RP103Qxx2 (SC-88A) is the discontinued product. As of April in 2016 RP103x SERIES LOW NOISE 150mA LDO REGULATOR NO.EA-149-160426 OUTLINE The RP103x Series are CMOS-based voltage regulator ICs with high output voltage accuracy, extremely low supply current, low ON-resistance, and high ripple rejection. Each of these ICs consists of a voltage reference unit, an error amplifier, resistor-net for voltage setting, a current limit circuit, and a chip enable circuit. These ICs perform with low dropout voltage and a chip enable function. The line transient response and load transient response of the RP103x Series are excellent, thus these ICs are very suitable for the power supply for hand-held communication equipment. The output voltage of these ICs is fixed with high accuracy. Since the packages for these ICs are DFN(PLP)1010-4, SC-82AB, SC-88A, SOT-23-5, therefore high density mounting of the ICs on boards is possible. FEATURES Supply Current ............................................................. Typ. 36A Standby Mode .............................................................. Typ. 0.1A Dropout Voltage ............................................................ Typ. 0.21V (IOUT=150mA, VOUT=2.8V) Ripple Rejection ........................................................... Typ. 75dB (f=1kHz) Temperature-Drift Coefficient of Output Voltage .......... Typ. 30ppm/C Line Regulation ............................................................ Typ. 0.02%/V Output Voltage Accuracy .............................................. 1.0% Packages ...................................................................... DFN(PLP)1010-4, SC-82AB, SC-88A, SOT-23-5 Input Voltage Range ..................................................... 1.7V to 5.25V Output Voltage Range .................................................. 1.2V to 3.3V (0.1V steps) (For other voltages, please refer to MARK INFORMATIONS.) Built-in Fold Back Protection Circuit ............................. Typ. 40mA (Current at short mode) Ceramic capacitors are recommended to be used with this IC .... 0.47F or more APPLICATIONS Power source for portable communication equipment. Power source for electrical appliances such as cameras, VCRs and camcorders. Power source for battery-powered equipment. Power source for home appliances. 1 RP103Qxx2 (SC-88A) is the discontinued product. As of April in 2016 RP103x NO.EA-149-160426 BLOCK DIAGRAMS RP103xxxxB RP103xxxxD VDD VDD VOUT VOUT Vref Vref Current Limit Current Limit CE CE GND GND SELECTION GUIDE The output voltage, auto discharge function, package, and the taping type, etc. for the ICs can be selected at the users request. Product Name Package Quantity per Reel Pb Free Halogen Free DFN(PLP)1010-4 10,000 pcs Yes Yes RP103Kxx1-TR SC-82AB 3,000 pcs Yes Yes RP103Qxx1-TR-FE RP103Qxx2-TR-FE SC-88A 3,000 pcs Yes Yes RP103Nxx1-TR-FE SOT-23-5 3,000 pcs Yes Yes xx: The set output voltage (V ) can be designated in the range from 1.2V to 3.3V in 0.1V steps. SET Exception: 1.85V=RP103x18x5-xx 2.85V=RP103x28x5-xx : CE pin polarity and auto discharge function at off state are options as follows. (B) active, without auto discharge function at off state (D) active, with auto discharge function at off state 2