TF037-1001-D DRIVERS Dedicated to the Micro Blower TF037 series. The drivers enable users to vary the speed of the motor by adjusting the control voltage of the external input. Contents of the kit are Driver board and Harness (2 types). Wire Harness: for Driver-Blower connection for Driver-Power connection STANDARD SPECIFICATIONS Unless otherwise specified, the environmental conditions are 23C5C, normal humidity, and atmospheric pressure range 90 to 106kPa. No. Item Specification 1 Drivers(Dedicated to the Micro Blower TF037 series) Configuration 40,000 r/min 2 Rotational Speed reference value at 4.0kPa, 100L/min 3 29W max. at 4.0kPa, 100L/min Power Consumption 4 DC 24 V10% Rated Voltage 2.0 A max.(DC) 4.0 A max.(Pulse) 5 Max. Input Current Excluding inrush current 6 1.2 A max. at 4.0kPa, 100L/min Running Current 7 32 g max. Weight 8 Operating Temperature -10 50 C 9 Operating Humidity Range 10 90 %RH No condensation 10 -20 60 C Storage Temperature 11 10 90 %RH No condensation Storage Humidity Range To meet the Spec after the following test Sweep Kind of Vibration 10 22Hz amplitude 1mm 12 Non-operating Resistance to Vibration Frequency Range 22 50Hz 2 19.6m/s (2G) acceleration Sweep to-and-fro, approx. 5min. Test Time X, Y, Z directions, 60min. each To meet the Spec after the following test 2 Acceleration 294m/s (30G) 13 Non-operating Resistance to Shock 6ms Pulse Width Semi-sinusoidal wave Shock Waven X, Y, Z, directions, once per each direction Number of ShockTF037-1001-D MICRO BLOWER DRIVERS INTERFACE Manufacturer J.S.T. Mfg. Co., Ltd. Manufacturer J.S.T. Mfg. Co., Ltd. Part No. SM06B-PASS Part No. SM12B-PASS Pin No. Symbol Signal Pin No. Symbol Signal 1 Error Error Output 1 U Motor Coil 2 FG Rotational Speed Signal Output (FG) 2 W Motor Coil 3 BR Short brake Input 3 V Motor Coil 4 CNT Control Voltage Input 4 TH Thermistor Input 5 Vcc Power Supply Voltage Input 5 GND GND 6 H1+ 6 GND GND Hall Element 1 Input 7 H1- 8 H3+ Hall Element 3 Input 9 H3- 10 H2+ Hall Element 2 Input 11 H2- 12 Vcc Hall Element Power