ALUMINUM ELECTROLYTIC CAPACITORS ALUMINUM ELECTROLYTIC CAPACITORS For General Audio Equipment, Wide Temperature Range. UKT UKA UKT High Sound Quality 105 . Dimensions C standard for audio equipment Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). Leakage Current UKT AEC-Q200 compliant. Please contact us for details. Rated Voltage Rated Rated Ripple A Case Size V Capacitance tan mArms Part Number DLmm at 20 after at 20 after code F 105/120Hz High Sound 1 minute 2 minutes Quality 22 511 0.30 4.158 3 45 UKT0J220MDD UVZ Specifications 33 511 0.30 6.237 3 55 UKT0J330MDD 47 511 0.30 8.883 3 65 UKT0J470MDD Item Performance Characteristics Category Temperature Range 55 to +105C 100 511 0.30 18.9 6.3 95 UKT0J101MDD Rated Voltage Range 6.3 to 50V 220 6.311 0.30 41.58 13.86 160 UKT0J221MED Rated Capacitance Range 2.2 to 33000F 330 6.311 0.30 62.37 20.79 195 UKT0J331MED Capacitance Tolerance 20% at 120Hz, 20C 470 811.5 0.30 88.83 29.61 270 UKT0J471MPD After 1 minute s application of rated voltage at 20C, leakage current is not more than 0.03CV or 4 (A) , whichever is greater. Leakage Current After 2 minutes application of rated voltage at 20C, leakage current is not more than 0.01CV or 3 (A) , whichever is greater. 1000 1012.5 0.30 189 63 420 UKT0J102MPD 6.3 0J Rated voltage (V) Measurement frequency : 120Hz at 20C 2200 1020 0.32 415.8 138.6 710 UKT0J222MPD 6.3 10 16 25 35 50 Tangent of loss angle (tan ) tan (MAX.) 0.30 0.26 0.22 0.18 0.16 0.14 3300 12.520 0.34 623.7 207.9 910 UKT0J332MHD For capacitance of more than 1000 F, add 0.02 for every increase of 1000 F 4700 12.525 0.36 888.3 296.1 1120 UKT0J472MHD Rated voltage (V) 6.3 10 16 25 35 50 Measurement frequency : 120Hz 6800 12.535.5 0.40 1285.2 428.4 1360 UKT0J682MHD Z25C / Z+20C Stability at Low Temperature Impedance ratio 5 4 3 2 2 2 (MAX.) Z40C / Z+20C 10 8 6 4 3 3 10000 12.540 0.48 1890 630 1650 UKT0J103MHD 15000 1635.5 0.58 2835 945 2010 UKT0J153MHD Capacitance change Within 20% of the initial capacitance value The specifications listed at right shall be met when Endurance the capacitors are restored to 20C after the rated tan 200% or less than the initial specified value 22000 1840 0.72 4158 1386 2350 UKT0J223MHD voltage is applied for 1000 hours at 105C. Less than or equal to the initial specified value Leakage current 33000 2250 0.94 6237 2079 2800 UKT0J333MRD After storing the capacitors under no load at 105C tor 1000 hours and then performing voltage treatment based on JIS C 5101-4 Shelf Life clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. 22 511 0.26 6.6 3 45 UKT1A220MDD Marking Printed with black color letter on pearl blue sleeve. 33 511 0.26 9.9 3.3 58 UKT1A330MDD 47 511 0.26 14.1 4.7 68 UKT1A470MDD 100 511 0.26 30 10 105 UKT1A101MDD Radial Lead Type Type numbering system (Example : 16V 1000F) 220 6.311 0.26 66 22 175 UKT1A221MED Sleeve (P.E.T.) d d 1 2 3 4 5 6 7 8 9 10 11 Sleeve (P.E.T.) 1 2 3 4 5 6 7 8 9 10 11 330 811.5 0.26 99 33 240 UKT1A331MPD U K T 1 C 1 0 2 M P D U K T 1 C 1 0 2 M P D 470 811.5 0.26 141 47 280 UKT1A471MPD Configuration Configuration Capacitance tolerance (20%) Capacitance tolerance (20%) 1000 1016 0.26 300 100 500 UKT1A102MPD 10 Rated capacitance (1000F) Rated capacitance (1000F) 1A 2200 12.520 0.28 660 220 810 UKT1A222MHD Rated voltage (16V) Rated voltage (16V) 3300 12.525 0.30 990 330 1050 UKT1A332MHD Series name + MAX. MIN MIN Series name L + MAX. 15 MIN 4 MIN L 15 4 Type Type 4700 12.535.5 0.32 1410 470 1300 UKT1A472MHD Pressure Pressure relief vent relief vent (6.3up) Configuration Pb-free leadwire (6.3up) Configuration Pb-free leadwire 6800 12.540 0.36 2040 680 1570 UKT1A682MHD D D Pb-free PET sleeve Pb-free PET sleeve (mm) (mm) 5 DD 5 DD 10000 1635.5 0.44 3000 1000 1890 UKT1A103MHD D 5 6.3 8 10 12.5 16 18 20 22 25 D 5 6.3 8 10 12.5 16 18 20 22 25 6.3 ED 6.3 ED P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 10.0 10.0 12.5 P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 10.0 10.0 12.5 8 10 PD 15000 1840 0.54 4500 1500 2400 UKT1A153MHD 8 10 PD d 0.5 0.5 0.6 0.6 0.6 0.8 0.8 1.0 1.0 1.0 d 0.5 0.5 0.6 0.6 0.6 0.8 0.8 1.0 1.0 1.0 12.5 to 18 HD 12.5 to 18 HD 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 1.0 1.0 22000 2240 0.68 6600 2200 2650 UKT1A223MRD 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 1.0 1.0 20 to 25 RD 20 to 25 RD 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.0 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.0 33000 2550 0.90 9900 3300 2880 UKT1A333MRD In case L>25 for 12.5 (D) case sizes, In case L>25 for 12.5 (D) case sizes, lead diameter 0.8 (d) will be applied. lead diameter 0.8 (d) will be applied. 10 511 0.22 4.8 3 35 UKT1C100MDD 22 511 0.22 10.56 3.52 54 UKT1C220MDD Please refer to the Guidelines for Aluminum Electrolytic Capacitors for end seal configuration information. 33 511 0.22 15.84 5.28 65 UKT1C330MDD 47 511 0.22 22.56 7.52 79 UKT1C470MDD Frequency coefficient of rated ripple current 100 511 0.22 48 16 115 UKT1C101MDD Frequency 50Hz 120Hz 300Hz 1kHz 10kHz or more Cap.(F) 220 6.311 0.22 105.6 35.2 190 UKT1C221MED 0.75 1.00 1.35 1.57 2.00 2.2 to 47 0.80 1.00 1.23 1.34 1.50 100 to 470 330 811.5 0.22 158.4 52.8 265 UKT1C331MPD 0.85 1.00 1.10 1.13 1.15 1000 to 33000 470 811.5 0.22 225.6 75.2 315 UKT1C471MPD 16 1C 1000 1016 0.22 480 160 560 UKT1C102MPD 2200 12.520 0.24 1056 352 920 UKT1C222MHD 3300 12.531.5 0.26 1584 528 1270 UKT1C332MHD 4700 12.535.5 0.28 2256 752 1480 UKT1C472MHD 6800 1631.5 0.32 3264 1088 1780 UKT1C682MHD 10000 1835.5 0.40 4800 1600 2060 UKT1C103MHD 15000 2040 0.50 7200 2400 2430 UKT1C153MRD 22000 2250 0.64 10560 3520 3000 UKT1C223MRD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit). If there is no size code in the part number, please add size code 1 and then add the appropriate code. Dimension table in next page. CAT.8100K + MAX. D + MAX. D 0.5 P 0.5 PALUMINUM ELECTROLYTIC CAPACITORS ALUMINUM ELECTROLYTIC CAPACITORS For General Audio Equipment, Wide Temperature Range. UKT UKA UKT High Sound Quality 105 . Dimensions C standard for audio equipment Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). Leakage Current UKT AEC-Q200 compliant. Please contact us for details. Rated Voltage Rated Rated Ripple A Case Size V Capacitance tan mArms Part Number DLmm at 20 after at 20 after code F 105/120Hz High Sound 1 minute 2 minutes Quality 22 511 0.30 4.158 3 45 UKT0J220MDD UVZ Specifications 33 511 0.30 6.237 3 55 UKT0J330MDD 47 511 0.30 8.883 3 65 UKT0J470MDD Item Performance Characteristics Category Temperature Range 55 to +105C 100 511 0.30 18.9 6.3 95 UKT0J101MDD Rated Voltage Range 6.3 to 50V 220 6.311 0.30 41.58 13.86 160 UKT0J221MED Rated Capacitance Range 2.2 to 33000F 330 6.311 0.30 62.37 20.79 195 UKT0J331MED Capacitance Tolerance 20% at 120Hz, 20C 470 811.5 0.30 88.83 29.61 270 UKT0J471MPD After 1 minute s application of rated voltage at 20C, leakage current is not more than 0.03CV or 4 (A) , whichever is greater. Leakage Current After 2 minutes application of rated voltage at 20C, leakage current is not more than 0.01CV or 3 (A) , whichever is greater. 1000 1012.5 0.30 189 63 420 UKT0J102MPD 6.3 0J Rated voltage (V) Measurement frequency : 120Hz at 20C 2200 1020 0.32 415.8 138.6 710 UKT0J222MPD 6.3 10 16 25 35 50 Tangent of loss angle (tan ) tan (MAX.) 0.30 0.26 0.22 0.18 0.16 0.14 3300 12.520 0.34 623.7 207.9 910 UKT0J332MHD For capacitance of more than 1000 F, add 0.02 for every increase of 1000 F 4700 12.525 0.36 888.3 296.1 1120 UKT0J472MHD Rated voltage (V) 6.3 10 16 25 35 50 Measurement frequency : 120Hz 6800 12.535.5 0.40 1285.2 428.4 1360 UKT0J682MHD Z25C / Z+20C Stability at Low Temperature Impedance ratio 5 4 3 2 2 2 (MAX.) Z40C / Z+20C 10 8 6 4 3 3 10000 12.540 0.48 1890 630 1650 UKT0J103MHD 15000 1635.5 0.58 2835 945 2010 UKT0J153MHD Capacitance change Within 20% of the initial capacitance value The specifications listed at right shall be met when Endurance the capacitors are restored to 20C after the rated tan 200% or less than the initial specified value 22000 1840 0.72 4158 1386 2350 UKT0J223MHD voltage is applied for 1000 hours at 105C. Less than or equal to the initial specified value Leakage current 33000 2250 0.94 6237 2079 2800 UKT0J333MRD After storing the capacitors under no load at 105C tor 1000 hours and then performing voltage treatment based on JIS C 5101-4 Shelf Life clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. 22 511 0.26 6.6 3 45 UKT1A220MDD Marking Printed with black color letter on pearl blue sleeve. 33 511 0.26 9.9 3.3 58 UKT1A330MDD 47 511 0.26 14.1 4.7 68 UKT1A470MDD 100 511 0.26 30 10 105 UKT1A101MDD Radial Lead Type Type numbering system (Example : 16V 1000F) 220 6.311 0.26 66 22 175 UKT1A221MED Sleeve (P.E.T.) d d 1 2 3 4 5 6 7 8 9 10 11 Sleeve (P.E.T.) 1 2 3 4 5 6 7 8 9 10 11 330 811.5 0.26 99 33 240 UKT1A331MPD U K T 1 C 1 0 2 M P D U K T 1 C 1 0 2 M P D 470 811.5 0.26 141 47 280 UKT1A471MPD Configuration Configuration Capacitance tolerance (20%) Capacitance tolerance (20%) 1000 1016 0.26 300 100 500 UKT1A102MPD 10 Rated capacitance (1000F) Rated capacitance (1000F) 1A 2200 12.520 0.28 660 220 810 UKT1A222MHD Rated voltage (16V) Rated voltage (16V) 3300 12.525 0.30 990 330 1050 UKT1A332MHD Series name + MAX. MIN MIN Series name L + MAX. 15 MIN 4 MIN L 15 4 Type Type 4700 12.535.5 0.32 1410 470 1300 UKT1A472MHD Pressure Pressure relief vent relief vent (6.3up) Configuration Pb-free leadwire (6.3up) Configuration Pb-free leadwire 6800 12.540 0.36 2040 680 1570 UKT1A682MHD D D Pb-free PET sleeve Pb-free PET sleeve (mm) (mm) 5 DD 5 DD 10000 1635.5 0.44 3000 1000 1890 UKT1A103MHD D 5 6.3 8 10 12.5 16 18 20 22 25 D 5 6.3 8 10 12.5 16 18 20 22 25 6.3 ED 6.3 ED P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 10.0 10.0 12.5 P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 10.0 10.0 12.5 8 10 PD 15000 1840 0.54 4500 1500 2400 UKT1A153MHD 8 10 PD d 0.5 0.5 0.6 0.6 0.6 0.8 0.8 1.0 1.0 1.0 d 0.5 0.5 0.6 0.6 0.6 0.8 0.8 1.0 1.0 1.0 12.5 to 18 HD 12.5 to 18 HD 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 1.0 1.0 22000 2240 0.68 6600 2200 2650 UKT1A223MRD 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 1.0 1.0 20 to 25 RD 20 to 25 RD 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.0 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.0 33000 2550 0.90 9900 3300 2880 UKT1A333MRD In case L>25 for 12.5 (D) case sizes, In case L>25 for 12.5 (D) case sizes, lead diameter 0.8 (d) will be applied. lead diameter 0.8 (d) will be applied. 10 511 0.22 4.8 3 35 UKT1C100MDD 22 511 0.22 10.56 3.52 54 UKT1C220MDD Please refer to the Guidelines for Aluminum Electrolytic Capacitors for end seal configuration information. 33 511 0.22 15.84 5.28 65 UKT1C330MDD 47 511 0.22 22.56 7.52 79 UKT1C470MDD Frequency coefficient of rated ripple current 100 511 0.22 48 16 115 UKT1C101MDD Frequency 50Hz 120Hz 300Hz 1kHz 10kHz or more Cap.(F) 220 6.311 0.22 105.6 35.2 190 UKT1C221MED 0.75 1.00 1.35 1.57 2.00 2.2 to 47 0.80 1.00 1.23 1.34 1.50 100 to 470 330 811.5 0.22 158.4 52.8 265 UKT1C331MPD 0.85 1.00 1.10 1.13 1.15 1000 to 33000 470 811.5 0.22 225.6 75.2 315 UKT1C471MPD 16 1C 1000 1016 0.22 480 160 560 UKT1C102MPD 2200 12.520 0.24 1056 352 920 UKT1C222MHD 3300 12.531.5 0.26 1584 528 1270 UKT1C332MHD 4700 12.535.5 0.28 2256 752 1480 UKT1C472MHD 6800 1631.5 0.32 3264 1088 1780 UKT1C682MHD 10000 1835.5 0.40 4800 1600 2060 UKT1C103MHD 15000 2040 0.50 7200 2400 2430 UKT1C153MRD 22000 2250 0.64 10560 3520 3000 UKT1C223MRD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit). If there is no size code in the part number, please add size code 1 and then add the appropriate code. Dimension table in next page. CAT.8100K + MAX. D + MAX. D 0.5 P 0.5 P