ALUMINUM ELECTROLYTIC CAPACITORS Miniature Sized, Low Impedance, For Switching Power Supplies UPS (Through 100V only) Wide temperature range type, miniature sized. Compliant to the RoHS directive (2011/65/EU). UPJ Smaller UPS Specifications Item Performance Characteristics Category Temperature Range 55 to +105C (6.3 to 100V), 40 to +105C (160 to 400V), 25 to +105C (450V) Rated Voltage Range 6.3 to 450V Rated Capacitance Range 0.47 to 15000F Capacitance Tolerance 20% at 120Hz, 20C Rated voltage (V) 6.3 to 100 160 to 450 < Leakage Current After 1 minute s application of rated voltage at 20C, leakage current CV 1000 : I= 0.1CV+40 (A)max. = Leakage current is not more than 0.03CV or 4 (A) , whichever is greater. CV > 1000 : I= 0.04CV+100 (A)max. For capacitance of more than 1000F, add 0.02 for every increase of 1000F Measurement frequency : 120Hz at 20C Rated voltage (V) 6.3 10 16 25 35 50 63 100 160 to 250 315 350 400 450 Tangent of loss angle (tan ) tan (MAX.) 0.24 0.20 0.16 0.14 0.12 0.10 0.09 0.08 0.15 0.20 0.25 Measurement frequency : 120Hz Rated voltage (V) 6.3 10 16 25 35 50 63 100 160 200 250 315 350 400 450 Z25C / Z+20C 2 3 3 4 6 15 Stability at Low Temperature Impedance ratio Z40C / Z+20C 3 4 6 8 10 (MAX.) Z55C / Z+20C 5 4 3 The specifications listed at right shall be met when the Capacitance change Within 20% of the initial capacitance value capacitors are restored to 20C after D.C. bias plus rated ripple Endurance tan 200% or less than the initial specified value current is applied for 3000 hours (2000 hours for D= 5 to 10) at Leakage current Less than or equal to the initial specified value 105C, the peak voltage shall not exceed the rated voltage. After storing the capacitors under no load at 105C for 1000 hours and then performing voltage treatment based on JIS C Shelf Life 5101-4 clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on dark brown sleeve. Radial Lead Type Type numbering system (Example : 25V 470F) ( ) Sleeve P.E.T. d 1 2 3 4 5 6 7 8 9 10 11 12 U P S 1 E 4 7 1 M P D Size code Configuration Capacitance tolerance (20%) Rated capacitance (470F) Rated voltage (25V) Series name Pressure relief vent + MIN MIN MAX. 15 4 (6.3up) L Type (mm) Configuration (L < 20) 1.5 D 5 6.3 8 10 12.5 16 18 20 22 25 Pb-free leadwire D Pb-free PET sleeve (L 20) 2.0 P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 10.0 10.0 12.5 5 DD d 0.5 0.5 0.6 0.6 0.6 0.8 0.8 1.0 1.0 1.0 6.3 ED 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 1.0 1.0 8 10 PD 12.5 to 18 HD 20 to 25 RD Please refer to page 20 about the end seal configuration. Frequency coefficient of rated ripple current Frequency V 50Hz 120Hz 300Hz 1kHz 10kHz or more Cap.(F) 0.17 0.40 0.65 1.00 2.2 to 47 00 100 to 220. 0.30 0.50 0.65 0.80 1.00 6.3 to 100 330 to 680. 0.57 0.71 0.82 0.90 1.00 . 1000 to 15000 0.75 0.87 0.96 0.98 1.00 0.47 to 2200 0.80 1.00 1.25 1.40 1.60 160 to 450 330 to 470. 0.90 1.00 1.10 1.13 1.15 Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next pages. 236 + MAX. D 0.5 PCode Code ALUMINUM ELECTROLYTIC CAPACITORS UPS Standard Ratings D L (mm) V (Code) 6.3 (0J) 10 (1A) 16 (1C) 25 (1E) Case size Impedance Rated ripple Case size Impedance Rated ripple Case size Impedance Rated ripple Case size Impedance Rated ripple Item () MAX. (mArms) () MAX. (mArms) () MAX. (mArms) () MAX. (mArms) D L D L D L D L (mm) 20C/100kHz 105C/100kHz (mm) 20C/100kHz 105C/100kHz (mm) 20C/100kHz 105C/100kHz (mm) 20C/100kHz 105C/100kHz Cap. (F) 4.7 4R7 5 11 1.50 160 10 100 5 11 1.50 160 5 11 1.50 160 5 11 5 11 5 11 5 11 22 220 1.50 160 1.50 160 1.50 160 1.50 160 33 330 5 11 1.50 160 5 11 1.50 160 5 11 1.50 160 5 11 1.50 160 47 470 5 11 1.50 160 5 11 1.50 160 5 11 1.50 160 5 11 1.50 160 100 101 5 11 1.50 160 5 11 1.50 160 6.3 11 0.50 250 6 .3 11 0.50 250 150 151 6.3 11 0.50 250 6 .3 11 0.50 250 6 .3 11 0.50 250 8 11.5 0.28 410 220 221 6 .3 11 0.50 250 6.3 11 0.50 250 8 11.5 0.28 410 8 11.5 0.28 410 330 331 6.3 11 0.50 250 8 11.5 0.28 410 8 11.5 0.28 410 10 12.5 0.19 600 470 471 8 11.5 0.28 410 8 11.5 0.28 410 10 12.5 0.19 600 1 0 16 0.14 800 680 681 10 12.5 0.19 600 10 12.5 0.19 600 10 16 0.14 800 1 0 20 0.11 1000 1000 102 10 12.5 0.19 600 10 16 0.14 800 10 20 0.11 1000 1 2.5 20 0.075 1250 1500 152 10 20 0.11 1000 10 20 0.11 1000 12.5 20 0.075 1250 16 25 0.038 1900 2200 222 1 2.5 20 0.075 1250 1 2.5 20 0.075 1250 1 2.5 25 0.057 1550 16 25 0.038 1900 1 2.5 20 12.5 25 16 25 3300 332 0.075 1250 0.057 1550 0.038 1900 16 31.5 0.033 2350 4700 472 16 25 0.038 1900 1 6 25 0.038 1900 1 6 31.5 0.033 2350 1 8 35.5 0.030 2700 6800 682 16 25 0.038 1900 1 6 31.5 0.033 2350 1 8 35.5 0.030 2700 18 40 0.027 3300 10000 103 1 6 31.5 0.033 2350 1 8 35.5 0.030 2700 18 40 0.027 3300 15000 153 18 35.5 0.030 2700 18 40 0.027 3300 V (Code) 35 (1V) 50 (1H) 63 (1J) 100 (2A) Case size Impedance Rated ripple Case size Impedance Rated ripple Case size Impedance Rated ripple Case size Impedance Rated ripple Item () MAX. (mArms) () MAX. (mArms) () MAX. (mArms) () MAX. (mArms) D L D L D L D L (mm) 20C/100kHz 105C/100kHz (mm) 20C/100kHz 105C/100kHz (mm) 20C/100kHz 105C/100kHz (mm) 20C/100kHz 105C/100kHz Cap. (F) 2.2 2R2 5 11 4.50 55 5 11 9.80 44 3.3 3R3 5 11 3.90 65 5 11 6.60 58 4.7 4R7 5 11 1.50 160 5 11 3.50 90 5 11 4.70 68 5 11 4.60 74 10 100 5 11 1.50 160 5 11 2.10 120 5 11 2.10 110 6.3 11 1.80 130 22 220 5 11 1.50 160 5 11 1.80 150 6.3 11 0.98 180 8 11.5 0.68 230 5 11 33 330 1.50 160 6.3 11 0.65 250 6 .3 11 0.71 220 10 12.5 0.46 320 470 6 .3 11 0.50 250 0.65 250 0.65 310 10 16 0.37 420 47 6 .3 11 8 11.5 101 8 11.5 0.28 410 0.36 340 10 12.5 0.31 390 1 2.5 20 0.18 580 100 8 11.5 150 151 8 11.5 0.28 410 1 0 12.5 0.26 490 10 16 0.25 440 12.5 25 0.13 710 220 221 1 0 12.5 0.19 600 10 16 0.18 650 1 0 20 0.20 700 1 6 25 0.10 890 330 331 1 0 16 0.14 800 1 0 20 0.15 810 12.5 20 0.12 980 1 6 25 0.090 1080 470 471 10 20 0.11 1000 1 2.5 20 0.13 1100 12.5 25 0.081 1200 16 31.5 0.076 1310 680 681 1 2.5 20 0.075 1250 12.5 25 0.10 1200 16 25 0.058 1300 16 35.5 0.064 1410 1000 102 12.5 25 0.057 1550 16 25 0.058 1600 16 31.5 0.049 1380 1 8 40 0.047 1520 1500 152 1 6 25 0.038 1900 16 31.5 0.040 2000 1 8 35.5 0.038 1750 2200 222 16 31.5 0.033 2350 18 35.5 0.035 2300 18 40 0.032 2120 3300 332 1 8 35.5 0.030 2700 4700 472 1 8 40 0.027 3300 V 160 200 250 315 350 400 450 2C 2D 2E 2F 2V 2G 2W Cap.(F) Code 0.47 R47 6.3 11 12 6.3 11 12 6.3 11 12 8 11.5 11 8 11.5 11 1 010 6.3 11 17 6.3 11 17 6.3 11 17 8 11.5 16 10 12.5 17 10 12.5 16 10 12.5 18 2.2 2R2 6.3 11 25 6.3 11 25 8 11.5 29 10 12.5 28 10 16 31 10 16 27 10 20 29 3.3 3R3 8 11.5 36 8 11.5 36 10 12.5 42 10 12.5 34 10 16 38 10 20 36 12.5 20 41 4.7 4R7 8 11.5 43 10 12.5 50 10 12.5 50 10 16 45 10 20 49 10 20 43 12.5 20 49 10 100 10 12.5 70 10 16 80 10 20 88 10 20 72 12.5 20 82 12.5 25 72 16 25 75 22 220 10 20 130 10 20 140 12.5 25 155 12.5 25 120 16 25 130 16 25 110 16 31.5 115 33 330 12.5 20 180 12.5 25 190 12.5 25 190 16 25 155 16 31.5 160 16 31.5 140 18 35.5 145 47 470 12.5 25 220 12.5 25 220 16 25 230 16 35.5 190 18 35.5 200 18 35.5 170 20 40 175 100 101 16 25 330 16 31.5 335 18 35.5 340 18 40 285 20 40 290 22 50 350 25 50 350 221 220 18 35.5 500 18 40 515 20 40 525 22 50 540 25 50 550 330 331 900 1100 1150 20 40 22 40 22 50 Case size Rated ripple 470 471 22 50 1200 22 50 1310 25 50 1350 D L (mm) Rated ripple current (mArms ) at 105C 120Hz Size 2031 is available for capacitors marked Size 2035 is available for capacitors marked In this case, 6 will be put at 12th digit of type numbering system. 237