NJM8801 High Quality Audio Dual Operational Amplifier GENERAL DESCRIPTION PACKAGE OUTLINE The NJM8801 is a high quality audio dual operational Amplifier with bipolar technology, strikes a balance between MUSES technology and mass-production technique. The original process tuning and the assembly technology, based on MUSES technology, make excellent sound and absorbing cost NJM8801E NJM8801VA3 increases. (SOP8 JEDEC 150 mil) (SSOP8) The characteristics like Low noise (4.5nV/Hz), Wide Bandwidth (15MHz) and low distortion (0.0005%) suitable for audio preamplifiers, active filters, and line amplifiers. NJM8801 packages are SOP8 JEDEC 150 mil and small SSOP8 with copper frame. FEATURES PIN CONFIGURATION Operating Voltage 2V to 18V Low Noise Voltage 4.5nV/Hz typ. 0.8uVrms typ. (RIAA) (Top View) PIN FUNCTION 1. A OUTPUT Low Distortion 0.0005% typ. 1 8 2. A -INPUT Wide GB 15MHz typ. 3. A +INPUT A 2 7 Slew Rate 5V/s typ. 4. V- 5. B +INPUT Input Offset Voltage 0.3mV typ. 3mV max. B 6. B -INPUT 3 6 Input Bias Current 100nA typ. 500nA max. 7. B OUTPUT 8.V+ Voltage Gain 110dB typ. 4 5 Bipolar Technology Package Outline SOP8 JEDEC 150 mil, SSOP8-A3 (copper frame) EQUIVALENT CIRCUIT ( 1/2 Shown ) + V OUTPUT -INPUT +INPUT - V Ver.2014-11-10 - 1 - NJM8801 ABSOLUTE MAXIMUM RATINGS (Ta=25C) PARAMETER SYMBOL RATING UNIT Supply Voltage V 18 V DD Common Mode Input Voltage Range V 15 (Note1) V ICM Differential Input Voltage Range V 30 V ID SOP8 JEDEC 150 mil: 550 (Note2) Power Dissipation P mW D SSOP8: 460 (Note2) Operating Temperature Range T -40~+85 C OPR Storage Temperature Range T -40~+125 C STG (Note 1) For supply Voltages less than 15V, the maximum input voltage is equal to the Supply Voltage. (Note 2) Mounted on the EIA/JEDEC standard board (114.376.21.6mm, two layer, FR-4). Refer to the following Power Dissipation and Ambient Temperature. RECOMMENDED OPERATING CONDITION (Ta=25C) PARAMETER SYMBOL TEST CONDITION MIN. TYP. MAX. UNIT + - Supply Voltage V /V 2 - 18 V ELECTRIC CHARACTERISTICS + - DC CHARACTERISTICS (V /V =15V, Vcm=0V, Ta=25C, unless otherwise specified) PARAMETER SYMBOL TEST CONDITION MIN. TYP. MAX. UNIT R =, No Signal Supply Current I L - 6 9 mA CC Input Offset Voltage V Rs10k (Note3) - 0.3 3 mV IO Input Bias Current I - 100 500 nA B Input Offset Current I (Note3) - 5 200 nA IO Voltage Gain A R 2k, Vo=10V, Rs10k 90 110 - dB V L Common Mode Rejection Ratio CMR V =12V, Rs10k 80 110 - dB ICM + - Supply Voltage Rejection Ratio SVR V /V =9.0 to 18V, Rs10k 80 110 - dB Maximum Output Voltage V R 2k 12 13.5 - V OM L Common Mode Input Voltage Range V CMR80dB 12 13.5 - V ICM (Note3) Written by the absolute rate. + - AC CHARACTERISTICS (V /V =15V, Vcm=0V, Ta=25C unless otherwise specified) PARAMETER SYMBOL TEST CONDITION MIN. TYP. MAX. UNIT Slew Rate SR R 2k - 5 - V/us L Gain Bandwidth Product GB f=10kHz - 15 - MHz Equivalent Input Noise Voltage e R =100 , f=1KHz - 4.5 - nV/Hz n S Equivalent Input Noise Voltage V RIAA, R =2.2k, 30kHz, LPF, NJM8801VA3 - 0.8 - Vrms NI S Equivalent Input Noise Voltage V RIAA, R =2.2k, 30kHz, LPF, NJM8801E - 0.8 1.4 Vrms NI S Total Harmonic Distortion THD f=1kHz ,A =+10, Vo=5Vrms, R =2k - 0.0005 - % V L Channel Separation CS f=1kHz , A =-100, R =1k, R =2k - 130 - dB V S L Ver.2014-11-10 - 2 -