815 UHV1A152MPD Pressure 10 MIN MIN relief vent + MAX. 15 4 L (6.3up) 1A 1500 820 0.18 150 0.031 0.105 1550 UHV1A152MPD6 1800 1020 0.18 180 0.019 0.057 2160 UHV1A182MPD (mm) Configuration D 5 6.3 8 10 12.5 16 Pb-free leadwire 2200 1025 0.2 220 0.017 0.051 2475 UHV1A222MPD D (L < 20) 1.5 Pb-free PET sleeve P 2.0 2.5 3.5 5.0 5.0 7.5 (L 20) 2.0 5 DD 2700 12.520 0.2 270 0.016 0.041 2475 UHV1A272MHD d 0.5 0.5 0.6 0.6 0.6 0.8 6.3 ED 3300 12.520 0.22 330 0.016 0.041 2725 UHV1A332MHD 8 10 PD 12.5 16 HD 3900 12.525 0.22 390 0.014 0.036 3190 UHV1A392MHD Please refer to the Guidelines for Aluminum Electrolytic Capacitors for end seal configuration information. 4700 12.531.5 0.24 470 0.012 0.031 3795 UHV1A472MHD 4700 1620 0.24 470 0.014 0.036 3575 UHV1A472MHD6 Frequency coefficient of rated ripple current 5600 12.535.5 0.26 560 0.011 0.029 3975 UHV1A562MHD Frequency 120Hz 1kHz 10kHz 100kHz or more Cap. (F) 47 to 150 0.40 0.75 0.90 1.00 6800 1625 0.28 680 0.012 0.033 3990 UHV1A682MHD 0.50 0.85 0.94 1.00 220 to 560 For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit). 680 to 1800 0.60 0.87 0.95 1.00 If there is no size code in the part number, please add size code 1 and then add the appropriate code. 0.75 0.90 0.95 1.00 2200 to 3900 4700 to 8200 0.85 0.95 0.98 1.00 Dimension table in next page. CAT.8100K + 0.5 MAX. D 0.5 PALUMINUM ELECTROLYTIC CAPACITORS ALUMINUM ELECTROLYTIC CAPACITORS High Ripple Low Impedance Approved by Reliability Center for Electronic Component, Japan-Certification No. RCJ-03-23C UHV UHV Dimensions Lower impedance at high frequency range. Impedance Smaller case size and high ripple current. Leakage Current Rated Voltage Rated Rated Ripple MAX. Case Size Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). A V Capacitance tan mArms Part Number DLmm 20/ 10/ UHD at 20 after code F 105/100kHz 2 minutes 100kHz 100kHz Smaller 220 511 0.21 13.86 0.23 0.76 360 UHV0J221MDD 330 6.311 0.21 20.79 0.10 0.33 460 UHV0J331MED Long Life UHW UHV 470 6.311 0.21 29.61 0.10 0.33 550 UHV0J471MED Specifications 680 811.5 0.21 42.84 0.059 0.181 900 UHV0J681MPD ltem 820 811.5 0.21 51.66 0.059 0.181 990 UHV0J821MPD Performance Characteristics Category Temperature Range 40 to +105C 1000 1012.5 0.21 63 0.043 0.133 1250 UHV0J102MPD Rated Voltage Range 6.3 to 35V 1200 1012.5 0.21 75.6 0.043 0.133 1360 UHV0J122MPD Rated Capacitance Range 47 to 8200F 1200 815 0.21 75.6 0.046 0.143 1330 UHV0J122MPD6 Capacitance Tolerance 20% at 120Hz, 20C 1500 820 0.21 94.5 0.031 0.105 1550 UHV0J152MPD 6.3 Leakage Current After 2 minutes application of rated voltage at 20C, leakage current is not more than 0.01CV or 3 (A), whichever is greater. 1800 1016 0.21 113.4 0.030 0.095 1815 UHV0J182MPD 0J Rated voltage (V) 6.3 10 16 25 35 120Hz 20C 2200 1020 0.23 138.6 0.019 0.057 2160 UHV0J222MPD Tangent of loss angle (tan ) tan (MAX.) 0.21 0.18 0.15 0.13 0.11 2700 1025 0.23 170.1 0.017 0.051 2475 UHV0J272MPD For capacitance of more than 1000F, add 0.02 for every increase of 1000F. 3300 12.520 0.25 207.9 0.016 0.041 2500 UHV0J332MHD Rated voltage (V) 6.3 10 16 25 35 120Hz 3900 12.520 0.25 245.7 0.016 0.041 2725 UHV0J392MHD Stability at Low Temperature Z25C / Z+20C 2 2 2 2 2 Impedance ratio 4700 12.525 0.27 296.1 0.014 0.036 3190 UHV0J472MHD (MAX.) Z40C / Z+20C 3 3 3 3 3 5600 12.531.5 0.29 352.8 0.012 0.031 3795 UHV0J562MHD The specifications listed at right shall be met when the 6800 12.535.5 0.31 428.4 0.011 0.029 3925 UHV0J682MHD Within 25% of the initial capacitance value (6.3V 10V : 30%) Capacitance change capacitors are restored to 20C after D.C. bias plus 6800 1620 0.31 428.4 0.014 0.036 3575 UHV0J682MHD6 Endurance rated ripple current is applied for 6000 hours (5000 tan 200% or less than the initial specified value hours for D=5 and 6.3) at 105C, the peak voltage Leakage current Less than or equal to the initial specified value 8200 1625 0.35 516.6 0.012 0.033 3990 UHV0J822MHD shall not exceed the rated voltage. 150 511 0.18 15 0.23 0.76 360 UHV1A151MDD Marking Printed with white color letter on black sleeve. 220 6.311 0.18 22 0.10 0.33 450 UHV1A221MED 330 6.311 0.18 33 0.10 0.33 550 UHV1A331MED 470 811.5 0.18 47 0.059 0.181 820 UHV1A471MPD Radial Lead Type Type numbering system (Example : 25V 150 F) 680 811.5 0.18 68 0.059 0.181 990 UHV1A681MPD d 1 2 3 4 5 6 7 8 9 10 11 12 Sleeve (P.E.T.) U H V 1 E 1 5 1 M E D 820 1012.5 0.18 82 0.043 0.133 1250 UHV1A821MPD 1000 1012.5 0.18 100 0.043 0.133 1360 UHV1A102MPD 1000 815 0.18 100 0.046 0.143 1330 UHV1A102MPD6 1200 1016 0.18 120 0.030 0.095 1650 UHV1A122MPD 1500 1016 0.18 150 0.030 0.095 1815 UHV1A152MPD Pressure 10 MIN MIN relief vent + MAX. 15 4 L (6.3up) 1A 1500 820 0.18 150 0.031 0.105 1550 UHV1A152MPD6 1800 1020 0.18 180 0.019 0.057 2160 UHV1A182MPD (mm) Configuration D 5 6.3 8 10 12.5 16 Pb-free leadwire 2200 1025 0.2 220 0.017 0.051 2475 UHV1A222MPD D (L < 20) 1.5 Pb-free PET sleeve P 2.0 2.5 3.5 5.0 5.0 7.5 (L 20) 2.0 5 DD 2700 12.520 0.2 270 0.016 0.041 2475 UHV1A272MHD d 0.5 0.5 0.6 0.6 0.6 0.8 6.3 ED 3300 12.520 0.22 330 0.016 0.041 2725 UHV1A332MHD 8 10 PD 12.5 16 HD 3900 12.525 0.22 390 0.014 0.036 3190 UHV1A392MHD Please refer to the Guidelines for Aluminum Electrolytic Capacitors for end seal configuration information. 4700 12.531.5 0.24 470 0.012 0.031 3795 UHV1A472MHD 4700 1620 0.24 470 0.014 0.036 3575 UHV1A472MHD6 Frequency coefficient of rated ripple current 5600 12.535.5 0.26 560 0.011 0.029 3975 UHV1A562MHD Frequency 120Hz 1kHz 10kHz 100kHz or more Cap. (F) 47 to 150 0.40 0.75 0.90 1.00 6800 1625 0.28 680 0.012 0.033 3990 UHV1A682MHD 0.50 0.85 0.94 1.00 220 to 560 For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit). 680 to 1800 0.60 0.87 0.95 1.00 If there is no size code in the part number, please add size code 1 and then add the appropriate code. 0.75 0.90 0.95 1.00 2200 to 3900 4700 to 8200 0.85 0.95 0.98 1.00 Dimension table in next page. CAT.8100K + 0.5 MAX. D 0.5 P