ALUMINUM ELECTROLYTIC CAPACITORS ALUMINUM ELECTROLYTIC CAPACITORS Low Leakage Current UKL UKL Standard low leakage current series. Dimensions Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). Leakage Current Rated Voltage Rated Rated Ripple A Case Size V Capacitance tan mArms Part Number DLmm at 20 after at 20 after code F 85/120Hz 1 minute 2 minutes 470 1012.5 0.18 5.922 390 UKL0J471MPD Low Leakage UVR Current 680 1016 0.21 8.568 480 UKL0J681MPD UKL 1000 1020 0.21 12.6 650 UKL0J102MPD Specifications 1500 12.525 0.21 18.9 910 UKL0J152MHD 6.3 Item Performance Characteristics 2200 12.525 0.23 27.72 1060 UKL0J222MHD 0J Category Temperature Range 40 to +85C ( 40 to +105C product is also available upon request, but product rated at up to 50V less than or equal to 10 12.5 Lmm) 3300 1625 0.25 41.58 1270 UKL0J332MHD Rated Voltage Range 6.3 to 100V 4700 1631.5 0.27 59.22 1500 UKL0J472MHD Rated Capacitance Range 1.5 to 10000F 6800 1835.5 0.31 85.68 1760 UKL0J682MHD Capacitance Tolerance 20% (M), 10% (K) at 120Hz 20C 10000 1840 0.39 126 1900 UKL0J103MHD After 1 minute s (for case size 10 12.5 or smaller) or 2 minutes (for case size 10 16 or larger) application of rated voltage at 20C, Leakage Current leakage current is not more than 0.002CV or 0.2 (A) whichever is greater. 47 511 0.15 0.94 110 UKL1A470MDD 120Hz, 20C Rated voltage (V) 6.3 10 16 25 35 50 63 100 68 6.311 0.15 1.36 150 UKL1A680MED Less than 10 12.5 0.18 0.15 0.12 0.08 0.08 0.08 0.07 0.07 Tangent of loss angle (tan ) tan (MAX.) 100 6.311 0.15 2 180 UKL1A101MED 10 16 or more 0.21 0.17 0.14 0.12 0.12 0.10 0.08 0.08 150 811.5 0.15 3 250 UKL1A151MPD For capacitance of more than 1000F, add 0.02 for every increase of 1000F. 220 811.5 0.15 4.4 310 UKL1A221MPD 120Hz Rated voltage (V) 6.3 10 16 25 35 50 63 100 330 1012.5 0.15 6.6 400 UKL1A331MPD Impedance ratio Z25C / Z+20C 3 (4) 2 (3) 2 1.5 1.5 1.5 1.5 1.5 stability at Low Temperature Values in ( ) applicable to (MAX.) Z40C / Z+20C 5 (8) 4 (6) 3 (4) 2 (4) 2 (3) 2 (3) 2 (3) 2 (3) 10 16 or larger case size. 470 1016 0.17 9.4 530 UKL1A471MPD 10 1A 680 1020 0.17 13.6 600 UKL1A681MPD The specifications listed at right shall be met Capacitance change Within 15% of the initial capacitance value (6.3V : Within 20%) when the capacitors are restored to 20C 1000 12.520 0.17 20 810 UKL1A102MHD tan 150% or less than the initial specified value Endurance after the rated voltage is applied for 2000 Leakage current Less than or equal to the initial specified value 1500 12.525 0.17 30 1020 UKL1A152MHD hours at 85C, or 1000 hours at 105C. 2200 1625 0.19 44 1200 UKL1A222MHD After storing the capacitors under no load at 85C for 1000 hours and then performing voltage treatment based on JIS C Shelf Life 5101-4 clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. 3300 1631.5 0.21 66 1420 UKL1A332MHD Marking Printed with white color letter on black sleeve. 4700 1635.5 0.23 94 1650 UKL1A472MHD 6800 1835.5 0.27 136 1890 UKL1A682MHD 10 511 0.12 0.32 55 UKL1C100MDD Radial Lead Type Type numbering system (Example : 10V 47 F) 15 511 0.12 0.48 70 UKL1C150MDD 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Sleeve (P.E.T.) 22 511 0.12 0.704 85 UKL1C220MDD d U K L 1 A 4 7 0 M D D A N A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Sleeve (P.E.T.) 33 511 0.12 1.056 100 UKL1C330MDD d 2 U K L 1 A 4 7 0 M D D A N A 47 6.311 0.12 1.504 140 UKL1C470MED Configuration 1 2 Capacitance tolerance 68 6.311 0.12 2.176 160 UKL1C680MED (M : 20%, K : 10%) 1 Configuration Capacitance tolerance Rated capacitance (47F) 100 811.5 0.12 3.2 230 UKL1C101MPD (M : 20%, K : 10%) Rated voltage (10V) Rated capacitance (47F) Pressure 150 811.5 0.12 4.8 280 UKL1C151MPD Series name relief vent Rated voltage (10V) 16 (6.3up ) Type 220 1012.5 0.12 7.04 370 UKL1C221MPD + MAX. MIN MIN Series name Pressure L 15 4 1C relief vent 2 In case 105C unit is requiredType 330 1016 0.14 10.56 420 UKL1C331MPD + MAX. MIN MIN L 15 4 1 Configuration (6.3up ) (mm) 2 In case 105C unit is required 470 1020 0.14 15.04 550 UKL1C471MPD Pb-free leadwire 1 D 5 6.3 8 10 12.5 16 18 Configuration D 8 D Pb-free PET sleeve (mm) D 8 680 12.520 0.14 21.76 730 UKL1C681MHD P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 5 Pb-free leadwireDD (10 12.5 or smaller) 1.0 D 5 6.3 8 10 12.5 16 18 D Pb-free PET sleeve 6.3 ED (10 16 or or greater) d 1.5 0.5 0.5 0.6 0.6 0.6 0.8 0.8 1000 12.525 0.14 32 910 UKL1C102MHD P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 5 DD 8 10 PD 6.3 ED d 0.5 0.5 0.6 0.6 0.6 0.8 0.8 1500 1625 0.14 48 1150 UKL1C152MHD 12.5 to 18 HD 8 10 PD Please refer to the Guidelines for Aluminum Electrolytic Capacitors 2200 1625 0.16 70.4 1300 UKL1C222MHD 12.5 to 18 HD for end seal configuration information. 3300 1635.5 0.18 105.6 1550 UKL1C332MHD 4700 1835.5 0.20 150.4 1820 UKL1C472MHD Frequency coefficient of rated ripple current 4.7 511 0.08 0.235 45 UKL1E4R7MDD Frequency Cap.(F) 50Hz 120Hz 300Hz 1kHz 10kHz or more 6.8 511 0.08 0.34 55 UKL1E6R8MDD 1.5 to 68 0.75 1.00 1.35 1.57 2.00 100 to 680 0.80 1.23 1.34 1.50 1.00 10 511 0.08 0.5 70 UKL1E100MDD 25 1000 to 10000 0.85 1.10 1.13 1.15 1.00 1E 15 511 0.08 0.75 85 UKL1E150MDD 22 511 0.08 1.1 100 UKL1E220MDD 33 6.311 0.08 1.65 140 UKL1E330MED For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit). If there is no size code in the part number, please add size code 1 and then add the appropriate code. Dimension table in next page. CAT.8100K +0.5MAX. D +0.5MAX. D 0.5 P 0.5 PALUMINUM ELECTROLYTIC CAPACITORS ALUMINUM ELECTROLYTIC CAPACITORS Low Leakage Current UKL UKL Standard low leakage current series. Dimensions Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). Leakage Current Rated Voltage Rated Rated Ripple A Case Size V Capacitance tan mArms Part Number DLmm at 20 after at 20 after code F 85/120Hz 1 minute 2 minutes 470 1012.5 0.18 5.922 390 UKL0J471MPD Low Leakage UVR Current 680 1016 0.21 8.568 480 UKL0J681MPD UKL 1000 1020 0.21 12.6 650 UKL0J102MPD Specifications 1500 12.525 0.21 18.9 910 UKL0J152MHD 6.3 Item Performance Characteristics 2200 12.525 0.23 27.72 1060 UKL0J222MHD 0J Category Temperature Range 40 to +85C ( 40 to +105C product is also available upon request, but product rated at up to 50V less than or equal to 10 12.5 Lmm) 3300 1625 0.25 41.58 1270 UKL0J332MHD Rated Voltage Range 6.3 to 100V 4700 1631.5 0.27 59.22 1500 UKL0J472MHD Rated Capacitance Range 1.5 to 10000F 6800 1835.5 0.31 85.68 1760 UKL0J682MHD Capacitance Tolerance 20% (M), 10% (K) at 120Hz 20C 10000 1840 0.39 126 1900 UKL0J103MHD After 1 minute s (for case size 10 12.5 or smaller) or 2 minutes (for case size 10 16 or larger) application of rated voltage at 20C, Leakage Current leakage current is not more than 0.002CV or 0.2 (A) whichever is greater. 47 511 0.15 0.94 110 UKL1A470MDD 120Hz, 20C Rated voltage (V) 6.3 10 16 25 35 50 63 100 68 6.311 0.15 1.36 150 UKL1A680MED Less than 10 12.5 0.18 0.15 0.12 0.08 0.08 0.08 0.07 0.07 Tangent of loss angle (tan ) tan (MAX.) 100 6.311 0.15 2 180 UKL1A101MED 10 16 or more 0.21 0.17 0.14 0.12 0.12 0.10 0.08 0.08 150 811.5 0.15 3 250 UKL1A151MPD For capacitance of more than 1000F, add 0.02 for every increase of 1000F. 220 811.5 0.15 4.4 310 UKL1A221MPD 120Hz Rated voltage (V) 6.3 10 16 25 35 50 63 100 330 1012.5 0.15 6.6 400 UKL1A331MPD Impedance ratio Z25C / Z+20C 3 (4) 2 (3) 2 1.5 1.5 1.5 1.5 1.5 stability at Low Temperature Values in ( ) applicable to (MAX.) Z40C / Z+20C 5 (8) 4 (6) 3 (4) 2 (4) 2 (3) 2 (3) 2 (3) 2 (3) 10 16 or larger case size. 470 1016 0.17 9.4 530 UKL1A471MPD 10 1A 680 1020 0.17 13.6 600 UKL1A681MPD The specifications listed at right shall be met Capacitance change Within 15% of the initial capacitance value (6.3V : Within 20%) when the capacitors are restored to 20C 1000 12.520 0.17 20 810 UKL1A102MHD tan 150% or less than the initial specified value Endurance after the rated voltage is applied for 2000 Leakage current Less than or equal to the initial specified value 1500 12.525 0.17 30 1020 UKL1A152MHD hours at 85C, or 1000 hours at 105C. 2200 1625 0.19 44 1200 UKL1A222MHD After storing the capacitors under no load at 85C for 1000 hours and then performing voltage treatment based on JIS C Shelf Life 5101-4 clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. 3300 1631.5 0.21 66 1420 UKL1A332MHD Marking Printed with white color letter on black sleeve. 4700 1635.5 0.23 94 1650 UKL1A472MHD 6800 1835.5 0.27 136 1890 UKL1A682MHD 10 511 0.12 0.32 55 UKL1C100MDD Radial Lead Type Type numbering system (Example : 10V 47 F) 15 511 0.12 0.48 70 UKL1C150MDD 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Sleeve (P.E.T.) 22 511 0.12 0.704 85 UKL1C220MDD d U K L 1 A 4 7 0 M D D A N A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Sleeve (P.E.T.) 33 511 0.12 1.056 100 UKL1C330MDD d 2 U K L 1 A 4 7 0 M D D A N A 47 6.311 0.12 1.504 140 UKL1C470MED Configuration 1 2 Capacitance tolerance 68 6.311 0.12 2.176 160 UKL1C680MED (M : 20%, K : 10%) 1 Configuration Capacitance tolerance Rated capacitance (47F) 100 811.5 0.12 3.2 230 UKL1C101MPD (M : 20%, K : 10%) Rated voltage (10V) Rated capacitance (47F) Pressure 150 811.5 0.12 4.8 280 UKL1C151MPD Series name relief vent Rated voltage (10V) 16 (6.3up ) Type 220 1012.5 0.12 7.04 370 UKL1C221MPD + MAX. MIN MIN Series name Pressure L 15 4 1C relief vent 2 In case 105C unit is requiredType 330 1016 0.14 10.56 420 UKL1C331MPD + MAX. MIN MIN L 15 4 1 Configuration (6.3up ) (mm) 2 In case 105C unit is required 470 1020 0.14 15.04 550 UKL1C471MPD Pb-free leadwire 1 D 5 6.3 8 10 12.5 16 18 Configuration D 8 D Pb-free PET sleeve (mm) D 8 680 12.520 0.14 21.76 730 UKL1C681MHD P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 5 Pb-free leadwireDD (10 12.5 or smaller) 1.0 D 5 6.3 8 10 12.5 16 18 D Pb-free PET sleeve 6.3 ED (10 16 or or greater) d 1.5 0.5 0.5 0.6 0.6 0.6 0.8 0.8 1000 12.525 0.14 32 910 UKL1C102MHD P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 5 DD 8 10 PD 6.3 ED d 0.5 0.5 0.6 0.6 0.6 0.8 0.8 1500 1625 0.14 48 1150 UKL1C152MHD 12.5 to 18 HD 8 10 PD Please refer to the Guidelines for Aluminum Electrolytic Capacitors 2200 1625 0.16 70.4 1300 UKL1C222MHD 12.5 to 18 HD for end seal configuration information. 3300 1635.5 0.18 105.6 1550 UKL1C332MHD 4700 1835.5 0.20 150.4 1820 UKL1C472MHD Frequency coefficient of rated ripple current 4.7 511 0.08 0.235 45 UKL1E4R7MDD Frequency Cap.(F) 50Hz 120Hz 300Hz 1kHz 10kHz or more 6.8 511 0.08 0.34 55 UKL1E6R8MDD 1.5 to 68 0.75 1.00 1.35 1.57 2.00 100 to 680 0.80 1.23 1.34 1.50 1.00 10 511 0.08 0.5 70 UKL1E100MDD 25 1000 to 10000 0.85 1.10 1.13 1.15 1.00 1E 15 511 0.08 0.75 85 UKL1E150MDD 22 511 0.08 1.1 100 UKL1E220MDD 33 6.311 0.08 1.65 140 UKL1E330MED For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit). If there is no size code in the part number, please add size code 1 and then add the appropriate code. Dimension table in next page. CAT.8100K +0.5MAX. D +0.5MAX. D 0.5 P 0.5 P