RN5RK331A-TR-FE Nisshinbo

RN5RK SERIES VFM STEP-UP DC/DC CONVERTER NO.EA-045-181012 OUTLINE The RN5RKxx1A/xx1B/xx2A Series are CMOS-based VFM (Chopper) Step-up DC/DC converter ICs with ultra low supply current and high output voltage accuracy. Each of the RN5RKxx1A/xx1B consists of an oscillator, a VFM control circuit, a driver transistor to have low ON resistance (Lx switch), a reference voltage unit, a high speed comparator, resistors for voltage detection, an Lx switch protection circuit and an internal chip enable circuit. A low ripple, high efficiency step-up DC/DC converter can be composed of this RN5RKxx1A/xx1B with only three external components: an inductor, a diode and a capacitor. The RN5RKxx2A uses the same chip as what is employed in the RN5RKxx1A/1B IC and has a drive pin (EXT) for an external transistor instead of an Lx pin. As it is possible to load a large output current with a power transistor which has a low saturation voltage, RN5RKxx2A IC is recommendable to users who need an output current as large as between several tens mA and several hundreds mA. Using the chip enable function, it is possible to make the supply current on standby minimized. Since the package for these ICs is SOT-23-5, high density mounting of the ICs on board is possible. FEATURES Small Number of External Components .............................. Only an inductor, a diode and a capacitor (RN5RKxx1A/xx1B) Standby Current ................................................................... Typ. 0A Low Temperature-Drift Coefficient of Output Voltage........... Typ. 100ppm/C Output Voltage Range .......................................................... 2.0V to 5.5V Two Kinds of Duty Ratio ....................................................... 77% (xx1A, xx2A)/ 55% (xx1B) High Output Voltage Accuracy ............................................. 2.5% Small Packages ................................................................. SOT-23-5 High Efficiency ..................................................................... Typ. 85% (RN5RK301B, VIN=2V, IOUT=10mA) Low Ripple and Low Noise Including a Driver Transistor with Low ON Resistance ........ Only RN5RKxx1A/xx1B Low Start-up Voltage ............................................................ Max.0.9V APPLICATIONS Power source for battery-powered equipment. Power source for cameras, camcorders, VCRs, and hand-held communication equipment. Power source for those appliances which require higher cell voltage than that of batteries. 1 RN5RK NO.EA-045-181012 OUTLINE DIAGRAM RN5RKxx1x RN5RKxx2A Vref Vref VLX limiter V V Lx 5 OUT EXT 5 OUT 2 2 Buffer Buffer LxSW VFM Control VFM Control OSC 100kHz OSC 100kHz Error Amp. Error Amp. Chip Enable Chip Enable 4 4 GND GND 1 1 CE CE SELECTION GUIDE The output voltage, the driver type and the duty cycle for the ICs can be selected at the user s request. Product Name Package Quantity per Reel Pb Free Halogen Free RN5RKxx -TR-FE SOT-23-5 3,000 pcs xxThe output voltage can be designed in the range from 2.0V(20) to 5.5V(55) in 0.1V steps. Designation of Driver 1Internal Lx Tr. Driver 2External Tr. Driver Designation of Duty Cycle A77 B55 2