RP109x SERIES LOW NOISE 150mA LDO REGULATOR NO.EA-204-170425 OUTLINE The RP109x Series are CMOS-based voltage regulator ICs with high output voltage accuracy, extremely low supply current, low ON-resistance, and high ripple rejection. Each of these ICs consists of a voltage reference unit, an error amplifier, a resistor-net for voltage setting, a current limit circuit and a chip enable circuit. These ICs perform with low dropout voltage and a chip enable function which prolong the battery life. The line transient response and load transient response of the RP109x Series are excellent, thus these ICs are very suitable for the power supply for hand-held communication equipment. RP109x Series contributes to the downsizing of the hand-held equipment because it can use the 0.1F ceramic capacitor. In addition to SOT-23-5, SC-88A and DFN1010-4 packages, a 0.8mm square ultra compact DFN(PLP)0808-4 package is also available. FEATURES Supply Current ............................................................. Typ. 50A Standby Mode .............................................................. Typ. 0.1A Dropout Voltage ............................................................ Typ. 0.25V (IOUT 150mA, VOUT 2.5V) Ripple Rejection ........................................................... Typ. 75dB (f1kHz, VOUT2.5V) Temperature-Drift Coefficient of Output Voltage .......... Typ. 100ppm/C (VOUT 1.8V) Typ. 30ppm/C (VOUT1.8V) Line Regulation ............................................................ Typ. 0.02%/V Output Voltage Accuracy .............................................. 1.0% Packages ...................................................................... DFN(PLP)0808-4, DFN1010-4, SC-88A, SOT-23-5 Input Voltage Range ..................................................... 1.4V to 5.25V Output Voltage Range .................................................. 0.8V to 3.6V (0.1V steps) (For other voltages, please refer to MARK INFORMATIONS.) Built-in Fold Back Protection Circuit ............................. Typ. 40mA (Current at short mode) Ceramic capacitors are recommended to be used with this IC .... 0.1 F or more APPLICATIONS Power source for portable communication equipment. Power source for electrical appliances such as cameras, VCRs and camcorders. Power source for battery-powered equipment. Power source for home appliances. 1 RP109x NO.EA-204-170425 BLOCK DIAGRAMS RP109xxxxB RP109xxxxD VDD VOUT VDD VOUT Vref Vref Current Limit Current Limit CE GND CE GND SELECTION GUIDE The output voltage, auto discharge function, package, and the taping type, etc. for the ICs can be selected at the users request. Product Name Package Quantity per Reel Pb Free Halogen Free RP109Kxx1 -TR DFN(PLP)0808-4 10,000 pcs Yes Yes RP109Lxx1 -TR DFN1010-4 10,000 pcs Yes Yes RP109Qxx2 -TR-FE SC-88A 3,000 pcs Yes Yes RP109Nxx1 -TR-FE SOT-23-5 3,000 pcs Yes Yes xx: Specify the set output voltage (V ) within the range of 0.8V to 3.6 in 0.1V steps. SET The second decimal point of V is described as below. SET 1.25V: RP109x12x5 1.85V: RP109x18x5 2.85V: RP109x28x5 : Select the polarity of the CE pin from (B) active without auto-discharge function or (D) active with auto-discharge function. 2