NJG1161PCD 1.5GHzbandGPSandGLONASSFront-EndModule FEATURES GENERAL DESCRIPTION Supply voltage 1.5 to 3.3 V The NJG1161PCD is a front-end module (FEM) designed for GPS and GLONASS applications. This FEM offers low Low current consumption 3.6/4.6 mA typ. V = 1.8/2.8 V noise figure, high linearity, and high out-band rejection DD characteristics brought by included high performance low High gain 17.0/18.5 dB typ. V = 1.8/2.8 V DD noise amplifier (LNA), pre-filter, and post-filter. The stand-by Low noise figure mode contributes to reduce current consumption. 1.65/1.6 dB typ. VDD = 1.8/2.8 V, f = 1575 MHz This FEM operates in wide temperature range from -40 to 1.75/1.7 dB typ. V = 1.8/2.8 V, f = 1597 to 1606 MHz DD +105C. The NJG1161PCD is suitable for small size High out band rejection application by included two SAW filters, only two external 85 dBc typ. f = 704 to 915 MHz, relative to 1575 MHz components, and very small package HFFP10-CD that is 2.5 75 dBc typ. f = 1710 to 1980 MHz, relative to 1575 MHz x 2.5 mm. 72 dBc typ. f = 2400 to 2500 MHz, relative to 1575 MHz Integrated LNA, pre-filter, and post-filter Small package size TRUTH TABLE 2.5 mm x 2.5 mm (typ.), t = 0.63 mm (max.) H = V (H) L = V (L) CTL , CTL RoHS compliant and Halogen Free, MSL1 V Mode CTL H APPLICATION Active mode GPS and GLONASS receive application L Stand-by mode Active antenna, dashboard camera, and navigation GNSS module PIN CONFIGURATION BLOCK DIAGRAM (HFFP10-CD) PIN NO. SYMBOL DESCRIPTION 1 GND Ground terminal (Top view) 2 VCTL Control voltage terminal 3 VDD Supply voltage terminal 4 NC(GND) No connected terminal RF input terminal to 5 PreIN pre-filter 6 GND Ground terminal RF output terminal from 7 PreOUT pre-filter 8 LNAIN RF input terminal to LNA 9 NC(GND) No connected terminal RF output terminal from 10 PostOUT post-filter Ver. 2021.6.17 - 1 - NJG1161PCD PRODUCT NAME INFORMATION NJG1161 PCD (TE1) Part number Package Taping form ORDERING INFORMATION PACKAGE HALOGEN- TERMINAL WEIGHT PART NUMBER RoHS MARKING MOQ (pcs.) OUTLINE FREE FINISH (mg) NJG1161PCD HFFP10-CD Yes Yes Au 61B 18 3,000 ABSOLUTE MAXIMUM RATINGS Ta = +25C, Zs = Zl = 50 PARAMETER SYMBOL RATINGS UNIT Supply voltage VDD 5.0 V Control voltage VCTL 5.0 V (1) PIN (inband) +15 dBm Input power (2) PIN (outband) +27 dBm (3) Power dissipation P 580 mW D Operating temperature T -40 to +105 C opr Storage temperature T -40 to +110 C stg (1): V = 2.8 V, f = 1575, 1597 to 1606 MHz DD (2): VDD = 2.8 V, f = 50 to 1460, 1710 to 4000 MHz (3): 4-layer FR4 PCB with through-hole (101.5 x 114.5 mm), Tj = 110C POWER DISSIPATION VS.AMBIENT TEMPERATURE Please, refer to the following Power Dissipation and Ambient Temperature. (Please note a special attention should be paid in designing of thermal radiation.) Power Dissipation Ambient Temperature Characteristic Mounted on PCB 1000 900 800 700 600 500 400 300 200 100 0 -40 -25 0 25 50 75 100 105 Ambient Temperature Ta Ver. 2021.6.17 - 2 -