EB2085-A-J52AC NKK Switches

Series EB Light Touch Miniature Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A 125V AC for silver contacts Logic Level (gold): 0.4VA maximum 28V AC/DC maximum for gold contacts (Applicable Range 0.1mA ~ 0.1A 20mV ~ 28V) Note: Find additional explanation of operating range in Supplement section. C Other Ratings Contact Resistance: 10 milliohms maximum for silver 20 milliohms maximum for gold Insulation Resistance: 1,000 megohms minimum 500V DC Dielectric Strength: 1,000V AC minimum between contacts for 1 minute minimum 1,500V AC minimum between contacts and case for 1 minute minimum Mechanical Life: 100,000 operations minimum Electrical Life: 25,000 operations minimum for silver 50,000 operations minimum for gold Nominal Operating Force: Single Pole: 1.75N for Momentary and 2.49N for Alternate Action Double Pole: 2.30N for Momentary and 3.05N for Alternate Action Travel: Momentary: Pretravel .047 (1.2mm) Overtravel .016 (0.4mm) Total Travel .063 (1.6mm) Alternate: Pretravel .071 (1.8mm) Overtravel .016 (0.4mm) Total Travel .087 (2.2mm) Materials & Finishes Plunger: Brass with nickel plating Bushing: Brass with nickel plating Frame: Stainless steel Case: Melamine phenolic resin (UL94V-0) Movable Contacts: Copper with silver or gold plating Stationary Contacts: Silver & copper with silver or gold plating Terminals: Copper with silver or gold plating Environmental Data Operating Temp Range: 10C through +70C (+14F through +158F) Humidity: 90 ~ 95% humidity for 96 hours 40C (104F) Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute 3 right angled directions for 2 hours 2 Shock: 50G (490m/s ) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) Installation Mounting Torque: 1.47Nm (13.0 lbin) for double nut 0.68Nm (6.0 lbin) for single nut Cap Installation Force: 78.5N (17.65 lbf) maximum downward force on actuator Soldering Time & Temp: Wave Solder (Straight PC): See Profile B in Supplement section. Manual Soldering: See Profile B in Supplement section. Cleaning: These devices are not process sealed. Hand clean locally using alcohol based solution. Standards & Certifications Flammability Standards: UL94V-0 case UL: File No. E44145 - Recognized only when ordered with marking on switch. Add /U or /CUL before rfi st dash in part number to order UL recognized switch. All single and double pole models recognized at 3A 125V AC. CSA: File No. 023535 0 000 - Certified only when ordered with marking on switch. Add /C before rfi st dash in part number to order CSA certified switch. Single pole solder lug and PC models certified at 3A 125V AC double pole PC models certified at 3A 125V AC. C24 www.nkkswitches.com 11/ 10 /20 Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers TogglesLight Touch Miniature Pushbuttons Series EB Distinctive CharacteristicsDistinctive Characteristics Power and logic level capabilities available to suit varying applications. Bushing and snap-in mount versions available snap-in models offer C many style and color choices to enhance front panel appearance. Light touch actuation. High torque bushing prevents rotation and separation from metal frame during installation. Stainless steel frame resists corrosion. Case of heat resistant resin meets UL 94V-0 flammability rating. Higher insulating barriers protect against crossover in double pole devices. 1,500V dielectric strength between contacts and case is accomplished by clinching the frame away from the terminals. Epoxy sealed terminals prevent entry of solder flux and other contaminants. Actual Size Bushing Mount Page C26 Snap-in Mount Page C30 www.nkkswitches.com C25 Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Toggles