RP200Q (SC-88A) is the discontinued product as of January 2017. RP200Z (WLCSP-4-P5) is the limited product as of March 2020. RP200x SERIES 3-MODE 300mA LDO REGULATOR NO.EA-182-170126 OUTLINE The RP200x Series consist of CMOS-based voltage regulator ICs with high output voltage accuracy, low dropout voltage and low supply current. These ICs perform with the chip enable function and realize a standby mode with ultra low supply current. To prevent the destruction by over current, the current limit circuit is included. The RP200x Series have 3-mode. One is standby mode with CE pin. Other two modes are realized with ECO Function. Fast Response Mode (Fast Mode) and Fast and Low Power auto-change Mode (Auto ECO Mode) are alternative with Auto Eco pin (AE pin). Supply current of IC itself at light load is automatically reduced at Auto ECO Mode compared with Fast Mode. The output voltage is maintained between Fast Mode and Auto ECO Mode. Without AE pin type is also available. It is an LDO regulator with Auto ECO mode. (RP200Z in WLCSP.) Since the packages for these ICs are SOT-23-5, SC-88A, thin DFN(PLP)1212-6, and WLCSP-4-P5, high density mounting of the ICs on boards is possible. RP200Q (SC-88A), RP200K (DFN(PLP)1212-6) and RP200N (SOT-23-5) has AE pin, then if the AE pin is, Fast Mode is available. If the AE pin is set at level, Auto ECO Mode operation is available. FEATURES Supply Current (Low power Mode) .............................. Typ. 1.0A (VOUT 1.85V) Supply Current (Fast Mode) ......................................... Typ. 55A Supply Current (Standby Mode) .................................. Typ. 0.1A Ripple Rejection ........................................................... Typ. 70dB (f1kHz) Input Voltage Range .................................................... 1.4V to 5.25V Output Voltage Range .................................................. 0.8V to 4.0V (0.1V steps) (For other voltages, please refer to MARK INFORMATIONS.) Output Voltage Accuracy .............................................. 1.0% (VOUT > 2.0V, Topt 25 C) Temperature-Drift Coefficient of Output Voltage .......... Typ. 50ppm/C Dropout Voltage ........................................................... Typ. 0.23V (IOUT 300mA, VOUT 2.8V) Line Regulation ............................................................ Typ. 0.02%/V Packages ..................................................................... WLCSP-4-P5, DFN(PLP)1212-6, SC-88A, SOT-23-5 Built-in Fold Back Protection Circuit ............................ Typ. 50mA (Current at short mode) Ceramic capacitors are recommended ........................ 1.0 F APPLICATIONS Power source for portable communication equipment. Power source for electrical appliances such as cameras, VCRs and camcorders. Power source for battery-powered equipment. 1 RP200Q (SC-88A) is the discontinued product as of January 2017. RP200Z (WLCSP-4-P5) is the limited product as of March 2020. RP200x NO.EA-182-170126 BLOCK DIAGRAMS RP200K/N/QxxxB RP200Zxx1B AE VDD VOUT VDD VOUT Vref Vref Current Limit Current Limit CE CE GND GND RP200K/N/QxxxD RP200Zxx1D AE DD DD V VOUT V VOUT Vref Vref Current Limit Current Limit CE CE GND GND 2