ALUMINUM ELECTROLYTIC CAPACITORS ALUMINUM ELECTROLYTIC CAPACITORS Miniature Sized, Low lmpedance, High Reliability For UPA Switching Power Supplies UPA Dimensions Lower impedance than UPW. Impedance Smaller case size and high ripple current. Leakage Current Rated Voltage Rated Rated Ripple MAX. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). Case Size A V Capacitance tan mArms Part Number DLmm at 20 after 20/ 10/ code F 105/100kHz 1 minute 100kHz 100kHz 560 811.5 0.22 105.84 0.090 0.18 630 UPA0561MPD Low UPW UPA Impedance 680 811.5 0.22 128.52 0.090 0.18 630 UPA0681MPD 1000 815 0.22 189 0.062 0.124 860 UPA0102MPD Specifications 1000 1012.5 0.22 189 0.063 0.126 900 UPA0102MPD6 ltem Performance Characteristics 1200 1012.5 0.22 226.8 0.063 0.126 900 UPA0122MPD Category Temperature Range 55 to +105C 1200 1016 0.22 226.8 0.049 0.098 1240 UPA0122MPD3 Rated Voltage Range 6.3 to 35V 1500 820 0.22 283.5 0.044 0.088 1220 UPA0152MPD Rated Capacitance Range 180 to 10000F 1500 1016 0.22 283.5 0.049 0.098 1240 UPA0152MPD6 Capacitance Tolerance 20% at 120Hz, 20C 1500 1020 0.22 283.5 0.035 0.070 1490 UPA0152MPD3 Leakage Current After 1 minute s application of rated voltage at 20C, leakage current is not more than 0.03CV or 4 (A), whichever is greater. 2200 1020 0.24 415.8 0.035 0.070 1490 UPA0222MPD Rated voltage (V) 6.3 10 16 25 35 120Hz 20C 2200 1025 0.24 415.8 0.033 0.066 1680 UPA0222MPD3 6.3 Tangent of loss angle (tan ) 0 tan (MAX.) 0.22 0.19 0.16 0.14 0.12 2700 1025 0.24 510.3 0.033 0.066 1680 UPA0272MPD For capacitance of more than 1000F, add 0.02 for every increase of 1000F. 3300 12.520 0.26 623.7 0.029 0.058 1890 UPA0332MHD Rated voltage (V) 6.3 10 16 25 35 120Hz 3900 12.525 0.26 737.1 0.022 0.044 2280 UPA0392MHD Stability at Low Temperature Impedance ratio (MAX.) Z55C / Z+20C 3 3 3 3 3 4700 12.525 0.28 888.3 0.022 0.044 2280 UPA0472MHD 5600 12.531.5 0.30 1058.4 0.018 0.036 2720 UPA0562MHD The specifications listed below shall be met when the D(mm) > 8 10 12.5 = Rated Voltage capacitors are restored to 20C after D.C. bias plus rated 5600 1620 0.30 1058.4 0.026 0.052 2330 UPA0562MHD6 ripple current is applied at 105C for the condition listed at 6.3 35V 3000h 4000h 5000h 6800 12.535.5 0.32 1285.2 0.016 0.032 2940 UPA0682MHD right.The peak voltage shall not exceed the rated voltage. Endurance h = hours 8200 1625 0.36 1549.8 0.019 0.038 2760 UPA0822MHD Capacitance change Within 20% of the initial capacitance value(6.3V, 10V : 30%) 8200 1820 0.36 1549.8 0.025 0.050 2640 UPA0822MHD6 tan 200% or less than the initial specified value(6.3V, 10V : 300%) Leakage current Less than or equal to the initial specified value 10000 1631.5 0.40 1890 0.017 0.034 2810 UPA0103MHD After storing the capacitors under no load at 105C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 10000 1825 0.40 1890 0.018 0.036 2850 UPA0103MHD6 Shelf Life clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. 470 811.5 0.19 141 0.090 0.18 630 UPA1A471MPD Marking Printed with white color letter on dark brown sleeve. 560 811.5 0.19 168 0.090 0.18 630 UPA1A561MPD 820 815 0.19 246 0.062 0.124 860 UPA1A821MPD 820 1012.5 0.19 246 0.063 0.126 900 UPA1A821MPD6 Radial Lead Type Type numbering system (Example : 10V 470F) 1000 820 0.19 300 0.044 0.088 1220 UPA1A102MPD ( ) d 1 2 3 4 5 6 7 8 9 10 11 12 Sleeve P.E.T. 1000 1012.5 0.19 300 0.063 0.126 900 UPA1A102MPD6 U P A 1 A 4 7 1 M P D 1000 1016 0.19 300 0.049 0.098 1240 UPA1A102MPD3 Size code 1200 820 0.19 360 0.044 0.088 1220 UPA1A122MPD Configuration 1200 1016 0.19 360 0.049 0.098 1240 UPA1A122MPD6 Capacitance tolerance ( 20%) 1500 1020 0.19 450 0.035 0.070 1490 UPA1A152MPD Rated capacitance (470F) + MAX. MIN MIN L 15 4 Rated voltage (10V) 1800 1020 0.19 540 0.035 0.070 1490 UPA1A182MPD Pressure relief vent 10 Series name 1800 1025 0.19 540 0.033 0.066 1680 UPA1A182MPD6 1A Type (mm) 2200 1025 0.21 660 0.033 0.066 1680 UPA1A222MPD (L < 20) 1.5 D 8 10 12.5 16 18 Configuration 2200 12.520 0.21 660 0.029 0.058 1890 UPA1A222MHD3 (L 20) 2.0 P 3.5 5.0 5.0 7.5 7.5 Pb-free leadwire D Pb-free PET sleeve d 0.6 0.6 0.6 0.8 0.8 2700 12.520 0.21 810 0.029 0.058 1890 UPA1A272MHD 8 10 PD 12.5 to 18 HD 3300 12.525 0.23 990 0.022 0.044 2280 UPA1A332MHD Please refer to page 18 about the end seal configuration. 3900 12.525 0.23 1170 0.022 0.044 2280 UPA1A392MHD 4700 12.531.5 0.25 1410 0.018 0.036 2720 UPA1A472MHD Frequency coefficient of rated ripple current 4700 1620 0.25 1410 0.026 0.052 2330 UPA1A472MHD6 Frequency Cap. (F) 50Hz 120Hz 300Hz 1kHz 10kHz or more 5600 12.535.5 0.27 1680 0.016 0.032 2940 UPA1A562MHD 180 to 330 0.55 0.65 0.75 0.85 1.00 6800 1625 0.29 2040 0.019 0.038 2760 UPA1A682MHD 390 to 1000 0.70 0.75 0.80 0.90 1.00 8200 1631.5 0.33 2460 0.017 0.034 2810 UPA1A822MHD 0.80 0.85 0.90 0.95 1.00 1200 to 10000 8200 1825 0.33 2460 0.018 0.036 2850 UPA1A822MHD6 For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit). If there is no size code in the part number, please add size code 1 and then add the appropriate code. Dimension table in next page. CAT.8100J CAT.8100J P.298 P.299 + 0.5MAX. D 0.5 PALUMINUM ELECTROLYTIC CAPACITORS ALUMINUM ELECTROLYTIC CAPACITORS Miniature Sized, Low lmpedance, High Reliability For UPA Switching Power Supplies UPA Dimensions Lower impedance than UPW. Impedance Smaller case size and high ripple current. Leakage Current Rated Voltage Rated Rated Ripple MAX. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). Case Size A V Capacitance tan mArms Part Number DLmm at 20 after 20/ 10/ code F 105/100kHz 1 minute 100kHz 100kHz 560 811.5 0.22 105.84 0.090 0.18 630 UPA0561MPD Low UPW UPA Impedance 680 811.5 0.22 128.52 0.090 0.18 630 UPA0681MPD 1000 815 0.22 189 0.062 0.124 860 UPA0102MPD Specifications 1000 1012.5 0.22 189 0.063 0.126 900 UPA0102MPD6 ltem Performance Characteristics 1200 1012.5 0.22 226.8 0.063 0.126 900 UPA0122MPD Category Temperature Range 55 to +105C 1200 1016 0.22 226.8 0.049 0.098 1240 UPA0122MPD3 Rated Voltage Range 6.3 to 35V 1500 820 0.22 283.5 0.044 0.088 1220 UPA0152MPD Rated Capacitance Range 180 to 10000F 1500 1016 0.22 283.5 0.049 0.098 1240 UPA0152MPD6 Capacitance Tolerance 20% at 120Hz, 20C 1500 1020 0.22 283.5 0.035 0.070 1490 UPA0152MPD3 Leakage Current After 1 minute s application of rated voltage at 20C, leakage current is not more than 0.03CV or 4 (A), whichever is greater. 2200 1020 0.24 415.8 0.035 0.070 1490 UPA0222MPD Rated voltage (V) 6.3 10 16 25 35 120Hz 20C 2200 1025 0.24 415.8 0.033 0.066 1680 UPA0222MPD3 6.3 Tangent of loss angle (tan ) 0 tan (MAX.) 0.22 0.19 0.16 0.14 0.12 2700 1025 0.24 510.3 0.033 0.066 1680 UPA0272MPD For capacitance of more than 1000F, add 0.02 for every increase of 1000F. 3300 12.520 0.26 623.7 0.029 0.058 1890 UPA0332MHD Rated voltage (V) 6.3 10 16 25 35 120Hz 3900 12.525 0.26 737.1 0.022 0.044 2280 UPA0392MHD Stability at Low Temperature Impedance ratio (MAX.) Z55C / Z+20C 3 3 3 3 3 4700 12.525 0.28 888.3 0.022 0.044 2280 UPA0472MHD 5600 12.531.5 0.30 1058.4 0.018 0.036 2720 UPA0562MHD The specifications listed below shall be met when the D(mm) > 8 10 12.5 = Rated Voltage capacitors are restored to 20C after D.C. bias plus rated 5600 1620 0.30 1058.4 0.026 0.052 2330 UPA0562MHD6 ripple current is applied at 105C for the condition listed at 6.3 35V 3000h 4000h 5000h 6800 12.535.5 0.32 1285.2 0.016 0.032 2940 UPA0682MHD right.The peak voltage shall not exceed the rated voltage. Endurance h = hours 8200 1625 0.36 1549.8 0.019 0.038 2760 UPA0822MHD Capacitance change Within 20% of the initial capacitance value(6.3V, 10V : 30%) 8200 1820 0.36 1549.8 0.025 0.050 2640 UPA0822MHD6 tan 200% or less than the initial specified value(6.3V, 10V : 300%) Leakage current Less than or equal to the initial specified value 10000 1631.5 0.40 1890 0.017 0.034 2810 UPA0103MHD After storing the capacitors under no load at 105C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 10000 1825 0.40 1890 0.018 0.036 2850 UPA0103MHD6 Shelf Life clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. 470 811.5 0.19 141 0.090 0.18 630 UPA1A471MPD Marking Printed with white color letter on dark brown sleeve. 560 811.5 0.19 168 0.090 0.18 630 UPA1A561MPD 820 815 0.19 246 0.062 0.124 860 UPA1A821MPD 820 1012.5 0.19 246 0.063 0.126 900 UPA1A821MPD6 Radial Lead Type Type numbering system (Example : 10V 470F) 1000 820 0.19 300 0.044 0.088 1220 UPA1A102MPD ( ) d 1 2 3 4 5 6 7 8 9 10 11 12 Sleeve P.E.T. 1000 1012.5 0.19 300 0.063 0.126 900 UPA1A102MPD6 U P A 1 A 4 7 1 M P D 1000 1016 0.19 300 0.049 0.098 1240 UPA1A102MPD3 Size code 1200 820 0.19 360 0.044 0.088 1220 UPA1A122MPD Configuration 1200 1016 0.19 360 0.049 0.098 1240 UPA1A122MPD6 Capacitance tolerance ( 20%) 1500 1020 0.19 450 0.035 0.070 1490 UPA1A152MPD Rated capacitance (470F) + MAX. MIN MIN L 15 4 Rated voltage (10V) 1800 1020 0.19 540 0.035 0.070 1490 UPA1A182MPD Pressure relief vent 10 Series name 1800 1025 0.19 540 0.033 0.066 1680 UPA1A182MPD6 1A Type (mm) 2200 1025 0.21 660 0.033 0.066 1680 UPA1A222MPD (L < 20) 1.5 D 8 10 12.5 16 18 Configuration 2200 12.520 0.21 660 0.029 0.058 1890 UPA1A222MHD3 (L 20) 2.0 P 3.5 5.0 5.0 7.5 7.5 Pb-free leadwire D Pb-free PET sleeve d 0.6 0.6 0.6 0.8 0.8 2700 12.520 0.21 810 0.029 0.058 1890 UPA1A272MHD 8 10 PD 12.5 to 18 HD 3300 12.525 0.23 990 0.022 0.044 2280 UPA1A332MHD Please refer to page 18 about the end seal configuration. 3900 12.525 0.23 1170 0.022 0.044 2280 UPA1A392MHD 4700 12.531.5 0.25 1410 0.018 0.036 2720 UPA1A472MHD Frequency coefficient of rated ripple current 4700 1620 0.25 1410 0.026 0.052 2330 UPA1A472MHD6 Frequency Cap. (F) 50Hz 120Hz 300Hz 1kHz 10kHz or more 5600 12.535.5 0.27 1680 0.016 0.032 2940 UPA1A562MHD 180 to 330 0.55 0.65 0.75 0.85 1.00 6800 1625 0.29 2040 0.019 0.038 2760 UPA1A682MHD 390 to 1000 0.70 0.75 0.80 0.90 1.00 8200 1631.5 0.33 2460 0.017 0.034 2810 UPA1A822MHD 0.80 0.85 0.90 0.95 1.00 1200 to 10000 8200 1825 0.33 2460 0.018 0.036 2850 UPA1A822MHD6 For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit). If there is no size code in the part number, please add size code 1 and then add the appropriate code. Dimension table in next page. CAT.8100J CAT.8100J P.298 P.299 + 0.5MAX. D 0.5 P