NJM2388F08 Nisshinbo

NJM2386/88 LOW DROPOUT VOLTAGE REGULATOR WITH ON/OFF CONTROL GENERAL DESCRIPTION PACKAGE OUTLINE The NJM2386/88 is a general purpose low dropout voltage regulators with ON/OFF control. The output current is up to 1.0A and dropout voltage is 0.2V typical at 500mA load. It features high maximum input voltage of 35V for a wide application range including TV, home appliances and power NJM2386DL3 NJM2388F modules. FEATURES High Maximum Input Voltage Up to 35V Low Dropout Voltage 0.2V typ. at Io=0.5A Output Current Io(max.)=1.0A ON/OFF Control (Active High) Internal Short Circuit Current Limit Internal Overvoltage Protection Internal Thermal Overload Protection Bipolar Technology Package Outline TO-252-5(NJM2386), TO-220F-4(NJM2388) PIN CONFIGURATION 5 GND 4 ON/OFF CONTROL 4 NC 3 GND 3 3 V OUT 2 V OUT 2 ON/OFF CONTROL 1 V IN 1 V IN NJM2386DL3 NJM2388F BLOCK DIAGRAM V V IN OUT Overvoltage Protection CONTROL ON/OFF Bandgap Control Reference Thermal Current Protection Limit GND Ver.2016-04-05 - 1 - NJM2386/88 OUTPUT VOLTAGE RANK LIST NJM2386DL3 NJM2388F Device Name V Device Name V OUT OUT NJM2386DL3-33 3.3V NJM2388F33 3.3V NJM2386DL3-05 5.0V NJM2388F05 5.0V NJM2386DL3-63 6.3V NJM2388F63 6.3V NJM2386DL3-08 8.0V NJM2388F08 8.0V NJM2386DL3-09 9.0V NJM2388F84 8.4V NJM2386DL3-12 12.0V NJM2388F09 9.0V NJM2388F10 10.0V NJM2388F12 12.0V ABSOLUTE MAXIMUM RATINGS (Ta=25 C) PARAMETER SYMBOL RATINGS UNIT Input Voltage V +35 V IN Control Voltage V +35(*1) V CONT NJM2386 1190(*2) / 3125(*3) mW Power Dissipation P D NJM2388 W 18(Tc<50 C) Operating Junction Temperature Range Tj -40 +150 C Operating Temperature Range Topr -40 +85 C Storage Temperature Range Tstg -50 +150 C (*1): When input voltage is less than +35V, the absolute maximum control voltage is equal to the input voltage. 2 (*2): Mounted on glass epoxy board. (76.2 114.3 1.6mm:based on EIA/JDEC standard size, 2Layers, Cu area 100mm ) (*3): Mounted on glass epoxy board. (76.2 114.3 1.6mm:based on EIA/JDEC standard, 4Layers) (For 4Layers: Applying 74.2 74.2mm inner Cu area and a thermal via hole to a board based on JEDEC standard JESD51-5) Ver.2016-04-05 - 2 -