CKM12BFW01 NKK Switches

High Security Keylocks Series CK General Specifications Electrical Capacity (Resistive Load) Power Level: 3A 250V AC Other Ratings Contact Resistance: 20 milliohms maximum Insulation Resistance: 1,000 megohms minimum 500V DC Dielectric Strength: 1,000V AC minimum between contacts for 1 minute minimum 1,500V AC minimum between contacts & case for 1 minute minimum Mechanical Life: 30,000 cycles minimum Electrical Life: 10,000 cycles minimum Static Capability: Withstands 15 kilovolts minimum ESD minimum (for CKM models only) Nominal Operating Torque: 16mm Bushing (CKM models): .04 mNm (5.67 ozin) for Flat Key .08 mNm (11.33 ozin) for Tubular Key 19mm Bushing (CKL models): .05 mNm (7.08 ozin) for Flat Key .07 mNm (9.91 ozin) for Tubular Key F Contact Timing: Break-before-make Angle of Throw: 90 for 2-position & 45 for 3-position Materials & Finishes Keys for CKM: Brass with nickel plating with ABS handle Keys for CKL: Brass with nickel plating for tubular key brass with chrome plating for flat key Housing/Bushing: Glass fiber reinforced PBT for CKM models zinc alloy with chrome plating for CKL Base: LCP (Liquid Crystal Polymer) Contact Terminals: Copper with silver plating Common Terminals: Copper with silver plating Movable Contactor: Copper Movable Contacts: Silver Environmental Data Operating Temperature Range: 25C through +70C (13F through +158F) Humidity: 90 ~ 95% humidity for 240 hours 40C (104F) for CKM 90 ~ 95% humidity for 96 hours 40C (104F) for CKL Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm for CKM or 0.7mm for CKL traversing the frequency range & returning in 1 minute 3 right angled directions for 2 hours 2 2 Shock: 50G (490m/s ) acceleration for CKM 30G (294m/s ) acceleration for CKL (CKM & CKL tested in 6 right angled directions, with 5 shocks in each direction) Installation Mounting Torque: 1.5 Nm (13.28 lbin) maximum Soldering Time & Temperature: Manual Soldering: See Profile A in Supplement section. www.nkkswitches.com F3 Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers TogglesSeries CK High Security Keylocks Distinctive Characteristics High insulating material for 16mm CKM models withstands over 15 kilovolts of electrostatic discharge, thus providing antistatic feature. Rugged, die cast housing 19mm CKL models designed for higher security requirements. Vertically rotating switching mechanism combines with self-cleaning sliding contacts for high reliability and long operating life. 16mm and 19mm diameter bushings available. F CKL and CKM on-off-on models with tubular keys have push-and-lock mechanism which allows contactor to drop and slide over stationary contacts. Available in both flat and tubular key styles flat key is reversible for easier setting. Epoxy sealed terminals prevent entry of flux and other contaminants. Actual Size CKM with Tubular Key Interior construction provides seal for contact area. High dielectric strength of 1,500 volts between contacts and case. F4 www.nkkswitches.com Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Toggles