Light Duty Miniature Toggles Series E Distinctive Characteristics Power and logic level capabilities available to suit varying applications. High torque bushing prevents rotation and separation from metal frame during installation. Stainless steel frame resists corrosion. Case of heat resistant resin meets UL94V-0 flammability rating. Antijamming design protects contact mechanism from damage if lever is subjected to sharp downward force or other harsh treatment. Bias guard achieved by interlocking actuator block with lever and interior guide diagonal force on toggle is not transmitted to actuator block and misalignment of contacts is prevented. Higher insulating barriers protect against crossover in double pole devices. 1,500V dielectric strength between contacts and case is accomplished by clinching the frame away from the terminals. Epoxy sealed terminals prevent entry of solder flux and other contaminants. Actual Size NKK Switches email: sales nkkswitches.com Phone (480) 991-0942 Fax (480) 998-1435 www.nkkswitches.com 2-06Light Duty Miniature Toggles Series E General Specifications Electrical Capacity (Resistive Load) Power Level (No Code or P): 3A 125V AC for silver contacts Logic Level (code G or PG): 0.4VA maximum 28V AC/DC maximum for gold contacts (Applicable Range 0.1mA ~ 0.1A 20mV ~ 28V) Note: Find additional explanation of operating range in Supplement section. Other Ratings Contact Resistance: 10 milliohms maximum for silver 20 milliohms maximum for gold Insulation Resistance: 1,000 megohms minimum 500V DC Dielectric Strength: 1,000V AC minimum between contacts for 1 minute minimum 1,500V AC minimum between contacts & case for 1 minute minimum Mechanical Life: 100,000 operations minimum Electrical Life: 20,000 operations minimum for silver 50,000 operations minimum for gold Angle of Throw: 25 Materials & Finishes Toggle: Brass with chrome plating Bushing: Brass with nickel plating Frame: Stainless steel Case: Melamine phenolic resin (UL94V-0) Movable Contacts: Copper with silver or gold plating Stationary Contacts: Silver with silver or gold plating Terminals: Copper with silver or gold plating Environmental Data Operating Temp Range: 10C through +70C (+14F through +158F) Humidity: 90 ~ 95% humidity for 96 hours 40C (104F) Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute 3 right angled directions for 2 hours 2 Shock: 50G (490m/s ) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) Installation Mounting Torque: 1.47Nm (13 lbin) for double nut .686Nm (6 lbin) for single nut Soldering Time & Temp: Circuits 2 & 5 Manual Soldering: 3 seconds maximum 350C maximum Wave Solder: 5 seconds maximum 270C maximum. Circuits 1, 3, 8, & 9 Manual Soldering: 4 seconds maximum 410C maximum Wave Solder: See Prolfi e A in Supplement section. Note: On circuits 1, 3, 8, & 9 levers must be in center or off position while soldering. Standards & Certifications Flammability Standards: UL94V-0 case UL Recognized: All single & double pole models recognized at 3A 125V AC UL File No. WOYR2.E44145 add /U to end of part number to order UL mark on switch. CSA Certified: Single pole, double throw solder lug & PC models certified at 3A 125V AC double pole, double throw PC models certified at 3A 125V AC CSA File No. 023535-0-000 add /C to end of part number to order CSA mark on switch. NKK Switches email: sales nkkswitches.com Phone (480) 991-0942 Fax (480) 998-1435 www.nkkswitches.com 2-06