ALUMINUM ELECTROLYTIC CAPACITORS ALUMINUM ELECTROLYTIC CAPACITORS Low Impedance, High Reliability UPM UPM High reliability withstanding 5000 hour load life at +105C (3000/2000 hours for (Through 100V only) smaller case sizes as specified below). Dimensions Capacitance ranges available based on the numerical values in E12 series under JIS. UPM Impedance Rated Ripple Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). Leakage Current MAX. mArms Rated Voltage Rated AEC-Q200 compliant. Please contact us for details. Case Size A Smaller V Capacitance tan Part Number 105/ DLmm at 20 after 20/ 10/ 105/ code F 10 to 1 minute 100kHz 100kHz 120Hz UPW 200kHz Specifications 100 511 0.22 18.9 0.85 1.70 150 99 UPM0J101MDD Item Performance Characteristics 120 511 0.22 22.68 0.65 1.30 175 115 UPM0J121MDD Category Temperature Range 55 to +105C (6.3 to 100V), 40 to +105C (160 to 400V), 25 to +105C (450V) Rated Voltage Range 6.3 to 450V 150 6.311 0.22 28.35 0.49 0.98 225 155 UPM0J151MED Rated Capacitance Range 1 to 15000F 180 6.311 0.22 34.02 0.39 0.78 250 175 UPM0J181MED Capacitance Tolerance 20% at 120Hz, 20C 220 6.311 0.22 41.58 0.30 0.60 285 205 UPM0J221MED Rated Voltage (V) 6.3 to 100 160 to 450 Leakage Current After 1 minute s application of rated voltage at 20C, 270 6.315 0.22 51.03 0.24 0.48 370 275 UPM0J271MED After 1 minute s application of rated voltage at 20C, leakage current is < Leakage current CV 1000 : I = 0.1CV+40 (A) or less. = 330 6.315 0.22 62.37 0.20 0.40 405 310 UPM0J331MED not more than 0.03CV or 4 (A), whichever is greater. CV > 1000 : I = 0.04CV+100 (A) or less. 390 811.5 0.22 73.71 0.17 0.34 445 345 UPM0J391MPD For capacitance of more than 1000F, add 0.02 for every increase of 1000F. Measurement frequency : 120Hz at 20C 470 815 0.22 88.83 0.14 0.28 550 440 UPM0J471MPD Tangent of loss angle (tan ) Rated Voltage (V) 6.3 10 16 25 35 50 63 to 100 160 to 350 400 450 tan (MAX.) 0.22 0.19 0.16 0.14 0.12 0.10 0.08 0.20 0.25 470 1012.5 0.22 88.83 0.14 0.28 635 505 UPM0J471MPD6 560 815 0.22 105.84 0.12 0.24 595 485 UPM0J561MPD 120Hz Rated voltage (V) 6.3 10 16 25 35 50 to 100 160 200 250 315 350 400 450 560 1012.5 0.22 105.84 0.13 0.26 670 545 UPM0J561MPD6 Z25C / Z+20C 15 Stability at Low Temperature Impedance Z40C / Z+20C 4 6 8 10 680 820 0.22 128.52 0.10 0.20 730 605 UPM0J681MPD ratio (MAX.) Z55C / Z+20C 4 3 3 2 680 1016 0.22 128.52 0.11 0.22 825 685 UPM0J681MPD6 The specifications listed below shall be met when the capacitors 820 820 0.22 154.98 0.085 0.17 795 675 UPM0J821MPD D(mm) > 5, 6.3 8 10 = are restored to 20C after D.C. bias plus rated ripple current is Rated Voltage 820 1016 0.22 154.98 0.095 0.19 840 715 UPM0J821MPD6 applied at 105C for the condition listed at right.The peak voltage 6.3450V 2000hrs. 3000hrs. 5000hrs. 1000 1020 0.22 189 0.075 0.15 950 820 UPM0J102MPD shall not exceed the rated voltage. Endurance 1000 12.515 0.22 189 0.085 0.17 890 770 UPM0J102MHD6 Capacitance change Within 20% of the initial capacitance value 1200 1020 0.22 226.8 0.065 0.13 1060 930 UPM0J122MPD tan 200% or less than the initial specified value Leakage current Less than or equal to the initial specified value 1200 12.515 0.22 226.8 0.075 0.15 950 835 UPM0J122MHD6 1500 1025 0.22 283.5 0.055 0.11 1260 1130 UPM0J152MPD After storing the capacitors under no load at 105C Capacitance change Within 20% of the initial capacitance value for 1000 hours and then performing voltage treatment based 1500 12.515 0.22 283.5 0.065 0.13 1020 915 UPM0J152MHD6 6.3 Shelf Life tan 150% or less than the initial specified value on JIS C 5101-4 clause 4.1 at 20C, they shall meet the 0J 1800 1031.5 0.22 340.2 0.050 0.10 1370 1230 UPM0J182MPD Leakage current Less than or equal to the initial specified value characteristic requirements listed at right. 1800 1615 0.22 340.2 0.055 0.11 1270 1140 UPM0J182MHD6 Marking Printed with white color letter on dark brown sleeve. 2200 1031.5 0.24 415.8 0.043 0.086 1470 1320 UPM0J222MPD Radial Lead Type Frequency coefficient of rated ripple current 2200 1615 0.24 415.8 0.049 0.098 1340 1200 UPM0J222MHD6 d Sleeve (P.E.T.) 2700 12.525 0.24 510.3 0.038 0.076 1700 1530 UPM0J272MHD Rated voltage Frequency coefficient 15000 2700 1815 0.24 510.3 0.044 0.088 1500 1350 UPM0J272MHD6 10000 3300 12.525 0.26 623.7 0.034 0.068 1710 1530 UPM0J332MHD 6800 3300 1815 0.26 623.7 0.039 0.078 1600 1440 UPM0J332MHD6 4700 3300 3900 12.531.5 0.26 737.1 0.031 0.062 1980 1780 UPM0J392MHD Pressure 2200 relief vent MIN MIN 3900 1620 0.26 737.1 0.036 0.072 1770 1590 UPM0J392MHD6 + MAX. 15 4 L (6.3up) 1500 (mm) 4700 12.535.5 0.28 888.3 0.028 0.056 2230 2000 UPM0J472MHD 1000 (D < 10) 1.5 D 5 6.3 8 10 12.5 16 18 680 4700 1820 0.28 888.3 0.032 0.064 1920 1720 UPM0J472MHD6 > (D 10) 2.0 = P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 470 5600 12.540 0.30 1058.4 0.026 0.052 2460 2210 UPM0J562MHD d 0.5 0.5 0.6 0.6 0.6 0.8 0.8 330 6.3 to 100V 5600 1820 0.30 1058.4 0.030 0.060 1980 1780 UPM0J562MHD6 In case L > 25 for the 12.5 dia. unit, lead dia. d = 0.8mm. 220 (10kHz to 150 6800 1631.5 0.32 1285.2 0.024 0.048 2510 2250 UPM0J682MHD 200kHz=1) Please refer to the Guidelines for Aluminum Electrolytic Capacitors 100 6800 1825 0.32 1285.2 0.027 0.054 2350 2110 UPM0J682MHD6 for end seal configuration information. 68 8200 1635.5 0.36 1549.8 0.022 0.044 2770 2490 UPM0J822MHD 47 Type numbering system (Example : 25V 470F) 33 8200 1831.5 0.36 1549.8 0.025 0.050 2600 2340 UPM0J822MHD6 120Hz 300Hz 1kHz 1 2 3 4 5 6 7 8 9 10 11 12 22 10000 1640 0.40 1890 0.020 0.040 3110 2790 UPM0J103MHD U P M 1 E 4 7 1 M P D 15 Size code 10000 1831.5 0.40 1890 0.023 0.046 2720 2440 UPM0J103MHD6 10 2.2 Configuration Type Code 12000 1835.5 0.44 2268 0.019 0.038 3050 2740 UPM0J123MHD 00.5 0.60.7 0.80.9 1.0 Frequency coefficient Capacitance tolerance ( 20%) Small Dia 15000 1840 0.50 2835 0.018 0.036 3300 2970 UPM0J153MHD Low Profile 6 Rated capacitance (470F) 50Hz 120Hz 300Hz 1kHz 10kHz or more 68 511 0.19 20.4 0.80 1.60 155 97 UPM1A680MDD 160 to 450V 0.80 1.00 1.25 1.40 1.60 Rated voltage (25V) 82 511 0.19 24.6 0.65 1.30 175 110 UPM1A820MDD Series name 100 6.311 0.19 30 0.55 1.10 210 135 UPM1A101MED Type 10 120 6.311 0.19 36 0.44 0.88 235 160 UPM1A121MED 1A Configuration 150 6.311 0.19 45 0.35 0.70 265 185 UPM1A151MED Pb-free leadwire D Pb-free PET sleeve 180 6.311 0.19 54 0.29 0.58 290 205 UPM1A181MED 5 DD 220 6.315 0.19 66 0.24 0.48 370 270 UPM1A221MED 6.3 ED 8 10 PD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit). 12.5 to 18 HD If there is no size code in the part number, please add size code 1 and then add the appropriate code. Dimension table in next page. CAT.8100K +0.5 MAX. D 0.5 P Cap.(F)ALUMINUM ELECTROLYTIC CAPACITORS ALUMINUM ELECTROLYTIC CAPACITORS Low Impedance, High Reliability UPM UPM High reliability withstanding 5000 hour load life at +105C (3000/2000 hours for (Through 100V only) smaller case sizes as specified below). Dimensions Capacitance ranges available based on the numerical values in E12 series under JIS. UPM Impedance Rated Ripple Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). Leakage Current MAX. mArms Rated Voltage Rated AEC-Q200 compliant. Please contact us for details. Case Size A Smaller V Capacitance tan Part Number 105/ DLmm at 20 after 20/ 10/ 105/ code F 10 to 1 minute 100kHz 100kHz 120Hz UPW 200kHz Specifications 100 511 0.22 18.9 0.85 1.70 150 99 UPM0J101MDD Item Performance Characteristics 120 511 0.22 22.68 0.65 1.30 175 115 UPM0J121MDD Category Temperature Range 55 to +105C (6.3 to 100V), 40 to +105C (160 to 400V), 25 to +105C (450V) Rated Voltage Range 6.3 to 450V 150 6.311 0.22 28.35 0.49 0.98 225 155 UPM0J151MED Rated Capacitance Range 1 to 15000F 180 6.311 0.22 34.02 0.39 0.78 250 175 UPM0J181MED Capacitance Tolerance 20% at 120Hz, 20C 220 6.311 0.22 41.58 0.30 0.60 285 205 UPM0J221MED Rated Voltage (V) 6.3 to 100 160 to 450 Leakage Current After 1 minute s application of rated voltage at 20C, 270 6.315 0.22 51.03 0.24 0.48 370 275 UPM0J271MED After 1 minute s application of rated voltage at 20C, leakage current is < Leakage current CV 1000 : I = 0.1CV+40 (A) or less. = 330 6.315 0.22 62.37 0.20 0.40 405 310 UPM0J331MED not more than 0.03CV or 4 (A), whichever is greater. CV > 1000 : I = 0.04CV+100 (A) or less. 390 811.5 0.22 73.71 0.17 0.34 445 345 UPM0J391MPD For capacitance of more than 1000F, add 0.02 for every increase of 1000F. Measurement frequency : 120Hz at 20C 470 815 0.22 88.83 0.14 0.28 550 440 UPM0J471MPD Tangent of loss angle (tan ) Rated Voltage (V) 6.3 10 16 25 35 50 63 to 100 160 to 350 400 450 tan (MAX.) 0.22 0.19 0.16 0.14 0.12 0.10 0.08 0.20 0.25 470 1012.5 0.22 88.83 0.14 0.28 635 505 UPM0J471MPD6 560 815 0.22 105.84 0.12 0.24 595 485 UPM0J561MPD 120Hz Rated voltage (V) 6.3 10 16 25 35 50 to 100 160 200 250 315 350 400 450 560 1012.5 0.22 105.84 0.13 0.26 670 545 UPM0J561MPD6 Z25C / Z+20C 15 Stability at Low Temperature Impedance Z40C / Z+20C 4 6 8 10 680 820 0.22 128.52 0.10 0.20 730 605 UPM0J681MPD ratio (MAX.) Z55C / Z+20C 4 3 3 2 680 1016 0.22 128.52 0.11 0.22 825 685 UPM0J681MPD6 The specifications listed below shall be met when the capacitors 820 820 0.22 154.98 0.085 0.17 795 675 UPM0J821MPD D(mm) > 5, 6.3 8 10 = are restored to 20C after D.C. bias plus rated ripple current is Rated Voltage 820 1016 0.22 154.98 0.095 0.19 840 715 UPM0J821MPD6 applied at 105C for the condition listed at right.The peak voltage 6.3450V 2000hrs. 3000hrs. 5000hrs. 1000 1020 0.22 189 0.075 0.15 950 820 UPM0J102MPD shall not exceed the rated voltage. Endurance 1000 12.515 0.22 189 0.085 0.17 890 770 UPM0J102MHD6 Capacitance change Within 20% of the initial capacitance value 1200 1020 0.22 226.8 0.065 0.13 1060 930 UPM0J122MPD tan 200% or less than the initial specified value Leakage current Less than or equal to the initial specified value 1200 12.515 0.22 226.8 0.075 0.15 950 835 UPM0J122MHD6 1500 1025 0.22 283.5 0.055 0.11 1260 1130 UPM0J152MPD After storing the capacitors under no load at 105C Capacitance change Within 20% of the initial capacitance value for 1000 hours and then performing voltage treatment based 1500 12.515 0.22 283.5 0.065 0.13 1020 915 UPM0J152MHD6 6.3 Shelf Life tan 150% or less than the initial specified value on JIS C 5101-4 clause 4.1 at 20C, they shall meet the 0J 1800 1031.5 0.22 340.2 0.050 0.10 1370 1230 UPM0J182MPD Leakage current Less than or equal to the initial specified value characteristic requirements listed at right. 1800 1615 0.22 340.2 0.055 0.11 1270 1140 UPM0J182MHD6 Marking Printed with white color letter on dark brown sleeve. 2200 1031.5 0.24 415.8 0.043 0.086 1470 1320 UPM0J222MPD Radial Lead Type Frequency coefficient of rated ripple current 2200 1615 0.24 415.8 0.049 0.098 1340 1200 UPM0J222MHD6 d Sleeve (P.E.T.) 2700 12.525 0.24 510.3 0.038 0.076 1700 1530 UPM0J272MHD Rated voltage Frequency coefficient 15000 2700 1815 0.24 510.3 0.044 0.088 1500 1350 UPM0J272MHD6 10000 3300 12.525 0.26 623.7 0.034 0.068 1710 1530 UPM0J332MHD 6800 3300 1815 0.26 623.7 0.039 0.078 1600 1440 UPM0J332MHD6 4700 3300 3900 12.531.5 0.26 737.1 0.031 0.062 1980 1780 UPM0J392MHD Pressure 2200 relief vent MIN MIN 3900 1620 0.26 737.1 0.036 0.072 1770 1590 UPM0J392MHD6 + MAX. 15 4 L (6.3up) 1500 (mm) 4700 12.535.5 0.28 888.3 0.028 0.056 2230 2000 UPM0J472MHD 1000 (D < 10) 1.5 D 5 6.3 8 10 12.5 16 18 680 4700 1820 0.28 888.3 0.032 0.064 1920 1720 UPM0J472MHD6 > (D 10) 2.0 = P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 470 5600 12.540 0.30 1058.4 0.026 0.052 2460 2210 UPM0J562MHD d 0.5 0.5 0.6 0.6 0.6 0.8 0.8 330 6.3 to 100V 5600 1820 0.30 1058.4 0.030 0.060 1980 1780 UPM0J562MHD6 In case L > 25 for the 12.5 dia. unit, lead dia. d = 0.8mm. 220 (10kHz to 150 6800 1631.5 0.32 1285.2 0.024 0.048 2510 2250 UPM0J682MHD 200kHz=1) Please refer to the Guidelines for Aluminum Electrolytic Capacitors 100 6800 1825 0.32 1285.2 0.027 0.054 2350 2110 UPM0J682MHD6 for end seal configuration information. 68 8200 1635.5 0.36 1549.8 0.022 0.044 2770 2490 UPM0J822MHD 47 Type numbering system (Example : 25V 470F) 33 8200 1831.5 0.36 1549.8 0.025 0.050 2600 2340 UPM0J822MHD6 120Hz 300Hz 1kHz 1 2 3 4 5 6 7 8 9 10 11 12 22 10000 1640 0.40 1890 0.020 0.040 3110 2790 UPM0J103MHD U P M 1 E 4 7 1 M P D 15 Size code 10000 1831.5 0.40 1890 0.023 0.046 2720 2440 UPM0J103MHD6 10 2.2 Configuration Type Code 12000 1835.5 0.44 2268 0.019 0.038 3050 2740 UPM0J123MHD 00.5 0.60.7 0.80.9 1.0 Frequency coefficient Capacitance tolerance ( 20%) Small Dia 15000 1840 0.50 2835 0.018 0.036 3300 2970 UPM0J153MHD Low Profile 6 Rated capacitance (470F) 50Hz 120Hz 300Hz 1kHz 10kHz or more 68 511 0.19 20.4 0.80 1.60 155 97 UPM1A680MDD 160 to 450V 0.80 1.00 1.25 1.40 1.60 Rated voltage (25V) 82 511 0.19 24.6 0.65 1.30 175 110 UPM1A820MDD Series name 100 6.311 0.19 30 0.55 1.10 210 135 UPM1A101MED Type 10 120 6.311 0.19 36 0.44 0.88 235 160 UPM1A121MED 1A Configuration 150 6.311 0.19 45 0.35 0.70 265 185 UPM1A151MED Pb-free leadwire D Pb-free PET sleeve 180 6.311 0.19 54 0.29 0.58 290 205 UPM1A181MED 5 DD 220 6.315 0.19 66 0.24 0.48 370 270 UPM1A221MED 6.3 ED 8 10 PD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit). 12.5 to 18 HD If there is no size code in the part number, please add size code 1 and then add the appropriate code. Dimension table in next page. CAT.8100K +0.5 MAX. D 0.5 P Cap.(F)