RP101x SERIES 0.6% ACCURACY LOW NOISE 300mA LDO REGULATOR NO.EA-167-160425 OUTLINE The RP101x Series are CMOS-based voltage regulator ICs with high output voltage accuracy, extremely low supply current, low ON-resistance, and high ripple rejection. Each of these ICs consists of a voltage reference unit, an error amplifier, resistor-net for voltage setting, a current limit circuit, and a chip enable circuit. These ICs perform with low dropout voltage and a chip enable function. The line transient response and load transient response of the RP101x Series are excellent, thus these ICs are very suitable for the power supply for hand-held communication equipment. The output voltage of these ICs is fixed with high accuracy. Since the packages for these ICs are SOT-23-5 and DFN(PLP)1612-4 (t0.6mm type) or DFN(PLP)1612-4B (t0.4mm type), therefore high density mounting of the ICs on boards is possible. FEATURES Supply Current ............................................................. Typ. 18A Standby Current ........................................................... Typ. 0.1A Dropout Voltage ............................................................ Typ. 0.13V (IOUT 150mA, VOUT 2.8V) Ripple Rejection ........................................................... Typ. 75dB (f1kHz) Temperature-Drift Coefficient of Output Voltage .......... Typ. 30ppm/C Line Regulation ............................................................ Typ. 0.02%/V Output Voltage Accuracy .............................................. 0.6% Packages ...................................................................... DFN(PLP)1612-4, DFN(PLP)1612-4B, SOT-23-5 Input Voltage Range ..................................................... 1.7V to 5.25V Output Voltage Range .................................................. 1.2V to 3.3V (0.1V steps) (For other voltages, please refer to MARK INFORMATIONS.) Built-in Fold Back Protection Circuit ............................. Typ. 40mA (Current at short mode) Ceramic capacitors are recommended to be used with this IC .... 1.0 F or more APPLICATIONS Power source for portable communication equipment. Power source for electrical appliances such as cameras, VCRs and camcorders. Power source for battery-powered equipment. Power source for home appliances. 1 RP101x NO.EA-167-160425 BLOCK DIAGRAMS RP101xxxxB RP101xxxxD VDD VOUT VDD VOUT Vref Vref Current Limit Current Limit CE CE GND GND SELECTION GUIDE The output voltage, auto discharge function, package, and the taping type, etc. for the ICs can be selected at the users request. Product Name Package Quantity per Reel Pb Free Halogen Free 5,000 pcs Yes Yes RP101Kxx1 -TR DFN(PLP)1612-4 (t0.6mm) 5,000 pcs Yes Yes RP101Kxx2 -TR DFN(PLP)1612-4B (t0.4mm) RP101Nxx1 -TR-FE SOT-23-5 3,000 pcs Yes Yes xx : The output voltage can be designated in the range from 1.2V(12) to 3.3V(33) in 0.1V steps. (For other voltages, please refer to MARK INFORMATIONS.) : CE pin polarity and auto discharge function at off state are options as follows. (B) active, without auto discharge function at off state (D) active, with auto discharge function at off state 2