ALUMINUM ELECTROLYTIC CAPACITORS ALUMINUM ELECTROLYTIC CAPACITORS Chip Type, Low Impedance UUD UUD Dimensions Chip type, low impedance temperature range up to +105C. Designed for surface mounting on high density PC board. Leakage Current Rated Voltage Rated Impedance Rated Ripple Applicable to automatic mounting machine fed with carrier tape. Case Size A V Capacitance tan MAX. mArms Part Number DLmm Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). at 20 after code F 20/100kHz 105/100kHz 2 minutes AEC-Q200 compliant. Please contact us for details. UWD 27 45.8 0.26 3 1.80 80 UUD0J270MCL1GS High Temp reflow 33 55.8 0.26 3 0.76 150 UUD0J330MCL1GS 47 55.8 0.26 3 0.76 150 UUD0J470MCL1GS UCD Low Impedance Low Impedance UWG UUD 56 55.8 0.26 3.528 0.76 150 UUD0J560MCL1GS 68 6.35.8 0.26 4.284 0.44 230 UUD0J680MCL1GS Specifications 100 6.35.8 0.26 6.3 0.44 230 UUD0J101MCL1GS 6.3 Item Performance Characteristics 150 6.35.8 0.26 9.45 0.44 230 UUD0J151MCL1GS 0J Category Temperature Range 55 to +105C 220 6.35.8 0.26 13.86 0.44 230 UUD0J221MCL1GS Voltage Range Rated 6.3 to 50V 330 6.37.7 0.26 20.79 0.34 280 UUD0J331MCL1GS Rated Capacitance Range 1 to 1500F Capacitance Tolerance 20% at 120Hz, 20C 470 810 0.28 29.61 0.17 450 UUD0J471MNL1GS Leakage Current After 2 minutes application of rated voltage at 20C, leakage current is not more than 0.01 CV or 3 (A), whichever is greater. 680 810 0.28 42.84 0.17 450 UUD0J681MNL1GS Measurement frequency : 120Hz at 20C Rated voltage (V) 6.3 10 16 25 35 50 Tangent of loss angle (tan ) 1000 810 0.28 63 0.17 450 UUD0J102MNL1GS ( ) is 8 over tan (MAX.) 0.26 (0.28) 0.20 (0.24) 0.16 (0.20) 0.14 (0.16) 0.12 (0.14) 0.12 (0.14) 1500 1010 0.28 94.5 0.09 670 UUD0J152MNL1GS Measurement frequency : 120Hz Rated voltage (V) 6.3 10 16 25 35 50 22 45.8 0.20 3 1.80 80 UUD1A220MCL1GS Stability at Low Temperature Z25C / Z+20C Impedance ratio 3 2 2 2 2 2 ZT / Z20 (MAX.) 27 55.8 0.20 3 0.76 150 UUD1A270MCL1GS Z55C / Z+20C 5 4 4 3 3 3 33 55.8 0.20 3.3 0.76 150 UUD1A330MCL1GS The specifications listed at right shall be met Capacitance change Within 30% of the initial capacitance value when the capacitors are restored to 20C after the tan 200% or less than the initial specified value Endurance 47 6.35.8 0.20 4.7 0.44 230 UUD1A470MCL1GS rated voltage is applied for 5000 hours (2000 Leakage current Less than or equal to the initial specified value hours for D = 4, 5 and 6.3) at 105C. 56 6.35.8 0.20 5.6 0.44 230 UUD1A560MCL1GS After storing the capacitors under no load at 105C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 Shelf Life 68 6.35.8 0.20 6.8 0.44 230 UUD1A680MCL1GS clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. 10 The capacitors are kept on a hot plate for 30 seconds, which is 100 6.35.8 0.20 10 0.44 230 UUD1A101MCL1GS Capacitance change Within 10% of the initial capacitance value 1A Resistance to soldering maintained at 250C. The capacitors shall meet the characteristic tan Less than or equal to the initial specified value 150 6.35.8 0.20 15 0.44 230 UUD1A151MCL1GS heat requirements listed at right when they are removed from the plate Leakage current Less than or equal to the initial specified value and restored to 20C. 220 6.37.7 0.20 22 0.34 280 UUD1A221MCL1GS Marking Black print on the case top. 330 810 0.24 33 0.17 450 UUD1A331MNL1GS 470 810 0.24 47 0.17 450 UUD1A471MNL1GS 680 1010 0.24 68 0.09 670 UUD1A681MNL1GS Chip Type Type numbering system (Example : 16V 22 F) 1000 1010 0.24 100 0.09 670 UUD1A102MNL1GS (4 to 6.3) Positive 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Plastic platform 15 45.8 0.16 3 1.80 80 UUD1C150MCL1GS U U D 1 C 2 2 0 M C L 1 G S C0.2 0.3MAX. Series Voltage (C:16V) 22 55.8 0.16 3.52 0.76 150 UUD1C220MCL1GS Taping code 27 55.8 0.16 4.32 0.76 150 UUD1C270MCL1GS Configuration 33 6.35.8 0.16 5.28 0.44 230 UUD1C330MCL1GS D Code Capacitance tolerance (20%) 4 to 6.3 CL 47 6.35.8 0.16 7.52 0.44 230 UUD1C470MCL1GS Rated capacitance (22F) H L0.3 8 10 NL Lot No. Capacitance Negative Rated voltage (16V) 56 6.35.8 0.16 8.96 0.44 230 UUD1C560MCL1GS Series name 16 68 6.35.8 0.16 10.88 0.44 230 UUD1C680MCL1GS 1C Type (8,10 ) 100 6.35.8 0.16 16 0.44 230 UUD1C101MCL1GS Positive Plastic platform 150 6.37.7 0.16 24 0.34 280 UUD1C151MCL1GS (mm) Voltage (V:35V) C0.2 0.3MAX. Series D L Trade mark 4 5.8 5 5.8 6.3 5.8 6.3 7.7 8 10 10 10 220 6.37.7 0.16 35.2 0.34 280 UUD1C221MCL1GS A 1.8 2.1 2.4 2.4 2.9 3.2 330 810 0.20 52.8 0.17 450 UUD1C331MNL1GS B 4.3 5.3 6.6 6.6 8.3 10.3 C 4.3 5.3 6.6 6.6 8.3 10.3 470 810 0.20 75.2 0.17 450 UUD1C471MNL1GS E 1.0 1.3 2.2 2.2 3.1 4.5 L 5.8 5.8 5.8 7.7 10 10 H 680 1010 0.20 108.8 0.09 670 UUD1C681MNL1GS L0.5 Lot No. Capacitance H 0.5 to 0.8 0.5 to 0.8 Negative 0.5 to 0.8 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1 Pressure relief vent Frequency coefficient of rated ripple current Voltage Frequency 50 Hz 120 Hz 300 Hz 1 kHz 10 kHz or more V 6.3 10 16 25 35 50 Coefficient j 0.35 0.50 0.64 0.83 1.00 Code A C E V H Dimension table in next page. CAT.8100K A2 A2 22C 100V UD UD D0.5 D0.5 B0.2 B0.2 0.5MAX. 0.5MAX. A0.2AE 0.2 A0.2AE 0.2ALUMINUM ELECTROLYTIC CAPACITORS ALUMINUM ELECTROLYTIC CAPACITORS Chip Type, Low Impedance UUD UUD Dimensions Chip type, low impedance temperature range up to +105C. Designed for surface mounting on high density PC board. Leakage Current Rated Voltage Rated Impedance Rated Ripple Applicable to automatic mounting machine fed with carrier tape. Case Size A V Capacitance tan MAX. mArms Part Number DLmm Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). at 20 after code F 20/100kHz 105/100kHz 2 minutes AEC-Q200 compliant. Please contact us for details. UWD 27 45.8 0.26 3 1.80 80 UUD0J270MCL1GS High Temp reflow 33 55.8 0.26 3 0.76 150 UUD0J330MCL1GS 47 55.8 0.26 3 0.76 150 UUD0J470MCL1GS UCD Low Impedance Low Impedance UWG UUD 56 55.8 0.26 3.528 0.76 150 UUD0J560MCL1GS 68 6.35.8 0.26 4.284 0.44 230 UUD0J680MCL1GS Specifications 100 6.35.8 0.26 6.3 0.44 230 UUD0J101MCL1GS 6.3 Item Performance Characteristics 150 6.35.8 0.26 9.45 0.44 230 UUD0J151MCL1GS 0J Category Temperature Range 55 to +105C 220 6.35.8 0.26 13.86 0.44 230 UUD0J221MCL1GS Voltage Range Rated 6.3 to 50V 330 6.37.7 0.26 20.79 0.34 280 UUD0J331MCL1GS Rated Capacitance Range 1 to 1500F Capacitance Tolerance 20% at 120Hz, 20C 470 810 0.28 29.61 0.17 450 UUD0J471MNL1GS Leakage Current After 2 minutes application of rated voltage at 20C, leakage current is not more than 0.01 CV or 3 (A), whichever is greater. 680 810 0.28 42.84 0.17 450 UUD0J681MNL1GS Measurement frequency : 120Hz at 20C Rated voltage (V) 6.3 10 16 25 35 50 Tangent of loss angle (tan ) 1000 810 0.28 63 0.17 450 UUD0J102MNL1GS ( ) is 8 over tan (MAX.) 0.26 (0.28) 0.20 (0.24) 0.16 (0.20) 0.14 (0.16) 0.12 (0.14) 0.12 (0.14) 1500 1010 0.28 94.5 0.09 670 UUD0J152MNL1GS Measurement frequency : 120Hz Rated voltage (V) 6.3 10 16 25 35 50 22 45.8 0.20 3 1.80 80 UUD1A220MCL1GS Stability at Low Temperature Z25C / Z+20C Impedance ratio 3 2 2 2 2 2 ZT / Z20 (MAX.) 27 55.8 0.20 3 0.76 150 UUD1A270MCL1GS Z55C / Z+20C 5 4 4 3 3 3 33 55.8 0.20 3.3 0.76 150 UUD1A330MCL1GS The specifications listed at right shall be met Capacitance change Within 30% of the initial capacitance value when the capacitors are restored to 20C after the tan 200% or less than the initial specified value Endurance 47 6.35.8 0.20 4.7 0.44 230 UUD1A470MCL1GS rated voltage is applied for 5000 hours (2000 Leakage current Less than or equal to the initial specified value hours for D = 4, 5 and 6.3) at 105C. 56 6.35.8 0.20 5.6 0.44 230 UUD1A560MCL1GS After storing the capacitors under no load at 105C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 Shelf Life 68 6.35.8 0.20 6.8 0.44 230 UUD1A680MCL1GS clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. 10 The capacitors are kept on a hot plate for 30 seconds, which is 100 6.35.8 0.20 10 0.44 230 UUD1A101MCL1GS Capacitance change Within 10% of the initial capacitance value 1A Resistance to soldering maintained at 250C. The capacitors shall meet the characteristic tan Less than or equal to the initial specified value 150 6.35.8 0.20 15 0.44 230 UUD1A151MCL1GS heat requirements listed at right when they are removed from the plate Leakage current Less than or equal to the initial specified value and restored to 20C. 220 6.37.7 0.20 22 0.34 280 UUD1A221MCL1GS Marking Black print on the case top. 330 810 0.24 33 0.17 450 UUD1A331MNL1GS 470 810 0.24 47 0.17 450 UUD1A471MNL1GS 680 1010 0.24 68 0.09 670 UUD1A681MNL1GS Chip Type Type numbering system (Example : 16V 22 F) 1000 1010 0.24 100 0.09 670 UUD1A102MNL1GS (4 to 6.3) Positive 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Plastic platform 15 45.8 0.16 3 1.80 80 UUD1C150MCL1GS U U D 1 C 2 2 0 M C L 1 G S C0.2 0.3MAX. Series Voltage (C:16V) 22 55.8 0.16 3.52 0.76 150 UUD1C220MCL1GS Taping code 27 55.8 0.16 4.32 0.76 150 UUD1C270MCL1GS Configuration 33 6.35.8 0.16 5.28 0.44 230 UUD1C330MCL1GS D Code Capacitance tolerance (20%) 4 to 6.3 CL 47 6.35.8 0.16 7.52 0.44 230 UUD1C470MCL1GS Rated capacitance (22F) H L0.3 8 10 NL Lot No. Capacitance Negative Rated voltage (16V) 56 6.35.8 0.16 8.96 0.44 230 UUD1C560MCL1GS Series name 16 68 6.35.8 0.16 10.88 0.44 230 UUD1C680MCL1GS 1C Type (8,10 ) 100 6.35.8 0.16 16 0.44 230 UUD1C101MCL1GS Positive Plastic platform 150 6.37.7 0.16 24 0.34 280 UUD1C151MCL1GS (mm) Voltage (V:35V) C0.2 0.3MAX. Series D L Trade mark 4 5.8 5 5.8 6.3 5.8 6.3 7.7 8 10 10 10 220 6.37.7 0.16 35.2 0.34 280 UUD1C221MCL1GS A 1.8 2.1 2.4 2.4 2.9 3.2 330 810 0.20 52.8 0.17 450 UUD1C331MNL1GS B 4.3 5.3 6.6 6.6 8.3 10.3 C 4.3 5.3 6.6 6.6 8.3 10.3 470 810 0.20 75.2 0.17 450 UUD1C471MNL1GS E 1.0 1.3 2.2 2.2 3.1 4.5 L 5.8 5.8 5.8 7.7 10 10 H 680 1010 0.20 108.8 0.09 670 UUD1C681MNL1GS L0.5 Lot No. Capacitance H 0.5 to 0.8 0.5 to 0.8 Negative 0.5 to 0.8 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1 Pressure relief vent Frequency coefficient of rated ripple current Voltage Frequency 50 Hz 120 Hz 300 Hz 1 kHz 10 kHz or more V 6.3 10 16 25 35 50 Coefficient j 0.35 0.50 0.64 0.83 1.00 Code A C E V H Dimension table in next page. CAT.8100K A2 A2 22C 100V UD UD D0.5 D0.5 B0.2 B0.2 0.5MAX. 0.5MAX. A0.2AE 0.2 A0.2AE 0.2