Code ALUMINUM ELECTROLYTIC CAPACITORS 7mmL, For General 7mmL, High CV Purposes SA series SR series Smaller (SR series) Standard miniature series with Higher CV series with 7mm ST 7mm height. height. High Temperature Compliant to the RoHS directive (2011/65/EU). Bi-polarized SP SA Smaller SR Specifications Item SA series SR series Category Temperature Range 40 to +85C 40 to +85C Rated Voltage Range 6.3 to 50V 4 to 50V Rated Capacitance Range 0.1 to 220F 0.1 to 470F Capacitance Tolerance 20% at 120Hz, 20C Leakage Current After 2 minutes application of rated voltage at 20C, leakage current is not more than 0.01CV or 3 (A), whichever is greater. Measurement frequency : 120Hz at 20 C Rated voltage (V) 4 6.3 10 16 25 35 50 Tangent of loss angle (tan ) tan (MAX.) 0.35 0.24 0.20 0.16 0.14 0.12 0.10 Measurement frequency : 120Hz Rated voltage (V) 4 6.3 10 16 25 35 50 Stability at Low Temperature Impedance ratio Z25C / Z+20C 6 4 3 2 2 2 2 ZT / Z20 (MAX.) Z40C / Z+20C 12 8 6 4 4 3 3 Capacitance change Within 20% of the initial capacitance value The specifications listed at right shall be met when the Endurance capacitors are restored to 20C after the rated voltage is tan 200% or less than the initial specified value applied for 2000 hours at 85C. Leakage current Less than or equal to the initial specified value After storing the capacitors under no load at 85C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at Shelf Life 20C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on black sleeve. Type numbering system (Example : SA series : 10V 33F) Radial Lead Type 1 2 3 4 5 6 7 8 9 10 11 1 2 3 4 5 6 7 8 9 10 11 ( ) d Sleeve P.E.T. U S A 1 A 3 3 0 M D D ( ) Sleeve P.E.T. d U S A 1 A 3 3 0 M D D Configuration Capacitance tolerance (20%) Configuration Rated capacitance (33F) Capacitance tolerance (20%) (mm) Rated voltage (10V) +1MAX MIN MIN Rated capacitance (33F) L 15 4 D 4 5 6.3 8 Series name Rated voltage (10V) (mm) +1MAX P 1.5 2.0 2.5 3.5 Type MIN MIN L 15 4 D 4 5 6.3 8 Series name d 0.45 0.45 0.45 0.5 Configuration P 1.5 2.0 2.5 3.5 Type Pb-free leadwire D Pb-free PET sleeve d 0.45 0.45 0.45 0.5 Configuration 4 to 8 DD Pb-free leadwire D Dimensions Pb-free PET sleeve V(Code) 4 (0G) 6.3 (0J) 10 (1A) 16 (1C) 4 to 8 25 (1E) DD 35 (1V) 50 (1H) Series Cap.(F) SR SA SR SA SR SA SR SA SR SA SR SA SR 4 7 4 7 0.1 0R1 1.0 1.0 4 7 4 7 0.22 R22 2.3 2.3 4 7 4 7 0.33 R33 3.5 3.5 4 7 4 7 0.47 R47 5.0 5.0 4 7 4 7 1 010 10 10 4 7 4 7 2.2 2R2 19 19 4 7 4 7 3.3 3R3 24 24 4 7 4 7 5 7 4 7 4.7 4R7 24 24 29 28 4 7 4 7 5 7 4 7 5 7 4 7 6.3 7 5 7 10 100 28 28 33 28 36 31 44 38 4 7 4 7 5 7 4 7 5 7 4 7 6.3 7 5 7 6.3 7 5 7 8 7 6.3 7 22 220 34 34 38 35 44 39 51 48 57 52 65 58 4 7 5 7 4 7 5 7 4 7 6.3 7 5 7 6.3 7 5 7 8 7 6.3 7 8 7 33 330 33 42 40 47 43 57 55 63 58 72 65 75 4 7 5 7 4 7 6.3 7 5 7 6.3 7 5 7 8 7 6.3 7 8 7 47 470 39 50 48 59 59 68 65 78 71 85 5 7 6.3 7 5 7 8 7 6.3 7 8 7 6.3 7 8 7 100 101 65 77 78 96 87 107 98 115 6.3 7 8 7 6.3 7 8 7 8 7 220 221 110 130 120 145 150 8 7 8 7 330 331 165 180 8 7 Case size D L (mm) 470 471 Rated ripple 240 Rated ripple current (mArms) at 85C 120Hz Frequency coefficient of rated ripple current Please refer to page 20, 21, 22 about the formed or taped product spec. Frequency 50 Hz 120 Hz 300 Hz 1 kHz 10 kHz or more Please refer to page 4 for the minimum order quantity. Coefficient 0.70 1.00 1.17 1.36 1.50 CAT.8100D +0.5MAX D +0.5MAX D 0.5 P 0.5 P